单质硫改性介孔炭对水溶液中汞的吸附性能研究

对介孔炭CMK-3进行单质硫改性得到OMC-S,并通过静态吸附实验研究了该材料对水溶液中汞的吸附性能。研究结果表明：单质硫改性可以在介孔炭上负载12.33%的硫,从而使得介孔炭对汞的吸附容量从185 mg/g提高到476 mg/g;OMC-S具有较广的适用pH值范围,在pH 3～11.5范围内其对汞的吸附去除率均达到92%以上;氯离子对OMC-S的吸附性能具有一定的抑制作用,原因在于它能和汞离子络合形成一系列吸附性能较差的Hg-Cl络合物,而腐殖酸在所研究的范围内对OMC-S的吸附性能无明显影响。     

Determining floodplain sedimentation rates using Cs in a low fallout environment dominated by channel- and cultivation-derived sediment inputs, central Queensland, Australia

Fallout ¹³⁷Cs has been widely used to determine floodplain sedimentation rates in temperate environments, particularly in the northern hemisphere. Its application in low fallout, tropical environments in the southern hemisphere has been limited. In this study we assess the utility of ¹³⁷Cs for determining rates of floodplain sedimentation in a dry-tropical catchment in central Queensland, Australia. Floodplain and reference site cores were analysed in two centimetre increments, depth profiles were produced and total ¹³⁷Cs inventories calculated from the detailed profile data. Information on the rates of ¹³⁷Cs migration through local soils was obtained from the reference site soil cores. This data was used in an advection–diffusion model to account of ¹³⁷Cs mobility in floodplain sediment cores. This allowed sedimentation rates to be determined without the first year of detection for ¹³⁷Cs being known and without having to assume that ¹³⁷Cs remains immobile following deposition. Caesium-137 depth profiles in this environment are demonstrated to be an effective way of determining floodplain sedimentation rates. The total ¹³⁷Cs inventory approach was found to be less successful, with only one of the three sites analysed being in unequivocal agreement with the depth profile results. The input of sediment from catchment sources that have little, or no, ¹³⁷Cs attached results in true depositional sites having total inventories that are not significantly different from those of undisturbed reference sites.     

Elasticity Ratio of Resource Consumption and the Resource Consumption

Today the resources are becoming scarcer, which should not be regarded as unexhausted any more. Correspondingly, the production would be constrained by the scarcity of resources clearly. Then the economic researchers would pay much more attention to reducing the consumption of natural resources in the future. Therefore this paper brings foreword the conception of elasticity ratio of resource consumption based on the concept of elasticity and analyzes the relationship between the parameters. For the certain relationships between the elasticity ratio of resource consumption and resource consumption, this paper will try to reveal, to keep economy growing while resource consumption reducing, what conditions should be met as to the relationships among resource productivity, its growth rate, energy saving efficiency, economic growth rate and elasticity ratio of resource consumption. This paper proves the relationship between the China＇s energy consumption and economy growth using statistic data from 1978 to 2003.     

Industrial experience of process identification and set-point decision algorithm in a full-scale treatment plant

This paper presents industrial experience of process identification, monitoring, and control in a full-scale wastewater treatment plant. The objectives of this study were (1) to apply and compare different process-identification methods of proportional-integral-derivative (PID) autotuning for stable dissolved oxygen (DO) control, (2) to implement a process monitoring method that estimates the respiration rate simultaneously during the process-identification step, and (3) to propose a simple set-point decision algorithm for determining the appropriate set point of the DO controller for optimal operation of the aeration basin. The proposed method was evaluated in the industrial wastewater treatment facility of an iron- and steel-making plant. Among the process-identification methods, the control signal of the controller's set-point change was best for identifying low-frequency information and enhancing the robustness to low-frequency disturbances. Combined automatic control and set-point decision method reduced the total electricity consumption by 5% and the electricity cost by 15% compared to the fixed gain PID controller, when considering only the surface aerators. Moreover, as a result of improved control performance, the fluctuation of effluent quality decreased and overall effluent water quality was better.     

