Desulfurization of dibenzothiophene（DBT） by a novel strain Lysinibacillus sphaericus DMT-7 isolated from diesel contaminated soil

A new bacterial strain DMT-7 capable of selectively desulfurizing dibenzothiophene (DBT) was isolated from diesel contaminated soil. The DMT-7 was characterized and identified as Lysinibacillus sphaericus DMT-7 (NCBI GenBank Accession No. GQ496620) using 16S rDNA gene sequence analysis. The desulfurized product of DBT, 2-hydroxybiphenyl (2HBP), was identified and confirmed by high performance liquid chromatography analysis and gas chromatography-mass spectroscopy analysis respectively. The desulfurization kinetics revealed that DMT-7 started desulfurization of DBT into 2HBP after the lag phase of 24 hr, exponentially increasing the accumulation of 2HBP up to 15 days leading to approximately 60% desulfurization of the DBT. However, further growth resulted into DBT degradation. The induced culture of DMT-7 showed shorter lag phase of 6 hr and early onset of stationary phase within 10 days for desulfurization as compared to that of non-induced culture clearly indicating the inducibility of the desulfurization pathway of DMT-7. In addition, Lysinibacillus sphaericus DMT-7 also possess the ability to utilize broad range of substrates as sole source of sulfur such as benzothiophene, 3,4-benzo DBT, 4,6-dimethyl DBT, and 4,6-dibutyl DBT. Therefore, Lysinibacillus sphaericus DMT-7 could serve as model system for efficient biodesulfurization of diesel and petrol.     

浅谈管道隔振

在建筑工程中管道系统作为介质输送的必备条件,虽然管道自身不会产生振动,但是管道在与相关振动设备连接时则变成了传递振动的"振桥",在隔振设计时经常被忽视。本文主要讲述了冷冻机房内水管路吊挂,落地安装及通风系统中风管吊装时的几种减振降噪做法,还包括了经常被大家忽视的管道穿墙隔振的做法,分别通过添加弹簧减振器、弹簧吊架、橡胶减振垫、橡胶挠性接管、金属软管、波纹管补偿器等减振器材,使得振源通过管道产生振动的传导大大降低,并且记述了一些减振设备在安装时应注意的事项。     

中国南方碳酸盐岩上覆红土形成机制研究进展

碳酸盐岩上覆红土在中国南方分布广泛,已提出的用于解释其形成机制的有溶蚀-残积说、溶蚀-交代说和外来沉积说,溶蚀-残积说应该是红土形成的真正机制。形成红土消耗的原岩可能是质纯碳酸盐岩,但更可能是含有泥质碳酸盐岩,甚至碎屑岩或粘土岩。红土中粘土矿物来源应该有二,一是原岩所夹粘土矿物,二是原岩中硅酸盐矿物溶解形成的次生粘土矿物;铁氧化物应该来自原岩中黄铁矿的次生演化。完整的红土剖面应该由红土层、杂色粘土层和碳酸盐岩腐岩组成。碳酸盐岩腐岩形成于包气带,由原岩中的碳酸盐溶解后再次沉淀形成,主要由钙华和残余碳酸盐晶体组成。红土地区的石漠化趋势主要与红土向地下岩溶空间渗漏有关。     

Short-term effect of temperature variation on the competition between PAOs and GAOs during acclimation period of an EBPR system

Sequencing batch reactor (SBR) for enhanced biological phosphorus removal (EBPR) processes was used to investigate the impact of the temperature shock on the competition between phosphorus-accumulating organisms (PAOs) and glycogen accumulating organisms (GAOs) in start-up stage. During the 34 days operation, SBR was set with temperature variation(0–5 d, 22±1°C; 6–13 d, 29±1°C; 14–34 d, 14±1°C). PAOs and GAOs were analyzed by fluorescent in situ hybridization (FISH), and intracellular polyphosphate granules were stained by Neisser-stain. The results showed that the influence of temperature shock on PAOs’ abundance was more serious than that on GAOs in the enriching process. Under sudden and substantially temperature variation, from 22±1°C to 29±1°C and then to 14±1°C, the domination of PAOs was deteriorated. After temperature shock, PAOs’ competitive advantages at low temperature that concluded in other study did not appear in our study. As mesophilic, GAOs (indicated by Alphaproteobacteria and Gammaproteobacteria) were more temperature adaptive and better grew and took the domination at 14±1°C in the end. In the competition process, organisms of tetrad forming organisms (TFOs)-like shape which were considered as typical GAOs, were observed. With the evidence of poly-P granules containing by Neisser-straining and result of FISH, these organisms of TFOs-like shape were better to be assumed as adaption state or a special self-protecting shape of PAOs.     

