大宝山矿区水体和沉积物中重金属的污染评价

分别于丰水期和枯水期对广东省大宝山矿区铁龙拦泥坝至凉桥河段水体中溶解态的重金属进行了调查,应用EPA推荐的健康风险评价模型发现,水体中非致癌物通过饮水途径所导致平均个人年风险排列顺序是Cu〉Pb〉Zn,最大值的平均个人年风险在丰水期和枯水期的平均值分别是2.14×10-7 a-1和4.13×10-7 a-1,小于国际防辐射委员会（ICRP）推荐的最大可接受平均个人年风险5.0×10-5a-1。致癌物Cd的平均个人年风险在丰水期和枯水期的平均值分别是3.52×10-4 a-1和4.53×10-4 a-1,大于ICRP推荐的最大可接受值,同时也大于非致癌物3～4个数量级。另外,通过对枯水期沉积物的重金属总量分析,发现凉桥槽对坑支流受水体pH的影响,导致其沉积物重金属的浓度最高。根据Long和Macdonald利用生物效应数据库法建立的沉积物质量基准,发现除冷水泾外,其他采样点的平均效应中值指数（mERMQ）值都大于1.5,可见沉积物中的重金属会对当地底栖生物产生毒害作用。     

有机化纳米粘土基絮凝吸附材料对马铃薯淀粉加工废水的资源化处理

采用物理化学提纯方法制备了有机化纳米粘土基絮凝吸附材料,经过以聚乙二醇2000(PEG-2000)、十六烷基三甲基溴化氨(CTAB)、四丁基氢氧化铵(TBAOH,质量分数25％)和溴化四苯基磷(TPPB)4种表面活性剂对絮凝吸附材料进行有机化修饰,并将其应用于马铃薯淀粉加工废水的资源化处理.实验结果表明,有机化纳米粘土...     

Novel mesoporous microspheres of Al and Ni doped LMO spinels and their performance as cathodes in secondary lithium ion batteries

A facile, scalable, and solution-based technique is used to fabricate Al and Ni-doped (LiAl_0.1Mn_1.9O₄ and LiAl_0.1Ni_0.1Mn_1.8O₄) microspheres of lithium manganese oxide (LMO) spinels for use as reversible cathode materials for lithium ion batteries (LIBs). The spheres of the two samples exhibit different porosities. Cells with these LMO-based cathodes are then cycled between 4.5 V and 2 V to study their stabilities while simultaneously being subjected to the undesirable Jahn-Teller distortion that occurs around the ~3 V regime. The LiAl_0.1Mn_1.9O₄ (LAMO) and the LiAl_0.1Ni_0.1Mn_1.8O₄ (LANMO) cells exhibit comparable open circuit voltages (OCV) of 2.94 V and 2.97 V, respectively. During cell cycling, the LAMO cell exhibits a maximum specific capacity of 122.51 mAh g^?1 with a capacity fade of 65.35% after 75 cycles. The LiAl_0.1Ni_0.1Mn_1.8O₄ (LAMO) sample fares better and exhibits a maximum of 140.49 mAh g^?1 and a capacity drop of 52.59%. Detailed structural studies indicate that Ni doping and the greater degree of porosity of the LANMO sample to be a stabilizing factor. This is further confirmed by cyclic voltammetry (CV) and AC impedance spectra analysis.     

羟基乙叉二膦酸镀铜废液的处理及Cu~(2+)的高附加值资源化回收

采用Na BH4还原法将羟基乙叉二膦酸(HEDP)镀铜废液中的Cu~(2+)制备成纳米铜粉,并采用聚丙烯酰胺(PAM)对还原反应后的废液进行絮凝处理。研究了n(Cu~(2+))∶n(Na BH4)、还原反应温度、还原反应时间及PAM添加量对废液中剩余Cu~(2+)质量浓度的影响,并对回收的纳米铜粉进行了XRD和TEM表征。实验结果表明:当n(Cu~(2+))∶n(Na BH4)=4∶6、还原反应温度为50℃、还原反应时间为2 h时,废液中剩余Cu~(2+)质量浓度降低至1.1 mg/L,Cu~(2+)还原率达99.99%;可获得粒径为20~45 nm的近球型、高纯度、由多晶组成的纳米铜粉;当PAM添加量为10 mg/L时,废液中剩余Cu~(2+)质量浓度降至0.35 mg/L以下,达到GB 21900—2008《电镀污染物排放标准》(小于0.5 mg/L)的要求。     

Occurrence, source diagnosis, and biological effect assessment of DDT and its metabolites in various environmental compartments of the Pearl River Delta, South China: A review

This review summarizes and analyzes available data in the literature (mostly after 2000) on the occurrence of dichlorodiphenyltrichloroethane (DDT) and its main metabolites, dichlorodiphenyldichloroethane (DDD) and chlorodiphenyldichloroethylene (DDE), in the environment of the Pearl River Delta (PRD), South China. Generally, the concentration levels of the sum of DDT, DDD, and DDE, designated as DDTs thereafter, have not significantly declined since 1983. However, the composition of DDTs residues has changed with time. DDTs in soil, freshwater sediment and freshwater fish species were mainly residues from chronological use. There is evidence that new point sources, such as dicofol and anti-fouling paint, may have contributed DDTs to various environmental compartments. Risk assessment against existing criteria indicated that the levels of DDTs in water and some fish species may pose adverse effects to humans or wildlife, and those in sediment/soil may also cause negative impacts to the eco-environment of the PRD.     