徐州市近年来大气硫酸盐化速率的时空变化研究

硫酸盐化速率反映大气中二氧化硫及硫的化合物的污染状况,文章以徐州市区11年大气中硫酸盐化速率监测数据为依据,分析研究了煤烟型城市环境空气中硫酸盐化速率的变化规律及污染状况。结果表明：徐州市硫酸盐化速率变化有明显的时空特征,与环境空气质量也密切相关。提出削减污染源,加快清洁能源推广步伐,完善城市规划,进行产业结构调整是解决徐州市大气污染的有效途径。     

硝酸异辛酯热安定性的实验研究

使用加速量热仪(ARC)研究硝酸异辛酯(EHN)的热分解,得到热分解温度随时间的变化曲线,自放热速率、分解压力随温度的变化曲线以及分解压力随升温速率的变化曲线。分析在绝热条件下硝酸异辛酯的热分解反应动力学和热分解过程,计算表观活化能、指前因子和反应热等参数。根据绝热热分解的起始温度和反应热数据,给出硝酸异辛酯在反应危险度等级中的分类,并计算在75℃时的反应风险指数。     

竹地板与普通实木地板燃烧性能的锥形量热仪对比实验研究

随着竹地板的广泛应用,竹木地板的火灾燃烧性能也将引起人们的关注.本文采用锥形量热仪对竹木地板的引燃时间、热释放速率、总热释放和一氧化碳的产率及体积比浓度等燃烧性能与普通实木地板进行了比较研究.研究结果表明:在相同条件下,竹木地板试样的引燃时间较短,临界引燃辐射热通量较低,引燃危险相对较大;竹木地板试样燃烧中第一个热释放速率峰值出现的时间短,且峰值相对较大,其潜在的轰燃危险相对较大;此外,竹木试样的一氧化碳的产率和燃烧初期在烟气中的体积比浓度相对较大.     

某铀矿山废石场及尾砂库氡污染调查

通过对某退役铀矿山的 14个废石堆放场及 3个尾砂库氡析出率的测量及内照射剂量的估算 ,表明 ,只有一个废石场的氡析出率超过国家规定的管理限值水平 ;尾砂库的氡析出率较高 ,个别测点的氡析出率超出管理限值水平近 7倍 ;因氡析出而使当地居民额外所受的年最大有效剂量当量为 0 0 5 8mSv。指出在尾砂库表面覆盖黄土 ,可以有效降低氡析出水平 ,当覆盖厚度达 0 5m时 ,可将氡析出水平降低 84%以上。     

Enhanced photocatalytic activity of TiO2 by surface fluorination in degradation of organic cationic compound

Experiments were carried out to investigate the influence of TiO2 surface fluorination on the photodegradation of a representative organic cationic compound, Methylene Blue （MB）. The eleetropositive MB shows poor adsorption on TiO2 surface; its degradation performs a HO. radical-mediated mechanism. In the F-modified system, the kinetic reaction rate enlarged more than 2.5 fold that was attributed mainly to the accumulating adsorption of MB and the increased photogenerated hole available on the F-modified TiO2 surface.     

Sludge reduction with Tubificidae and the impact on the performance of the wastewater treatment process

To reduce excess sludge, a Tubificidae reactor was combined with an integrated oxidation ditch with vertical circle (IODVC), and a new integrated system was developed for wastewater treatment. A pilot-scale of this integrated system was tested to investigate the sludge reduction with Tubificidae and the impact on effluent quality and sludge production. The dominant worm was Branchnria Sowerbyi in the Tubificidae reactor after inoculation of Branchnria Sowerbyi and Limnodrilns sp., and the maximal volume density of wet Tubificidae in vessels of the Tubificidae reactor was 17600 g/m3. Two operational modes, treating the excess sludge (first mode) and the returned sludge (second mode) of IODVC by the Tubificidae reactor, were used in this experiment. The results showed that the excess sludge reduction rate was 46.4% in the first mode, and the average sludge yield of the integrated system was 6.19×10-5 kg SS/kg COD in the second mode. Though the sludge returned to IODVC via the Tubificidae reactor, it had little impact on the effluent quality and the sludge characteristics of the IODVC. No new type of recalcitrant substance in the supernatant was discharged into the environment when the sludge was treated by Tubificidae. The experimental results also indicated that no significant changes occurred on the viscosity, specific resistance, and the floc size distribution of the sludge.