Determination and discussion hydraulic retention time in membrane bioreactor system

Based on the microorganism kinetic model, the formula for computing hydraulic retention time in a membrane bioreactor system (MBR) is derived. With considering HRT as an evaluation index a combinational approach was used to discuss factors which have an effect on MBR. As a result, the influencing factors were listed in order from strength to weakness as: maximum specific removal rate K, saturation constant Ks, maintenance coefficient m, maximum specific growth rate ,ua and observed yield coefficient Yobs. Moreover, the formula was simplified, whose parameters were experimentally determined in petrochemical wastewater treatment. The simplified formula is θ= 1.1( 1/β -1)(Kｓ S)/KXo , for oetroehemical wastewater treatment K and Ko eaualed 0.185 and 154.2, resoectively.     

A THEORETICAL TRAVEL TIME BASED ON WATERSHED HYPSOMETRY1

ABSTRACT: The time to hydrograph peak of a watershed basin has been found to correlate with various statistical attributes (e.g., skewness and kurtosis) of its hypsometric curve (treated as probability distribution). This paper presents a theoretical travel time that is conceptually analogous to the time to hydrograph peak and can be calculated directly from the hypsometric curve of a watershed basin based on gravity and acceleration. The theoretical travel times for 23 selected watersheds in the United States are found to correlate significantly with their corresponding hypsometric attributes. In addition, the theoretical travel times are consistent with the times of concentration estimated from the Federal Aviation Administration method. Thus, this paper offers a simple theoretical explanation to the empirically identified linkage between time to hydrograph peak and hypsometric attributes. This theoretical travel time can provide an alternative way of characterizing the effects of basin morphometry on hydrologic response.     

PREDICTIVE MODEL FOR NITRATE LOAD IN THE BULL RUN WATERSHED,OREGON1

ABSTRACT: Predictive models for nitrate in four streams in the Bull Run Watershed in the Cascade Mountains of Oregon were developed from a record of 17 years of nitrate samples. The models are time series regression models written in terms of Log(nitrate load). The independent variables are logarithm of 14-day mean daily stream discharge, current day's precipitation, logarithm of the previous day's precipitation, total precipitation for the previous seven days, a hydrograph position variable that indicates rising or falling limb, and average maximum air temperature for the preceding 14 days. The models describe annual cycle and seasonable trends and variations in nitrate load, but are unable to describe large day to day variations like those associated with hydrograph peaks.     

显微构造分析法和包裹体方法在断层研究中的应用

在工程建设中，工地及邻近地区的断层活动性是工程设计的一项重要依据。在总结以往研究的基础上，介绍了显微构造分析法和包裹体方法在断层活动性评价中的国内外最新研究成果。事实表明，这两种方法在工程地质领域具有良好的应用前景。     

孟连,丽江地震前云南天文台时纬残差异常

本文分析了云南天文台光电等高仪自有观测以来的时纬残差异常与云南及其周邻地区大地震的对应关系；并报导了孟连、丽江地震前云南天文台的时纬残差均有明显异常。这再次证明时纬残差的明显异常可为台站周围的强震预测提供可靠信息     

THE ARMA MODELS APPLIED TO THE FLOW OF KARSTIC SPRINGS1

ABSTRACT: Autoregressive moving average (ABMA) models have been applied to study the flow series of the karstic springs of La Villa, Fuente Mayor (Spain), and Aliou (France). The theoretical meaning of the parameters involved in the model upon applying it to a simplified scheme of the emptying of a karstic aquifer is first analyzed. The types of transformations necessary to apply these models to the flow series that lack normality and have strong periodic components are also indicated, as are the advantages of this type of model and the physical significance of the parameters obtained, with respect to the standpoint of hydraulics, ranging from rather homogeneous aquifers (La Villa) to extremely karstic (Aliou), including aquifers with intermediate characteristics (Fuente Mayor).     

变光焊接眼护具响应时间定义分析

通过对不同标准的变光焊接眼护具响应时间定义分析，提出各标准定义及计算值的区别，以利于帮助消费者进行产品选择和企业对产品设计的改进。     

高耸建筑物定向爆破中切口长度安全范围的研究

爆破拆除高耸筒体结构时 ,爆破切口长度的合理选取是爆破成功的重要因素。目前的实践经验 ,爆破切口长度取为切口处筒体圆周长的 6 0 %～ 6 6 % (即 3/ 5～ 2 / 3) ,按此取值范围进行施工 ,爆破效果的好坏并存 ,事故仍有发生 ,这说明此取值范围偏大。借助有限元软件ANSYS ,通过数值计算 ,可获得起爆瞬间 ,在结构自重作用下引起的爆破切口支撑部的应力与应变状态 ,因而 ,可分析出爆破切口长度较安全的取值范围。对比实际拆除爆破的效果 ,爆破切口长度取切口处筒体圆周长的 6 2 %～ 6 4 %是比较安全适宜的。数值分析所得出的结论 ,对爆破设计施工有一定的借鉴意义     

一种DSP+FPGA实时信号处理系统

简要叙述了常用的信号处理系统的类型与处理机结构,介绍了正逐步得到广泛应用的DSP+FPGA处理机结构,在此基础上提出了一种实时信号处理的线性流水阵列,并举例说明了该结构的具体实现,最后分析说明了此结构的优越性。