响应面法优化超声吹脱处理香兰素生产废水中的氨氮工艺研究

为了提高废水中氨氮处理效率,采用响应面分析法对超声吹脱处理香兰素生产废水中的氨氮工艺条件进行优化,建立了吹脱时间、pH值、超声波功率及气液比4个关键因素与氨氮去除率之间的回归模型。结果表明,各影响因素对氨氮去除率影响程度由大到小依次为超声波功率、气液比、pH值、吹脱时间。确定对氨氮去除的最佳工艺条件为在超声功率90 W,超声吹脱时间90 min,pH值12、气液比600∶1的条件下,氨氮的去除率达到91.60%,与预测值接近,表明拟合度好。试验模型可以用来指导超声吹脱法处理废水中的氨氮。     

基于正交试验的谷物粉尘燃烧特性影响因素研究

为了研究谷物粉尘燃烧特性影响因素，以可食用玉米淀粉为研究对象，通过ZY6243锥形量热仪（CONE）进行了单因素和正交试验，研究了粉尘粒径、惰性介质CaCO3质量分数、热辐射通量对玉米淀粉燃烧特性的影响效应。应用直观分析法和方差分析法定性地研究了各因素对玉米淀粉热释放速率峰值的影响程度并进行了排序，2种方法得出的结论基本一致。研究结果表明:各因素对玉米淀粉热释放速率峰值的影响程度依次为:CaCO3质量分数＞粉尘粒径＞热辐射通量；其中惰性介质CaCO3对热释放速率峰值和引燃时间的影响最为显著。     

水力负荷及固相碳源对BAF+多级土壤渗滤组合工艺处理污水的影响研究

碳源的选择及曝气量的控制是影响多级土壤渗滤系统(multi-soil-laying,即MSL)脱氮效果的重要因素.试验采用BAF+MSL两段式新型组合工艺,避免了传统MSL曝气过量抑制反硝化脱氮的风险.考察了不同水力负荷下,BAF+MSL对生活污水的净化效果,并比较研究了以聚丁二酸丁二醇酯(PBS)为反硝化碳源的MSL-1及木屑为碳源的MSL-2的脱氮除磷效果.结果表明,不同水力负荷下,系统对SS平均去除率为94.08%,对COD的去除率均在80%以上,出水COD在20mg·L-1以下.水力负荷对系统BAF段硝化性能影响较小,对MSL反硝化脱氮影响较大.BAF水力负荷为0.5、1及2m·3m-·2d-1时,BAF对NH4+-N的去除率均在90%以上,对TN的平均去除率依次为26.53%、11.09%、5.71%;对应MSL段水力负荷分别为0.25、0.50及1m·3m-·2d-1时,MSL-1对TN平均去除率分别为87.39%、65.09%、45.56%,MSL-2平均去除率依次为61.51%、42.52%、31.32%.MSL-1脱氮性能明显优于MSL-2,而两者除磷效果区别较小.随着水力负荷增大,MSL对TP去除率依次降低,MSL-1对TP平均去除率最高为91.97%.     

氮肥施用对紫色土-玉米根系系统N2O排放的影响

通过不同施氮水平与不同氮肥品种2个田间试验,结合静态箱-气相色谱法研究了川中丘陵区2005年5～9月石灰性紫色土-玉米根系系统的N2O排放变化.结果表明:1)施用氮肥显著地增加了N2O排放,在3个施氮水平下(0、150和250 kg·hm-2),N2O排放总量分别为0.88、2.19和2.52 kg·hm-2;施氮量越高,N2O排放量也越高.当施氮量超过一定水平后,施肥量高低对N2O排放总量的影响并不显著.由氮肥施用引起的N2O排放量占施氮量的0.87%(150 kg·hm-2)和0.66%(250 kg·hm-2).2)氮肥品种显著影响N2O排放,尿素(酰胺态氮肥)和硫酸铵(铵态氮肥)处理的N2O排放量分别为2.09和1.80 kg·hm-2,显著高于硝酸钾(硝态氮肥)处理(1.27 kg·hm-2),三者排放量分别占施氮量的0·80%、0.60%和0.27%.3)降雨是玉米生长季N2O排放的主要影响因子,而无机氮则是影响N2O排放的主要限制因子.     

