固体燃料烟点测量装置的研制

本文介绍了最近研制的一种用于固体燃料烟点测量的装置及配合烟点准确测定而开发的烟粒监测系统,并就PMMA材料进行了测试。本项研究为固体燃料的火焰高度及烟点的测量,首次提供了合理、可行的技术方法。     

Generic scenario for the impact of cooling lubricants into the hydrosphere

According to directive 93/67/EEC of the European Commission, this paper deals with the generic exposition evaluation of the environmental concentration of cooling Lubricant chemicals from the metal working industry into the hydrosphere. After considering the relevant life-cycle steps and the selection of a representative point source for the 'reasonable worst case', the emission per day Elocal(water) is determined. It leads to the predicted environmental concentration (PEClocal(water)) for the local stage in the compartment water. In order to gain the PEClocal(water) for an example--a corrosion inhibitor as additive in a cooling lubricant--, the relevant emission paths and the corresponding representative point source are described for the reasonable worst case. For non-water-miscible cooling lubricants, none of the operations in the life cycle leads to a release into the compartment water. To evaluate the hazard potential for cooling lubricant chemicals, the complete risk assessment has to be done. Also, the assessment has to be done for all high production volume chemicals, new substances and existing hazard chemicals. This means that even industrial categories like chemicals used in the textile industry or biocides and others have to be evaluated.     

AN EMPIRICAL MODEL OF FATALITIES AND INJURIES DUE TO FLOODS IN JAPAN1

ABSTRACT: This paper provides a framework for analyzing flood fatalities and injuries, and it describes the derivation of a generalized flood risk (i.e., flood consequences and their probabilities) function by introducing an integrated index (the number of residential buildings affected by a flood) that represents the major change in the power relation among the flood intensity, regional vulnerability, and resilience. Both the probabilities and the numbers of fatalities and injuries clearly increase significantly after the flood severity (in terms of the number of inundated buildings) passes a branch point. Below the branch point, it is still possible for fatalities and injuries to occur because of the variability in the data and the uncertainty in the predicted fatality values. The empirical models of fatalities and injuries due to floods in Japan suggested the usefulness in predicting fatalities and injuries and evaluating the efficacy of the warning or other emergency response measures.     

OPTIMIZATION PROCEDURE FOR COST EFFECTIVE BMP PLACEMENT AT A WATERSHED SCALE1

ABSTRACT: A combinatorial optimization procedure for best management practice (BMP) placement at the watershed level facilitates selection of cost effective BMP scenarios to control non point source (NFS) pollution. A genetic algorithm (GA) was selected from among several optimization heuristics. The GA combines an optimization component written in the C++ language with spatially variable NFS pollution prediction and economic analysis components written within the Arc View geographic information system. The procedure is modular in design, allowing for component modifications while maintaining the basic conceptual framework. An objective function was developed to lexicographically optimize pollution reduction followed by cost increase. Scenario cost effectiveness is then calculated for scenario comparisons. The NPS pollutant fitness score allows for evaluation of multiple pollutants, based on prioritization of each pollutant. The economic component considers farm level public and private costs, cost distribution, and land area requirements. Development of a sediment transport function, used with the Universal Soil Loss Equation, allows the optimization procedure to run within a reasonable timeframe. The procedure identifies multiple near optimal solutions, providing an indication of which fields have a more critical impact on overall cost effectiveness and flexibility in the final solution selected for implementation. The procedure was demonstrated for a 1,014‐ha watershed in the Ridge and Valley physiographic region of Virginia.     

太湖地区湖、河和井水中氮污染状况的研究

连续监测了 2 0 0 0年 9月至 2 0 0 1年 9月太湖、大运河和井水中的N污染状况。结果表明 ,太湖水体中无机氮年均浓度达 1.14mg·L-1,已超过水体富营养化的浓度下限 ;大运河和井水分别达 7.16mg·L-1和 15 .84mg·L-1;井水中NO-3 -N浓度高达 15 .4 7mg·L-1,超过WHO所规定的生活饮用水NO-3 -N浓度上限的 5 0 %。试验结果还表明 ,河水中氮污染源以NH 4 -N为主 ,浓度高达 5 .6 3mg·L-1,占无机氮(NO-2 -N含量很低 ,忽略不计 )的 79% ;而井水中无机氮以NO-3 -N为主 ,占 98%。湖、河及井水中不同深度水样的分析结果表明 ,NO-3 -N和NH 4 -N浓度差异不显著 ,但其随时间变化差异明显。     

