适用于废水处理的DSA电极的研究进展

电化学氧化技术因其具有氧化能力强、可控性高、运行费用低及对环境友好的特点,引起了人们极大的关注。处于核心地位的DSA（Dimensionally Stable Anodes）电极是电化学工作者研究的重点。Ti基氧化铅、氧化铱、锡锑氧化物等电极是目前最有研究价值的DSA电极,文章介绍了这些电极的一些最新的研究成果。     

热阻力概念的修正及计算方法

以隧道火灾为背景,对一维加热管流中的热阻力进行了研究。通过压力场数值模拟与理论分析,直接证实了热阻力的存在,并表明传统概念上的热阻力明显大于实际的能量损失。根据能量方程提出水平无粘管流的热阻力应等于气流经过加热区的全压力降,而非静压力降;等截面管流的热阻力大小应为传统热阻力值的1/2。这一修正使热阻力概念具有了严格的流体力学意义。在定义新的热阻力系数基础上,建立了2个热阻力系数表达式及低马赫数条件下热阻力的近似表达式。将该近似表达式与热损失方程进行对比,表明两者在低马赫数条件下具有一致性。研究成果进一步发展了热阻力理论体系,对隧道火灾及其它相关工程热物理问题的研究与应用都具有重要价值。     

自供电方式的输气站发电机房火险管理

结合涩宁兰输气管道涩北首站实际情况,就发电机房发生火灾事故后的应急反应程序进行了详细论证,提出了具体的火灾防范措施和改进需求,对基于自供电输气场站的发电机房火灾事故应急工作提供了参考.     

浅谈脱硫系统的防火设计

火灾报警及消防系统是人身、设备安全的重要保证.针对脱硫系统的具体实际,对火灾报警及消防系统设计进行了探讨,并给出一定的设计参考意见.     

饮食业油烟道火灾的模糊事件树分析

对饮食业油烟道火灾事故进行事件树分析时,历史数据的缺乏常常导致无法进行事件序列的定量计算.针对这一问题,利用专家对事故的模糊评判,引入模糊事件树进行定量计算研究.在模糊集理论的基础上,结合德尔菲法和判断矩阵法, 将模糊性语言转换为三角模糊数或梯形模糊数,应用模糊数截集以及模糊数清晰化方法,对后果事件发生概率进行计算.研究表明,饮食业油烟道火灾事故概率的模糊事件树分析是切实可行的,有助对饮食业油烟道火灾的认识、预防和扑救工作.     

Environmental assessment of garden waste management in the Municipality of Aarhus, Denmark

An environmental assessment of six scenarios for handling of garden waste in the Municipality of Aarhus (Denmark) was performed from a life cycle perspective by means of the LCA-model EASEWASTE. In the first (baseline) scenario, the current garden waste management system based on windrow composting was assessed, while in the other five scenarios alternative solutions including incineration and home composting of fractions of the garden waste were evaluated. The environmental profile (normalised to Person Equivalent, PE) of the current garden waste management in Aarhus is in the order of −6 to 8 mPE Mg⁻¹ ww for the non-toxic categories and up to 100 mPE Mg⁻¹ ww for the toxic categories. The potential impacts on non-toxic categories are much smaller than what is found for other fractions of municipal solid waste. Incineration (up to 35% of the garden waste) and home composting (up to 18% of the garden waste) seem from an environmental point of view suitable for diverting waste away from the composting facility in order to increase its capacity. In particular the incineration of woody parts of the garden waste improved the environmental profile of the garden waste management significantly.     

不同场地条件下水下隧道周围土体位移变化的数值分析

以拟建的哈尔滨松花江隧道为背景,考虑土体—衬砌的材料非线性特性和相互作用,按平面应变假定,建立在不同场地条件下的若干接近实际的有限元计算模型,应用有限元计算软件ANSYS进行数值分析,得出不同场地条件下隧道周围土体位移的分布规律,遴选出了影响水下隧道周围土体变形的部分关键因素,为合理确定隧道覆土层安全厚度提供了一定的理论依据。     

电极材料对电解法处理循环式准好氧垃圾填埋场渗滤液效果的影响研究

分别用3种不同材料电极（不锈钢、Ti／Pt和Ti／RuO2-IrO2）作阳极、石墨电极作阴极在同一条件下分别对循环式准好氧填埋垃圾场渗滤液进行电解处理对比研究。研究结果表明，随着电解时间的变化，渗滤液中的COD、BOD5、BOD5／COD、重金属离子浓度、色度和pH值均会发生改变。当电解时间为10—20min时，用上述3种电极作阳极电解均会出现渗滤液COD、BOD5、BOD5／COD增大的现象；当电解时间为30—40min时，用Ti／RuO2-IrO2或Ti／Pt电极作阳极电解均可使渗滤液的色度降为0；当电解时间为120min时，分别用3种电极作阳极电解都可使渗滤液中的COD、BOD5和重金属得到有效的去除，其中用Ti／RuO2-IrO2电极作阳极电解对COD、BOD5的去除效果最好：用Ti／Pt电极作阳极电解对Pb^2＋的去除效果最好。     

纵向通风下坡度隧道火灾烟气特性数值模拟研究

为探讨纵向通风情况下坡度隧道火灾烟气的温度分布、回流长度等特性参数,运用火灾动力学模拟软件FDS建立一个长为500 m的公路隧道模型,对不同坡度、不同纵向通风速率的20组火灾工况进行模拟研究,通过分析各工况的模拟结果,并结合前人在隧道火灾烟气特性研究方面的成果,得到火灾情况下隧道内烟气的纵向温度分布规律、隧道拱顶温度变化规律、温度偏移及烟气回流长度变化规律等。     

The effect of barriers on reducing thermal heat fluxes from a hydrocarbon pool fire

The radiant heat flux from a pool fire is frequently calculated using the solid flame model, where the flame envelope is approximated as a stationary cylinder whose surface emits thermal radiation at a constant rate. Radiant heat flux calculations using the solid flame model assume the target to be at a given elevation, typically at ground level, and to have an unobstructed view of the fire. The presence of obstacles (e.g., walls, buildings, etc.) or terrain features that would create shaded areas and provide shielding of a target from the fire is typically neglected in these calculations: this is a conservative approach, but it is not accurate. This paper presents a methodology to utilize the solid flame model to calculate the heat flux to a target while taking into account the presence of an obstruction between the target and the fire. The shielded solid flame method can quantitatively account for the presence of obstacles as a passive mitigation measure and allows project developers or designers to optimize their facility layout to meet safety requirements. The methodology presented in this paper uses the same correlations found in currently used solid flame models (e.g., LNGFIRE3), therefore, it remains consistent with current regulatory requirements for LNG facilities in the U.S.