箱式内浮盘失效原因分析与改进研究

针对一起使用箱式浮盘技术的内浮顶储罐闪爆事故,分析了箱式浮盘的失效原因。对比分析了箱式浮盘的国内外标准技术要求,调研了国内箱式浮盘的使用现状和使用过程中的失效情况。针对此次事故当中暴露出的问题,结合当前我国箱式浮盘的技术现状,提出了提高箱式浮盘技术水平的改进意见和建议。     

无刺构骨秋季光合特性的初步研究

采用Li-6400光合测定系统对无刺构骨的秋季光合特性进行了初步研究.结果表明,无剌构骨净光合速率（Pn）日变化规律为双峰曲线形式,有“午睡”现象,最高峰值于11：00左右出现,次高峰出现在14：00,日最大净光合速率为8.33μmol/m2·s,净光合速率（Pn）与气孔导度（Cond）、蒸腾速率（Tr）呈正相关,与胞间CO2浓度（Ci）呈负相关.无刺枸骨光补偿点为12.146μmol/m2·s,光饱和点为1499μmoL/m2·s.     

天津盘山风景名胜区总体规划环境影响识别探讨

本文以天津盘山风景名胜区总体规划环境影响识别为例,分析规划本身对区域产业、社会、环保产生的直接影响,进而识别规划对资源环境要素产生的间接影响,并确定评价重点。     

基于相关系数优化法的河流突发污染源项识别

基于相关系数优化法,结合地表水环境特征和污染物水质过程特征,推导出一维河道中单点源瞬时排放的源项反演算法,得到了污染源排放特征与河流环境特征参数的反演公式.采用假想算例进行数值试验,综合分析了流速信息、污染物衰减、监测距离、监测数据误差及中间参数?T选取等因素对反演结果的影响,确定了该方法的适用条件和最优条件的寻找方式.间隔10min进行两次监测采样,若监测误差小于5%,反演结果的相关系数达到-0.97,污染源位置和排放量反演结果的相对误差均小于4%,综合相对误差在2%以内.并且方法具有监测布点简单高效,数据需求低,编程简单等优点,值得在环境应急管理中进行实际应用.     

Nonlinear molecular based modeling of the flash point for application in inherently safer design

New chemical process design strategies utilizing computer-aided molecular design (CAMD) can provide significant improvements in process safety by designing chemicals with required target properties and the substitution of safer chemicals. An important aspect of this methodology concerns the prediction of properties given the molecular structure. This study utilizes one such emerging method for prediction of a hazardous property, flash point (FP), which is in the center of attention in safety studies. Using such a reliable data set comprising 1651 organic and inorganic chemicals, from 79 diverse material classes, and robust dynamic binary particle swarm optimization for the feature selection step resulted in the most efficient molecular features of the FP investigations. Apart from the simple yet precise five-parameter multivariate model, the FP nonlinear behavior was thoroughly investigated by a novel hybrid of particle swarm optimization and support vector regression. Besides, 195 missing experimental FPs of the DIPPR data set are predicted via the presented procedure.     

挤塑型聚苯乙烯泡沫塑料着火温度实验研究

研究了挤塑型聚苯乙烯(XPS)保温材料两种不同着火方式下的着火温度。采用南京江宁仪器分析厂生产的DW-02型点着温度测定仪对XPS的着火温度进行了测定。利用辐射引燃仪得到了2.2 cm厚挤塑型保温板在不同加热功率下的着火温度。结果表明:DW-02型点着温度测定仪测得的挤塑型聚苯乙烯保温材料的点燃温度约为355℃;热辐射引燃仪测得的2.2 cm厚保温板在不同加热功率下的着火温度是365-370℃,且引燃时间随着辐射引燃仪加热功率的增大而逐渐缩短;明火火源比热流辐射容易引燃挤塑型聚苯乙烯保温板。研究结论对FDS模拟挤塑型聚苯乙烯燃烧特性时,材料热解参数的设定有指引作用,对实际工程中遴选合适的外墙保温材料具有重要的参考价值。     