加速溶剂萃取-气相色谱-质谱法测定土壤中苯胺的部分前处理问题

为了探究土壤中苯胺回收率测定偏低的难点,笔者针对《土壤和沉积物 苯胺类和联苯胺类的测定 液相色谱-三重四极杆质谱法(征求意见稿)》中前处理阶段的问题,在优化部分前处理条件的基础上,研究土壤吸附、内标加入的时机以及还原剂(五水合硫代硫酸钠)和氨水对苯胺回收率的影响。结果表明:土壤吸附是导致苯胺加标回收率偏低的重要因素,与空白加标相比,含有一定量有机质的砂质壤土基体加标回收率减少了42.05%~60.89%。内标在不同阶段加入会对苯胺回收率产生显著影响,主要是由前处理过程中的基体吸附和挥发损失导致。加入还原剂和氨水对空白加标的苯胺回收率无显著影响,但对于含有一定量有机质的砂质壤土,加入氨水后苯胺加标回收率增加了59.57%,具有显著影响。     

高效生物絮凝剂产生菌的诱变选育

为得到絮凝活性高的优良菌株,采用紫外线诱变和化学诱变相结合的方法对野生菌株XN-3进行人工育种,选育出性能优良、遗传稳定的变异菌株UH-2-4,其絮凝率达到96.8%,比原菌株提高了25.1%。并研究了金属离子、投加量对其絮凝活性的影响。     

Determining floodplain sedimentation rates using Cs in a low fallout environment dominated by channel- and cultivation-derived sediment inputs, central Queensland, Australia

Fallout ¹³⁷Cs has been widely used to determine floodplain sedimentation rates in temperate environments, particularly in the northern hemisphere. Its application in low fallout, tropical environments in the southern hemisphere has been limited. In this study we assess the utility of ¹³⁷Cs for determining rates of floodplain sedimentation in a dry-tropical catchment in central Queensland, Australia. Floodplain and reference site cores were analysed in two centimetre increments, depth profiles were produced and total ¹³⁷Cs inventories calculated from the detailed profile data. Information on the rates of ¹³⁷Cs migration through local soils was obtained from the reference site soil cores. This data was used in an advection–diffusion model to account of ¹³⁷Cs mobility in floodplain sediment cores. This allowed sedimentation rates to be determined without the first year of detection for ¹³⁷Cs being known and without having to assume that ¹³⁷Cs remains immobile following deposition. Caesium-137 depth profiles in this environment are demonstrated to be an effective way of determining floodplain sedimentation rates. The total ¹³⁷Cs inventory approach was found to be less successful, with only one of the three sites analysed being in unequivocal agreement with the depth profile results. The input of sediment from catchment sources that have little, or no, ¹³⁷Cs attached results in true depositional sites having total inventories that are not significantly different from those of undisturbed reference sites.     

STORM RUNOFF CHARACTERISTICS OF GRAZED WATERSHEDS IN EASTERN OREGON1

ABSTRACT: Rainfall and runoff data from 485 storms during the summers of 1979–84 were evaluated to characterize storm runoff volumes (SF) and peak flows (QP) for 13 small watersheds in the Blue Mountains of eastern Oregon and to determine differences among grazing intensities and vegetation types. Storm hydrographs were separated by using watershed-specific baseflow rise rates of 0.002–0.013 cfsm/hr. Median SF and QP were 0.0014 in and 0.43 cfsm, respectively, for all storms. Total storm rainfall (PPT) and initial flow (QI) were important stepwise regression variables in accounting for the variation in SF and peak flow above initial flow (QPI); 30- and 60-mm rainfall intensities and rainfall duration were relatively unimportant. Two classes of vegetation were evaluated: (1) western larch-Douglas-fir (nine watersheds), and (2) other (four watersheds representing fir-spruce, lodgepole pine, mountain meadow, and ponderosa pine). Mean SF and QP did not differ (P=0.05) among vegetation classes but significant differences were apparent in the relation of SF to PPT and QI, and QPI to PPT and QI. As PPT and QI increased, SF and QPI from larch-Douglas-fir watersheds increased at a slower rate than they did from the other watersheds. Four levels of grazing intensity had no effect on storm runoff.     

循环冷却水浓缩倍率对凝汽器管路的腐蚀和结垢趋势

利用水质判断指数来预测不同循环冷却水浓缩倍率下水的结垢趋势,确定形成最佳碳酸钙保护膜所对应的浓缩倍率,以达到最经济的防止循环冷却水系统腐蚀和结垢的目的.     

悬浮载体SBR工艺处理生活污水实验室研究

以生活污水为研究对象,研究将悬浮载体生物处理技术引入SBR工艺中的可行性,以及填充率对CODcr-NH3-N去除率的影响。试验结果表明,悬浮载体生物处理技术引入SBR工艺可以使去除效率提高10个百分点以上;同时发现在30％填充率时,CODcr、NH3-N的去除率分别可达87．0％、91．5％以上。其出水CODcr和NH3-N指标可达到生活杂用水水质指标。