新型悬浮填料澄清池中填料对澄清作用的影响初探

为考察可取代传统二沉池的新型悬浮填料澄清池技术的原理及关键参数,小试试验研究了填料对新型悬浮填料澄清池固液分离过程中附着污泥形成及其絮凝性能的影响,并对填料在澄清中的作用机理进行了探讨。结果表明,当泥水界面上升至填料区后,可以形成较悬浮污泥更加致密稳定的附着污泥区,并形成孔道流,强化了对混合液中污泥颗粒的絮凝效果;填料区可以捕捉去除从悬浮污泥区中“逃逸”的微小污泥絮体,并降低出水浊度,有效地保证了出水水质的稳定性。填料的存在发挥了强大的整流作用,降低了雷诺数Re,提高了弗汝德数Fr,从而改善了污泥絮凝的水力条件,提高了澄清能力。     

壳聚糖衍生物-镁盐复配去除中性兰模拟废水色度的研究

研究了有机高分子絮凝剂NCTS-M对中性兰染料的絮凝性能。通过测量絮体的Zeta电位以及对絮体进行彩色电视显微扫描初步探讨了该絮凝过程的絮凝机理。结果表明,当投加量为30 mg/L,pH=6时,絮凝效果最明显,脱色率可达93.1%。其絮凝机理主要是压缩双电层以及高分子吸附架桥作用,以压缩双电层为基础。絮凝剂中镁离子在中性条件下对絮凝过程也起到了较强的助凝作用。     

基于生态安全的DAT-IAT城市污水处理工艺改进研究

通过正交试验,得到了DAT-IAT工艺和A/DAT-IAT工艺处理城市污水的常规指标去除和生态毒理指标削减的最优运行条件。结果表明,在正交试验的同一工艺中,COD去除最优运行条件的出水COD值优于生态毒性削减最优运行条件的出水COD值,但前者出水的生态毒性较大。由于厌氧池的水解酸化作用,A/DAT-IAT工艺对COD和生态毒性的处理效果均优于DAT-IAT工艺,并且回流总能耗低于DAT-IAT工艺,但是出水COD仍不达标。为了降低进入工艺的COD的总量,以絮凝沉淀做为预处理工艺,并采用Al残留量最小的絮凝剂投药量以降低出水中残留Al带来的生态风险。结果表明,在COD去除最优运行条件下,具有絮凝预处理的工艺对COD的去除效果优于没有絮凝预处理的工艺。絮凝-A/DAT-IAT工艺在COD去除最优运行条件下出水COD为104.46 mg/L,满足排放标准。在毒性削减最优运行条件下,具有絮凝预处理的工艺的出水生态毒性有所上升,但是污染物的总量得到了大幅削减。絮凝-A/DAT-IAT工艺与DAT-IAT工艺相比,在污染物去除效率得到大幅增加的同时,生态毒性得到有效控制,生态安全得到了有效的保障。     

Removal of an anionic dye (Acid Blue 92) by coagulation–flocculation using chitosan

Chitosan (a biopolymer) is an aminopolysaccharide that can be used for the treatment of colored solutions by coagulation–flocculation (as an alternative to more conventional processes such as sorption). Acid Blue 92 (a sulfonic dye) was selected as a model dye for verifying chitosan's ability to treat textile wastewater. A preliminary experiment demonstrated that chitosan was more efficient at color removal in tap water than in demineralized water, and that a substantially lower concentration of chitosan could be used with tap water. Dye removal reached up to 99% under optimum concentration; i.e., in terms of the acidic solutions and the stoichiometric ratio between the amine groups of the biopolymer and the sulfonic groups in the dye. The flocs were recovered and the dye was efficiently removed using alkaline solutions (0.001–1 M NaOH solutions) and the biopolymer, re-dissolved in acetic acid solution, was reused in a further treatment cycle.     

Regional impervious surface estimation: an urban heat island application

This paper describes a GIS-based estimation method that can be used to forecast future amounts of impervious surface as a mitigation measure for urban heat island effect in a metropolitan region. The method is unique because it employs a regression model that links the existing amount of impervious surface to population and employment at the census tract level. This approach provides a means to forecast future amounts of impervious surface based on projected population and employment. The method also includes a detailed analysis of high-resolution aerial photography to divide impervious surfaces into different categories. Subdividing impervious surfaces is necessary to evaluate potential urban heat island mitigation policies for different types of impervious surface. The analysis here shows that the impervious surface in the metropolitan Atlanta region will increase to 2638 km2 2. “The Albedo is defined as the hemispherical reflectivity averaged over the solar spectrum. A perfect reflector has a = 1, and a perfect absorber has a = 0” (Pomerantz et al. 1999 Pomerantz, M. 1999. Reflective surfaces for cooler buildings and cities. Philosophical magazine B, 79: 1457–1476. [Taylor & Francis Online], [Web of Science ®] [Google Scholar], p. 1458). View all notes in 2030, an increase of 45% from 2000. The most common type of impervious surface is dark-coloured pavement. Within this study area, the analyses showed that two-thirds of impervious surfaces are dark. Replacing dark pavement with light pavement materials, therefore, represents an important opportunity to mitigate the urban heat island effect in the Atlanta region.