KALMAN FILTER CALCULATION OF SAMPLING FREQUENCY WHEN DETERMINING ANNUAL MEAN SOLUTE CONCENTRATIONS

ABSTRACT: A linear filter (Kalman filter) technique was used with a Streamflow-concentration model the minimize surface water quality sampling frequencies when determining annual mean solute concentrations with a predetermined allowable error. The Kalman filter technique used the stream discharge interval as a replacement for the more commonly used time interval. Using filter computations, the measurement error variance was minimized within the sample size constraints. The Kalman filter application proposed here is applicable only under several conditions including: monitoring is solely to estimate annual mean concentration; discharge measurement errors are negligible; the Streamflow-concentration model is valid; and monthly samples reflect the total variance of the solute in question.     

降低布袋除尘器阻力与节能问题的探讨

根据多年来多事布袋除尘器的管理工作和现场调试经验，提出了除尘系统节能运行的思想和方法。并对布袋除尘系统的节能运行进行了认真的分析，特别是对降低除尘器阻力后如何进行节能调节问题进行了深入的探讨。     

USE OF X-RAY FLUORESCENCE TO DETERMINE TRACE METALS IN WATER RESOURCES1

ABSTRACT. The X-ray fluorescence method was used to analyze trace metals collected in particulate form on filter papers and from the ionic state by ion exchange filter papers. The samples were prepared by allowing water to pass through these filter papers. The procedures necessary for using the X-ray fluorescence method are described. A number of samples were taken from the Great Miami River in Dayton, Ohio over one year showing the presence of the following metals, Ca, Ti, Cr, Fe, Cu, Zn, Sr, and Cd. Elements in the periodic table between Ti and Cs were detectable to a sensitivity limit of the order of 30 ppb for metals in the particulate form and 0.4 ppm for metals in the ionic form.     

表面过滤技术在焚烧厂烟气脱酸净化中的作用

随着城市垃圾焚烧工程的发展，国家对焚烧后尾气的处理技术提出了越来越高的要求。基于“表面过滤”理论的Gore过滤技术，不但为粉尘排放达到欧洲标准提供了技术保障，而且为脱酸／硫的后续反应提供了反应界面，在实际应用中可以有效节约反应剂。     

应用于高温干态过滤的三聚氰胺纤维过滤材料

ＬＦＢ是Ｂａｓｏｆｉｌ纤维与Ｍｅｔｍａｘ纤维混合制成的针刺毡，本文主要介绍Ｂａｓｏｆｉｌ纤维和ＬＦＢ的物理和化学特性。     

贵广I回工程HOM3系统软件缺陷改进方法

通过分析贵广I回工程HOM3光测量系统在极控和直流滤波器保护系统中的软件,找到了软件在处理激光管告警信号和通讯故障信息的差异和缺陷,并提出了修改方法。修改方法经过实时数字仿真系统(RTDS)仿真验证,能够区分激光管告警和通讯故障两种不同的顺序事件记录(SER)信息,并准确定位发生通讯故障的通道,对提高工程安全稳定运行具有重要意义。     

炭化温度对废旧布袋制备活性炭性能的影响及其表征

以水泥厂废旧除尘布袋为原料,KOH为活化剂制备了活性炭.利用热重分析法(TG-DTG)对废旧布袋热解过程进行分析;重点考察了不同炭化温度(400、450、500、550和600℃)对废旧布袋制备活性炭的产率及活性炭的碘吸附值和亚甲基蓝吸附值的影响;同时采用N2吸附等温线对最佳工艺条件制备的活性炭孔隙结构进行了表征.研究结果表明,500℃为最佳炭化温度.最佳炭化温度下制备的活性炭,碘吸附值、亚甲基蓝吸附值和产率分别为1350.72 mg·g-1、97.5 mg·g-1和20.16%.活性炭比表面积高达1228.51 m2·g-1,总孔容达0.7134 cm3·g-1,孔径分布以微孔居多,N2吸附等温线为I型.     

土壤滤池+等离子除臭技术在污水处理厂的应用

随着区域规划的调整,苏州某污水处理厂周围环境变得较为敏感,原有除臭设施已无法满足新的环保要求,该污水处理厂的除臭工程需要进行升级改造.经综合比选后确定采用在现有除臭设施基础上增设土壤滤池+等离子除臭设施的方案.除臭工程实施后,主要臭气源得到有效控制,氨、硫化氢和二硫化碳等恶臭物质去除率均在85％以上,甚至达到99％,除臭设施处理效果良好,厂界处污染物排放满足GB 14554-93《恶臭污染物排放标准》一级标准要求.     

纤维素降解真菌的分离鉴定及特性研究

经过实验分离到一株纤维素降解真菌CD-Q1,通过形态及分子生物学鉴定该真菌为匍匐根霉。该菌能够以滤纸、秸秆和脱酯棉为唯一碳源生长,8 d内可将26.5%的秸秆降解,可将7.5%的滤纸糖化。当以滤纸为唯一碳源时,pH=5条件下,滤纸失重及还原糖产生量最高,45 h内可将3%滤纸降解,生成0.845 mg/ml的还原糖(以葡萄糖计)。该纤维素降解真菌的分离为纤维素糖化及进一步利用提供了较好菌源,为纤维素降解性能的基因改良提供了理想的出发菌株。