土壤气相抽提法去除红壤中挥发性有机污染物的影响因素研究

土壤气相抽提技术(SVE)是一种安全、经济、高效的土壤治理技术,广泛应用于不饱和土壤中挥发性有机污染物的去除.本实验以我国南方典型土壤红壤(粘性较大的土壤)为实验土样,选用最常见的挥发性有机物苯作为污染物,采用一维土柱通风模拟SVE过程,研究了通风流量、土壤含水率以及间歇操作对苯污染红壤去污过程的影响.结果表明,在各土柱垂向气相中苯浓度变化趋势一致,通风初期浓度迅速降低后进入长时间的拖尾阶段,拖尾阶段初期进行间歇操作可降低能耗达到较经济的治理效果.通风流量与土壤含水率是影响净化时间和修复效果的重要因素,两者均存在最佳值.当通风流量为600 mL/min,含水率为17.2%时本实验净化时间降低为36 h,去除率为99.9%,达到了最佳的治理效果.     

泥石流灾害风险评价方法及其应用研究

探讨泥石流灾害风险评价的理论和方法;利用已有的泥石流灾害资料,建立泥石流风险评价体系和实施流程;提出风险评价的定量计算方法;结合遥感和地理信息系统技术,完成了云南省昆明市东川区泥石流灾害的定量风险评价。研究结果与泥石流实际分布和调查资料基本一致,表明所提出的泥石流灾害风险评价的理论与方法具有一定的理论价值和现实意义,可以为泥石流灾害风险评价和防灾减灾管理提供有益的科学依据。     

曝气-过滤一体化装置脱氮除磷的研究

曝气-过滤一体化装置将生物反应器与过滤机理有机结合,较好地维持了反应器中的高污泥浓度,实现了水力停留时间（HRT）与污泥停留时间的分离。采用连续流间歇曝气工艺对该装置的脱氮除磷效果进行了研究。实验结果表明：在HRT为8h,运行方式为曝气2h、停曝2h的条件下,COD去除率为95．55％,NH3-N未检出,TN为84．90％,TP为93．69％,出水各项指标都达到了GB8978-1996（污水综合排放标准》一级排放标准要求。     

Anthropogenic metal cycles in China

The flows and stocks of seven important industrial metals were characterized for mainland China for several years in the dynamically changing decade of 1994–2004. One-year snapshot cycles are provided for chromium, nickel, and silver. For copper, zinc, lead, and iron, multiple-year cycles have been completed; they demonstrate that the flows of these metals into use in China doubled between 2000 and 2004. Although the Chinese per capita flows from production to disposal are mostly shown to be below the global average rate, they are increasing or are expected to increase dramatically. The metal resource efficiency is evaluated for several indicators of material flow analysis; these metrics for China are also below the global average values. The research quantitatively illustrates that China’s metal cycles may pose significant resource and environmental challenges in terms of their magnitudes and potential for growth.     

A method for regional-scale material flow and decoupling analysis: A demonstration case study of Aichi prefecture, Japan

We have developed a method to analyse the annual material flow in a prefecture and have calculated environmental indicators for a prefecture. Material flow analysis (MFA) is important to clarify the structure of a regional society and obtain environmental indicators for a circular society. However, MFA has not advanced in local governments because of few local statistics. We have developed a method to analyse the annual material flow in Aichi prefecture from 1980 to 2000 using an input–output (I–O) table and statistics of Aichi. We have verified the accuracy of this method by comparing its results for 2000 which calculated on the basis of official I–O table for 1995 with the I–O table data for 2000; the correlation coefficient obtained in this case is greater than 0.95. Moreover, by performing MFA, we have estimated the resource consumption and decoupling indicator of each industry in Aichi prefecture from 1980 to 2000. We could obtain more detailed and accurate environmental indicators by using our method. From these results, we could estimate the progress of Aichi prefecture towards a circular society.     

Channel flow and trichloroethylene treatment in a partly iron-filled fracture: experimental and model results