酸阻滞技术的研究与应用

本文提出酸阻滞法从废液中分离，回收重金属和酸的新技术工艺，从十多种国产树脂中成功地筛选出两种可作为酸阻滞剂，有较好的分离效果。但洗脱时酸脱尾严重，当选择穿透比在０．６左右时，可以解决酸脱尾现象，使脱尾酸损失由３０％降到７％，而酸的回收率由６０％提高到９０％，采用该工艺对几种废液进行处理，重金属回收液中酸去除率大于９５％，而回用酸中金属去除率大于７０％，该工艺既可回收重金属，同时也可回收酸。     

H型钢冷却过程的数值分析

此文根据非稳定热传导基本方程式积分得到离散化方程式,编写出计算程序.利用计算机求出H型钢内各点随时间变化的温度,绘出等温线,以研究H型钢理想的冷却方法.     

烃类流体火灾伤害破坏作用定量分析

对烃类流体火灾的伤害破坏作用进行正确的定量分析是开展重大消防目标火灾风险评估工作的基础。针对烃类流体火灾伤害破坏作用定量分析中存在的问题,系统论述烃类流体火灾伤害破坏作用的定量分析方法,分析并讨论火球、池火、喷射火和蒸气云火灾等不同火灾形式的热辐射通量计算模型及其前提条件,对不同热辐射伤害破坏作用准则及伤害概率模型的适用条件和模型基础进行了论述。     

EFFECT OF A POINT SOURCE INPUT ON STREAM NUTRIENT RETENTION1

ABSTRACT: We examined the effect of a point source (PS) input on water chemistry and nutrient retention in Spavinaw Creek, Arkansas, during summer baseflows in 1998 and 1999. The nutrient uptake length (S_w) concept was used to quantify the impact of nutrient inputs in the receiving stream. We used an artificial injection upstream of the PS inputs to estimate background S and used the natural decline in nutrient concentrations below the PS to estimate the net nutrient uptake length (S_net). S_w for soluble reactive phosphorus (SRP) in the upstream reference section was O.75 km, but S_net ranged from 9.0 to 31 km for SRP and 3.1 to 12 km for NO₃‐N in the reach below the PS. S_net‐SRP was significantly correlated with discharge whereas S_net‐NO₃‐N was correlated with the amount of NO₃‐N enrichment from the PS. In order to examine specific mechanisms of P retention, loosely exchangeable P and P Sorption Index (PSI) of stream sediments were measured. Sediments exhibited little natural P buffering capacity (low PSI) above the PS, but P loading from the PS further reduced PSI. Loosely exchangeable P in the sediments also increased three fold below the PS, indicating sediments removed some water column P. The physical process of flow and sediment sorption apparently regulated P retention in Spavinaw Creek, whereas the level of N enrichment and possibly biotic uptake and denitrification influenced N retention. Regardless of the mechanism, Spavinaw Creek demonstrated little ability to retain PS‐added nutrients because net nutrient uptake lengths were in the km range.     

Mixing Zone Characterization of Two Transition Terrain Streams With Tracers1

Abstract: For most wastewater discharges to streams, the effluent creates a plume that becomes less distinct as it mixes with the receiving water. Constant‐discharge tracer studies were used to characterize the plume or physical mixing zone (PMZ) at two similar transition terrain streams. At both sites, the laterally unmixed PMZs did not extend across the entire stream and mixing occurred relatively quickly. The observed plumes were significantly smaller than the regulatory mixing zone (RMZ) allowed by the State of Colorado. At Site 1 mixing occurred within a much shorter distance due to the presence of a riffle zone located a few meters downstream of the discharge point. Interpretation of field data with an analytical model suggests that the effective transverse dispersion coefficient (k_z) for the riffle zone at Site 1 (～1 m²/s) was significantly higher than the average value over the longer nonriffle section at Site 2 (～0.01 m²/s). These results imply that to achieve the fastest mixing in transition terrain streams, thereby minimizing the size of the PMZ, discharge outfalls should be located upstream and close to riffle zones.