炼油厂"三泥"离心脱水处理研究

通过对目前炼油厂“三泥”性状的调查，利用已有污泥处理设施进行了炼油厂“三泥”离心分离的现场试验，并分析了影响“三泥”离心分离处理工艺的主要因素，发现了离心机转速和絮凝剂投加量对“三泥”离心分离的有关规律和最佳操作条件，在此基础上，提出了适合炼油厂“三泥”处理系统的优化方案。     

COMPARATIVE STUDY OF OPTIMIZATION TECHNIQUES FOR IRRIGATION PROJECT PLANNING1

ABSTRACT: This study presents three optimization techniques for on‐farm irrigation scheduling in irrigation project planning: namely the genetic algorithm, simulated annealing and iterative improvement methods. The three techniques are applied to planning a 394.6 ha irrigation project in the town of Delta, Utah, for optimizing economic profits, simulating water demand, and estimating the crop area percentages with specific water supply and planted area constraints. The comparative optimization results for the 394.6 ha irrigated project from the genetic algorithm, simulated annealing, and iterative improvement methods are as follows: (1) the seasonal maximum net benefits are $113,826, $111,494, and $105,444 per season, respectively; and (2) the seasonal water demands are 3.03*10³ m³, 3.0*10³ m³, and 2.92*10³ m³ per season, respectively. This study also determined the most suitable four parameters of the genetic algorithm method for the Delta irrigated project to be: (1) the number of generations equals 800, (2) population size equals 50, (3) probability of crossover equals 0.6, and (4) probability of mutation equals 0.02. Meanwhile, the most suitable three parameters of simulated annealing method for the Delta irrigated project are: (1) initial temperature equals 1,000, (2) number of moves equal 90, and (3) cooling rate equals 0.95.     

岷江都江堰段水环境容量计算及水质综合评价

岷江水域兼有灌溉，供水，发电等多重功能。本文对岷江都江堰段水环境现状进行了模糊综合评价，并计算了水环境容量。     

OPTIMIZATION MODELING OF A NEW FACILITY FOR THE CALIFORNIA STATE WATER PROJECT1

ABSTRACT: A non-linear optimization model is applied to the California State Water Project (SWP) and portions of the Central Valley Project (CVP). The model accounts for the major hydrologic, regulatory, and operational features of both projects. The model maximizes long-term SWP yields over a 70-year period, using a quarterly time step. The potential for increased yield associated with a proposed facility improvement is evaluated with the model. The proposed facility is an extension of the Folsom-South Canal, which would allow water to be conveyed from the American River below Folsom Reservoir into New Melones Reservoir on the Stanislaus River or into the California Aqueduct. Model results indicate that extension of the Folsom-South Canal has the potential to increase SWP yields by 13 percent.     

生态足迹分析方法及其在国内的应用

生态足迹分析方法是90年代提出的可以定量的反映一个国家、地区、城市的可持续发展程度分析的计算模型。本文介绍了生态足迹模型的理论依据和计算方法，分析了生态足迹分析方法在我国的应用，并且指出了生态足迹分析方法的优缺点及其改进。     

芜湖市生态占用测度方法的分析与应用

应用Wackemagel等提出的生态占用测度方法对芜湖市2004年的生态占用和生态容量进行了分析和计算。利用生态占用分析方法从宏观上度量了芜湖市社会经济发展的可持续性以及生态状况。结果表明，计算年的人均生态赤字为3．757429226hm^2．并提出了相应的对策和措施，为芜湖市建设“生态城市”提供量化依据。     

安徽省土地资源人口承载力的动态研究

基于《安徽省统计年鉴》，对全省近10年的土地资源、粮食生产及人口增长状况进行了分析。在此基础上，运用相关数学模型对2005-2020年全省人口数量、耕地面积和粮食单产分别进行了预测。为了提高预测精确度，取各种预测方法的平均值。根据安徽省情将其划分为温饱型、小康型和富裕型三档生活标准，分别探讨了预测期内安徽省土地承载力状况，提出了相应的发展对策和建议，为全省发展粮食生产提供科学依据。     

环评中锅炉房大气污染源强的确定

在环境评价中,污染源强的确定对环境影响因素评价的分析结果有重要作用。对锅炉房污染物排放的分析表明,影响锅炉房大气污染物的主要因素有燃料的构成、发热量和燃烧方式等。确定锅炉房大气污染物的方法主要有物料衡算法、实测法和经验系数法。在这三种方法中,物料衡算法被普遍采用。在确定锅炉房大气污染物的排放量时,也可以采用物料衡算法和实测法相结合的方法。     

A hybrid decision-making approach based on FCM and MOORA for occupational health and safety risk analysis

IntroductionWith the development of industries and increased diversity of their associated hazards, the importance of identifying these hazards and controlling the Occupational Health and Safety (OHS) risks has also dramatically augmented. Currently, there is a serious need for a risk management system to identify and prioritize risks with the aim of providing corrective/preventive measures to minimize the negative consequences of OHS risks. In fact, this system can help the protection of employees’ health and reduction of organizational costs. Method: The present study proposes a hybrid decision-making approach based on the Failure Mode and Effect Analysis (FMEA), Fuzzy Cognitive Map (FCM), and Multi-Objective Optimization on the basis of Ratio Analysis (MOORA) for assessing and prioritizing OHS risks. After identifying the risks and determining the values of the risk assessment criteria via the FMEA technique, the attempt is made to determine the weights of criteria based on their causal relationships through FCM and the hybrid learning algorithm. Then, the risk prioritization is carried out using the MOORA method based on the decision matrix (the output of the FMEA) and the weights of the criteria (the output of the FCM). Results: The results from the implementation of the proposed approach in a manufacturing company reveal that the score at issue can overcome some of the drawbacks of the traditional Risk Priority Number (RPN) in the conventional FMEA, including lack of assignment the different relative importance to the assessment criteria, inability to take into account other important management criteria, lack of consideration of causal relationships among criteria, and high dependence of the prioritization on the experts’ opinions, which finally provides a full and distinct risk prioritization.     

长庆油田4731B型非金属集输管道老化特性实验研究

为推广非金属复合管在油田集输油领域的应用，明确其在集输环境中的老化特性是关键问题。基于集输油现场的工程条件，针对长庆油田试用的4731B型钢丝缠绕增强复合管，以采出原油、采出水为实验介质，通过挂片实验、水压爆破实验，借助电镜扫描、拉伸测试对复合管内衬层老化行为、拉伸性能以及复合管极限承压与老化特性进行研究。结果表明:采出原油与采出水均可渗透扩散进入内衬层内部，还会发生局部深入渗透；采出原油、采出水的局部渗透速率分别可达3.4，10.6 mm/a；在某些工况下，内衬层表面产生裂纹；短时间（168 h）内的介质渗透甚至裂纹对其机械性能影响较小，而光氧老化影响显著；现场服役813 d后，复合管极限承压下降2.79%，表明复合管承压性能稳定。