Technical developments have now made it possible to emplace granular zero-valent iron (Fe(0)) in fractured media to create a Fe(0) fracture reactive barrier (Fe(0) FRB) for the treatment of contaminated groundwater. To evaluate this concept, we conducted a laboratory experiment in which trichloroethylene (TCE) contaminated water was flushed through a single uniform fracture created between two sandstone blocks. This fracture was partly filled with what was intended to be a uniform thickness of iron. Partial treatment of TCE by iron demonstrated that the concept of a Fe(0) FRB is practical, but was less than anticipated for an iron layer of uniform thickness. When the experiment was disassembled, evidence of discrete channelised flow was noted and attributed to imperfect placement of the iron. To evaluate the effect of the channel flow, an explicit Channel Model was developed that simplifies this complex flow regime into a conceptualised set of uniform and parallel channels. The mathematical representation of this conceptualisation directly accounts for (i) flow channels and immobile fluid arising from the non-uniform iron placement, (ii) mass transfer from the open fracture to iron and immobile fluid regions, and (iii) degradation in the iron regions. A favourable comparison between laboratory data and the results from the developed mathematical model suggests that the model is capable of representing TCE degradation in fractures with non-uniform iron placement. In order to apply this Channel Model concept to a Fe(0) FRB system, a simplified, or implicit, Lumped Channel Model was developed where the physical and chemical processes in the iron layer and immobile fluid regions are captured by a first-order lumped rate parameter. The performance of this Lumped Channel Model was compared to laboratory data, and benchmarked against the Channel Model. The advantages of the Lumped Channel Model are that the degradation of TCE in the system is represented by a first-order parameter that can be used directly in readily available numerical simulators.     

Hot water flushing for immiscible displacement of a viscous NAPL

Thermal remediation techniques, such as hot water flooding, are emerging technologies that have been proposed for the removal of nonaqueous phase liquids (NAPLs) from the subsurface. In this study a combined laboratory and modeling investigation was conducted to determine if hot water flooding techniques would improve NAPL mass removal compared to ambient temperature water flushing. Two experiments were conducted in a bench scale two-dimensional sandbox (55 cmx45 cmx1.3 cm) and NAPL saturations were quantified using a light transmission apparatus. In these immiscible displacement experiments the aqueous phase, at 22 degrees C and 50 degrees C, displaced a zone with initial NAPL saturations on the order of 85%. The interfacial tension and viscosity of the selected light NAPL, Voltesso 35, are strongly temperature-dependent. Experimental results suggest that hot water flooding reduced the size of the high NAPL saturation zone, in comparison to the cold water flood, and yielded greater NAPL mass recovery (75% NAPL removal vs. 64%). Hot water flooding did not, however, result in lower residual NAPL saturations. A numerical simulator was modified to include simultaneous flow of water and organic phases, energy transport, temperature and pressure. Model predictions of mass removal and NAPL saturation profiles compared well with observed behavior. A sensitivity analysis indicates that the utility of hot water flooding improves with the increasing temperature dependence of NAPL hydraulic properties.     

侧部点式排烟隧道火灾临界风速研究

为得到侧部点式排烟模式隧道火灾临界风速无量纲计算式,针对隧道侧部点式排烟模式,根据π定理和相似理论,采用量纲分析方法分析影响临界风速的相关因素,推导出影响临界风速3个因素的无量纲函数关系式;采用数值模拟方法,确定临界风速与火灾热释放速率、排烟量、排烟口距火源距离的量化关系.研究结果表明:当无量纲排烟口距火源距离小于2....     

衍生T形槽干气密封稳态性能研究

目的 设计具备双向旋转特点的动压型干气密封端面结构,并展现良好的开启性能,以T形槽为优化对象,衍生出一种新型槽型结构。方法 借助有限元软件,计算并对比经典T形槽与衍生槽型在流场特性和稳态性能方面的差异,探讨不同参数对2种槽型干气密封稳态性能的影响规律,揭示衍生槽型的密封机理。结果 衍生槽型的开启力高于经典T形槽,泄漏率也会增加。随着工况参数的升高,2种槽型的稳态性能参数近似线性增加,且差异逐渐增大,最小差异达到6.6%。随着槽深的增加,泄漏率方面的差距在逐渐减小,为扩大衍生槽型的控漏效果,槽深应>5μm。开设有引流槽型结构的衍生槽型稳态性能顺序为发散型>直口型>收敛型,但在文中的工况下,数值差别较小,最大仅为1.2%。结论 相比于经典T形槽,衍生槽型具有更强的动压效应,开启性能明显提升。另外,通过开设不同形式的引流槽可以改变气膜的流动特性和干气密封性能。     

基于雨量(强)条件的泥石流预测预报研究现状、问题与建议

在对基于雨量(强)条件泥石流预测预报现状综合分析的基础上,提出了目前降雨型泥石流预测预报中存在的问题:①前期降雨对泥石流发生的贡献问题;②前期降雨对泥石流影响的衰减问题;③前期有效降雨天数的确定问题;④前期降雨和短历时降雨的权重衡量问题;⑤基于前期有效雨量的泥石流预测预报模式的确定问题。提出了降雨型泥石流预测预报程式框架和相关建议:①基于雨量(强)条件的泥石流预测预报应同机理研究密切结合;②单沟泥石流临界雨量条件和预测预报应同泥石流类型密切结合;③区域泥石流临界雨量条件和预测预报应同环境地质背景密切结合。