出水水头对自生生物动态膜过滤性能的影响

增加出水水头不利于自生生物动态膜(SFDM)的恢复.随着恢复期出水水头的增加,SFDM的稳定出水通量逐渐达到一个极限通量,约为35L·(m²·h)^-1.继续增大出水水头,稳定出水通量甚至有降低的趋势在相同的出水通量下,动态膜的稳定运行时间随着恢复期出水水头的增加而显著降低.当恢复期出水水头为0.5cm时,稳定运行的时间＞10d,当恢复期出水水头为10cm时,稳定运行时间＜5h.研究了产生上述现象的原因,并提出使每个过滤周期从出水水头为0处开始的操作策略.     

板料成形模拟中压边力处理的研究

针对弹性压边建立了一个力学模型 ,用于板料成形的动力显式有限元模拟。以NU MISHEET’93方盒拉深标准考题为例 ,模拟了方盒在不同压边力情况下的起皱情况。数值计算结果表明该模型能有效地模拟弹性压边力 ,并预测工件法兰部位的起皱状况。     

水解酸化-复合式膜生物反应器组合工艺处理涤纶碱减量废水的试验研究

采用水解酸化复合式膜生物反应器组合工艺处理涤纶碱减量废水。实验结果表明,本工艺处理效果非常明显,系统出水CODCr为26.6～68.03mgL,系统的CODCr总去除率达到93%～98%,对苯二甲酸的降解率超过94%。水解酸化工艺对苯二甲酸的降解作用很小,降解率为0.23%～6.02%;但对乙二醇的降解作用却非常明显,降解率达到58.94%～71.49%,水解酸化工艺将废水的可生化参数BC提高了0.173～0.227。多孔柔性悬浮填料,一方面,提高了对膜表面的冲刷作用,减少膜表面的沉积层;另一方面,增加了原生动物和后生动物在MBR中的数量,有效地减轻了膜污染。     

硫酸盐还原菌颗粒污泥形成条件研究

在生物反应器中培养出高活性的生物相是使其稳定、高效运行的关键．在上流式厌氧污泥床反应器中,对硫酸盐还原菌颗粒污泥形成过程及形成条件进行了研究,结果表明,在中温（35 ±1 ℃） 条件下,当进水SO^2-₄ 小于1600mg/L、COD/SO^2-₄大于3 时,控制反应器污泥负荷大于0.3kgsO^2-₄/kg Vss·d 、水力负荷为0.2m³/m²·h 有利于颗粒污泥的形成和生长．     

链条滚子精密成形新工艺

针对链条滚子成形存在的问题,提出了一种利用棒料以冷挤压成形为主,在连续模中进行多个工序连续成形的精密成形工艺方案,从而提高了材料的利用率和工厂的经济效益。     

圆管弯曲加工过程的数值模拟

采用显式有限元分析软件LS -DYNA ,对于圆形钢管的弯曲加工过程进行数值模拟。圆管弯曲加工模型是常见的回转引伸弯曲加工方式 ,并在分析模型中考虑了阻止钢管在弯曲加工过程中起皱和截面扁平化的芯轴 ,以及为了防止钢管弯曲的外侧的壁厚过分减薄在钢管的末端加上压力。通过数值模拟得到管壁的最大减薄和增厚部位 ,并讨论了芯轴的摩擦系数和钢管末端的压力对管壁厚度变化的影响。