双管板换热器的设计与制造

根据双管板换热器的结构特点,从设计、制造、监造与使用维护方面全过程要点剖析,对主要重点进行系统性进行阐述,并与业内人士全方位交流与要点探讨。     

Modelling three-phase releases of carbon dioxide from high-pressure pipelines

This paper describes the development and experimental validation of a three-phase flow model for predicting the transient outflow following the failure of pressurised CO₂ pipelines and vessels. The choked flow parameters at the rupture plane, spanning the dense-phase and saturated conditions to below the triple point, are modelled by maximisation of the mass flowrate with respect to pressure and solids mass fraction at the triple point. The pertinent solid/vapour/liquid phase equilibrium data are predicted using an extended Peng–Robinson equation of state.The proposed outflow model is successfully validated against experimental data obtained from high-pressure CO₂ releases performed as part of the FP7 CO2PipeHaz project (www.co2pipehaz.eu).The formation of solid phase CO₂ at the triple point is marked by a stabilisation in pressure as confirmed by both theory and experimental observation. For a fixed diameter hypothetical pipeline at 100 bar and 20 °C, the flow model is used to determine the impact of the pipeline length on the time taken to commence solid CO₂ discharge following its rupture.     

Kinetics and mechanisms of reactions for hydrated electron with chlorinated benzenes in aqueous solution

The reactions between chlorinated benzenes (CBzs) and hydrated electron (eaq-) were investigated by the electron beam (EB) and laser flash photolysis (LFP) experiments. Under the EB irradiation, the effects of irradiation dose, initial concentration and the number of Cl atoms on the removal efficiencies were further examined. At 10 kGy, the removal efficiencies of mono-CB, 1,3-diCB, 1,2-diCB and 1,4-diCB were 41.2%, 87.2%, 84.0%, and 84.1%, respectively. While irradiation dose was 50 kGy, the removal efficiencies increased to 47.4%, 95.8%, 95.0%, and 95.2%, respectively. Irradiation of CBzs solutions has shown that the higher the initial concentration, the lower the percentage of CBzs removal. In addition to this, the dechlorination efficiencies of 1,2-dichlorobenzene (1,2-diCB), 1,3-dichlorobenzene (1,3-diCB) and 1,4-dichlorobenzene (1,4-diCB) were much higher than that of chlorobenzene (mono-CB). The kinetics of the reactions was achieved with nanosecond LFP. The rate constants of second-order reaction between eaq- with mono-CB, 1,2-diCB, 1,3-diCB and 1,4-diCB were (5.3±0.4) × 10⁸, (4.76±0.1) × 10⁹, (1.01±0.1) × 10¹⁰ and (3.29±0.2) × 10⁹ L·mol^-1·s^-1, respectively. Density functional theory (DFT) calculations were performed to determine the optical properties of unstable CBzs anion radicals, and the main absorption peaks lied in the range of 300–550 nm. The primary reaction pathway of CBzs with eaq- was gradual dechlorination, and the major products were Cl^- and benzene (CBzs(-Cl^-)). Furthermore, biphenyl (or chlorobiphenyl) was observed during the LFP, which was probably formed by recombination of benzene radicals.     

基于三维结构分析的碳排放总量控制研究——以浙江省为例

控制碳排放总量是能源环境治理的重要手段,是高质量发展的应有之义,更是我国完成2030年前碳达峰、争取2060年前实现碳中和的必然要求,但目前国家和地方并未明确实行碳排放总量控制。本研究以浙江为例,从能源生产侧、能源消费侧、区域三个维度,分析识别出浙江省碳排放总量控制的重点和难点:能源生产侧减排的重点在于提高非化石电力占比,难点在于推进存量火电机组的碳减排;能源消费侧减排的重点在于控制新上重大产业项目排放,难点在于控制第三产业和居民生活领域碳排放;区域减排的重点在于优化产业布局和用能结构,难点在于对地区碳排放总量缺乏有效约束。并提出电力结构低碳化、重点行业控碳、试点城市率先达峰和政策协同四方面突破点,争取到"十四五"末浙江省碳排放总量得到有效控制,为全国碳排放达峰做出浙江贡献。