建立省级环境与健康调查及风险评估体系研究思路——以江苏省探索实践为例

以环境与健康调查及风险评估研究为出发点,江苏省于2018年设立了"江苏省环境与健康调查与风险评估体系建设"环保科研重大技术攻关类项目,根据江苏省行业、地区、流域特点以及江苏省环境与健康调查及风险评估工作基础,结合国内环境与健康研究现状,深入开展典型行业、地区、流域环境与健康调查、环境与健康问题分析、环境健康风险评价,建设环境与健康重点实验室,探索并实践环境与健康理念融入环境保护管理的研究任务,为全面开展环境与健康监测业务化运行以及环境健康风险评估进行技术实践和储备,为江苏省环境与健康管理工作提供支撑。     

Using Spatial Pattern to Quantify Relationship Between Samples, Surroundings, and Populations

The need for accurate carbon budgeting, climate change modelling, and sustainable resource management has lead to an increase in the number of large area forest monitoring programs. Large area forest monitoring programs often utilize field and remotely sensed data sources. Sampling, via field or photo plots, enables the collection of data with the desired level of categorical detail in a timely and efficient manner. When sampling, the aim is to collect representative detailed data enabling the statistical reporting upon the characteristics of larger areas. As a consequence, approaches for investigating how well sample data represent larger areas (i.e., the sample neighbourhood and the population) are desired. Presented in this communication is a quantitative approach for assessing the nature of sampled areas in relation to surrounding areas and the overall population of interest. Classified Landsat data is converted to forest/non-forest categories to provide a consistent and uniform data set over a 130,000 km² study region in central British Columbia, Canada. From this larger study area 322 2 × 2 km photo plots on a 20 × 20 km systematic grid are populated with composition and configuration information for comparison to non-sampled areas. Results indicate that typically, within the study area, the spatial pattern of forest within a photo plot is representative of the forest patterns found within primary and secondary neighbourhoods and over the entire population of the study. These methods have implications for understanding the nature of data used in monitoring programs worldwide. The ability to audit photo and field plot information promotes an increased understanding of the results developed from sampling and provides tools identifying locations of possible bias.     

The Distribution and Sources of Polycyclic Aromatic Hydrocarbons in Surface Sediments Along the Egyptian Mediterranean Coast

Coastal marine sediment samples were collected from 31 sampling stations along the Egyptian Mediterranean Sea coast. All sediment samples were analyzed to determine aliphatic and polycyclic aromatic hydrocarbons (PAHs) as well as total organic carbon (TOC) contents and grain size analysis. Total concentrations of 16 EPA-PAHs in the sediments were varied from 88 to 6338 ng g⁻¹ with an average value of 154 ng g⁻¹ (dry weight). However, the concentrations of total aliphatic were varied from 1.3 to 69.9 ng g⁻¹ with an average value of 15.6 ng g⁻¹ (dry weight). The highest contents of PAHs were found in the Eastern harbor (6338 ng g⁻¹), Manzala (5206 ng g⁻¹) and El-Jamil East (4895 ng g⁻¹) locations. Good correlations observed between a certain numbers of PAH concentrations allowed to identify its origin. The average total organic carbon (TOC) percent was varied from 0.91 to 4.54%. Higher concentration of total pyrolytic hydrocarbons (∑COMB) than total fossil hydrocarbons (∑PHE) declared that atmospheric fall-out is the significant source of PAHs to marine sediments of the Egyptian Mediterranean coast. The selected marked compounds, a principal component analysis (PCA) and special PAHs compound ratios (phenanthrene/anthracene vs fluoranthene/pyrene; ∑COMB/∑EPA-PAHs) suggest the pyrogenic origins, especially traffic exhausts, are the dominant sources of PAHs in most locations. Interferences of rather petrogenic and pyrolytic PAH contaminations were noticed in the harbors due to petroleum products deliveries and fuel combustion emissions from the ships staying alongside the quays.     

电磁辐射测量仪对测量结果的影响分析

目前国内外对环境电磁波的测量仪器主要分为两类,分别是选频式和非选频式。选频式仪器由各类测量接收机或频谱分析仪和接收天线组成,其不适于非周期信号测量。非选频式仪器由各类全向型探头和主机组成,适用于周期和非周期信号的环境电磁波测量,但这类仪器动态范围不高。本文采用了两种不同的测量仪器,分别以单频连续波和调制脉冲为激励信号进行比较分析。结果表明：随着测量信号电平增加,两种仪器测量结果数据趋于一致。而在用两种标准的不同方法计算某一频段的复合场强时,其数值有较大差异。     

沙漠油田开发生态环境保护的实践

文章阐述了地处沙漠腹地的石西油田在开发建设过程中开展环境保护工作的具体做法,从加强组织领导、制定并不断完善环保规章制度、加大科技投入等方面分析总结了在沙漠油田中开展环境保护的管理经验,通过加强井场作业、油气集输、建设用地管理、植物种植管理方面的措施,阐述了在沙漠油田开发建设中创建绿色油气田活动所取得的成绩。     

“十一五”期间辽河铁岭段及支流水质变化趋势

用Daniel的Spearman秩相关系数法对辽河铁岭段及支流在"十一五"期间水质进行趋势检验,确定各监测断面超标污染物及综合污染指数上升或下降趋势的显著性,结合铁岭市"十一五"期间的污染治理措施,分析各项污染物产生变化的原因,提出了今后的工作方向,为进一步加强环境管理提供了依据。     

四川省农村环境空气污染源分布及其对自动监测点位设置影响的研究

将四川省农村地区分成平原和浅丘区、小起伏山地和高丘区、高山峡谷区三种类型区域。利用GIS软件,将四川省划分网格,分别统计每个网格中的工业废气污染点源数量和主要交通线路长度,得出四川省工业废气污染点源密度分级图和四川省主要公路密度分布图,以及结合农村污染面源的情况分析,总结出农村区域的主要污染密度分布类型。结果表明,在一定区域范围内,农村平原和浅丘区的工业源、交通源、农村面源分布均匀;高丘区、小起伏山区、高山峡谷区的污染源分布均具有明显的地理分布特性,山间平地和山谷台地的污染源分布密度高;根据四川省污染源分布规律给农村空气自动监测布点提供了指导。     

岷江上游流域水电梯级开发的生态环境需水研究

本文通过分析岷江上游水电梯级开发对生态环境的主要影响,确定维持流域生态平衡的最小生态环境需水量测算方法。经测算,岷江上游的生态环境需水量占流域多年平均流量的6%～33%,越靠近源头,生态环境需水量所占比例越大。建议提高岷江上游生态环境需水量所占比例,将生态环境需水占比超过20%的茂县以上河段设为禁止开发区域,取消禁止开发区域内原规划的6级电站。同时在已建电站坝下和各县域出境断面设置生态流量监控断面,确保流域开发的环境生态平衡。     

双流县金马河饮用水源地水质自动监测系统介绍

为了及时、准确地掌握金马河水质状况,预警重大或流域性水质污染事件,确保饮用水水源地安全,双流县于2008年建立了县级饮用水源水质自动监测系统。本文详细介绍了水质自动监测系统的组成和特点,为其他水质自动系统的构建提供了有益的参考。     

生物技术在环境监测中的应用

文章介绍了实验室常用的生物监测方法,从生物学角度来判断环境污染的程度,为环境质量的监测和评价提供依据。着重对细菌学监测、隐孢子虫和贾第鞭毛虫的监测、浮游动植物监测、生物综合毒性监测等进行了专门论述。