资源型城市的“无废城市”建设模式探讨

资源型城市在我国经济发展大局中地位重要而特殊、历史贡献突出,城市发展的生命周期特征和物质代谢的"大进大出"特征明显,固体废物(以下简称固废)治理问题积弊已久、复杂多变。如何建设"无废城市"模式的资源型城市,是当前城市可持续发展和"无废城市"实践亟待破解的难题。本文研究分析了2017年我国资源型城市固废产生、贮存、综合利用、处置环节及管理制度体系建设的主要问题,并从制度设计、产业转型、分类利用、标准建立四个方面提出了"无废"资源型城市建设的政策建议。根据资源型城市所处生命周期发展阶段的不同,提出了基于固废"产、存、用、置、销"的存量、流量挂钩约束的发展模式。同时提出以下建议:快速成长期城市应从产业体系构建、空间布局及准入条件着手控制固废增量;平稳成熟期城市应发展完善高值化资源综合利用产业体系和制度体系;枯竭衰退期城市应注重挖掘和开发存量固废的资源价值;再生发展期城市应加强多源废物协同处置利用产业体系建设。本研究可为资源型城市的"无废城市"建设提供模式参考和政策建议。     

连云港经济技术开发区危废处置情况的调查研究

通过对连云港市经济技术开发区内医药企业危废产生及库存等情况进行调查,针对目前危废处理处置过程中存在问题,提出解决对策及建议。     

微生物菌剂对好氧填埋垃圾稳定过程的影响

为加速好氧填埋场的稳定化进程,提出利用生物强化技术加速好氧填埋垃圾的生物降解,通过模拟实验,研究了微生物菌剂对填埋垃圾稳定过程的影响。结果表明:微生物菌剂降低了好氧填埋场的有机污染负荷,使渗滤液COD下降更加明显,整个填埋周期所产渗滤液的COD总量较对照组少20.20%;加速了含氮物质的生物转化,氨氮峰值出现较对照组提前6 d,经历峰值以后,氨氮快速下降,较对照组提前22 d达到国家生活垃圾填埋场污染控制标准(GB 16889-2008)所规定的渗滤液氨氮排放标准25 mg/L,并使整个填埋周期氨氮总量减少9.15%;微生物菌剂降低了渗滤液的产量,使整个填埋周期渗滤液累计产量减少8.29%;使垃圾中有机质降解加快并使其降解更加彻底,至实验结束时总有机质含量较对照组低8.82%,干重较对照组减少35.95%;沉降性能优于对照组,至填埋结束时较对照组沉降量提高6.35%。     

废铅酸蓄电池铅膏性质分析

为给废旧铅蓄电池铅膏的湿法回收工艺提供理论依据,对湖北金洋冶金股份有限公司破碎分选后的废铅膏进行了XRF、XRD、物理分析及化学分析等,确定了废铅膏的主要成分、理化性质等特性。结果表明,废铅膏粒径细小,碾钵磨细后能过120目的筛下物超过77.4%,这对湿法转化是有利的。废铅膏主要组成为64.5%PbSO4、29.5%PbO2、4.5%PbO、0.8%Pb及其他微量杂质元素,杂质主要包括Fe、Sb和Si等。因此,铅膏湿法处理时应该采取合适的净化工艺。     

Molten salt oxidation: a versatile and promising technology for the destruction of organic-containing wastes

Molten salt oxidation (MSO), a robust thermal but non-flame process, has the inherent capability of destroying organic constituents in wastes, while retaining inorganic and radioactive materials in situ. It has been considered as an alternative to incineration and may be a solution to many waste disposal problems. The present review first describes the history and development of MSO, as well as design and engineering details, and then focuses on reaction mechanisms and its potential applications in various wastes, including hazardous wastes, medical wastes, mixed wastes, and energetic materials. Finally, the current status of and prospects for the MSO process and directions for future research are considered.     

Deactivation and regeneration of ZSM-5 zeolite in catalytic pyrolysis of plastic wastes

In this work, a study of the regeneration and reuse of ZSM-5 zeolite in the pyrolysis of a plastic mixture has been carried out in a semi-batch reactor at 440 °C. The results have been compared with those obtained with fresh-catalyst and in non-catalytic experiments with the same conditions. The use of fresh catalyst produces a significant change in both the pyrolysis yields and the properties of the liquids and gases obtained. Gases more rich in C3-C4 and H₂ are produced, as well as lower quantities of aromatic liquids if compared with those obtained in thermal decomposition. The authors have proved that after one pyrolysis experiment the zeolite loses quite a lot of its activity, which is reflected in both the yields and the products quality; however, this deactivation was found to be reversible since after regeneration heating at 550 °C in oxygen atmosphere, this catalyst recovered its initial activity, generating similar products and in equivalent proportions as those obtained with fresh catalyst.     

Uptake,translocation, and control of trumpet flower (Tecoma stans) with aminocyclopyrachlor

To gain a better understanding of the physiology of the herbicide aminocyclopyrachlor in young plants of trumpet flower, the uptake and translocation were evaluated after the application of herbicide. This was determined by treating individual leaves with formulated herbicides plus ¹⁴C-aminocyclopyrachlor after the application of the formulated herbicide. This experiment used a randomized experimental design with three replications. In addition, field studies were conducted to assess the effectiveness of foliar applications of aminocyclopyrachlor in association with metsulfuton-methyl. The plant absorbed 20% of the herbicide applied. The translocation percentage did not surpass 5% of the total amount applied. Only 1% of the herbicide applied was translocated to the roots. Rate of 40 + 13 g a.i. 100 L^?1 of aminocyclopyrachlor+metsulfuron-methyl was effective to control T. stans.     

基于生命周期分析的餐厨垃圾肥料化利用环境风险评价研究

餐厨垃圾肥料化利用过程的风险因子主要产生于原料运输与存储、预处理、堆肥、废物填埋和肥料化产品施用5个过程,其风险影响包括地表水和地下水污染、恶臭污染、土壤盐碱化和影响作物生长以及由此引起的人体健康损害.基于生命周期全过程分析,以好氧堆肥为代表的餐厨垃圾肥料化利用的环境风险为研究对象,系统地分析了餐厨垃圾堆肥过程中的潜在风险,归纳并提出风险源项估算以及环境风险影响评价的具体方法和相关参数,通过南京市餐厨垃圾示范性项目案例,说明餐厨垃圾肥料化利用风险评价方法的具体应用.     

城市生物质废物厌氧消化前后粒径分布特征解析

在稳定运行的城市生物质废物厌氧消化中试研究结果基础上,对基质及消化液的有机物粒径分布特征进行解析。在反应器有机负荷为2.4、6.0和8.0 kg VS/(m3·d),停留时间为50、20和15 d 3个状态下,反应器对城市生物质废物有良好的去除效果,VS去除率均在60%以上。其中粒径96μm的大颗粒有机物去除率均在80%以上,负荷及停留时间对大颗粒有机物的去除效果没有表现出明显影响;随着负荷的增加及停留时间的缩短,消化液中粒径范围0.45~74μm的有机物及溶解性有机物的含量增加,去除率降低;研究结果表明,在传统的厌氧消化条件下,对于本研究中的城市生物质废物而言有机物的酶解过程是主要限速步骤。     

不干胶废弃物热重分析

为了探索不干胶类包装废弃物的热解特性,采用热重分析手段分析了不同升温速率条件下不干胶类废弃物的失重特点,并且采用Ozawa法和KAS法比较分析不同转化率条件下的表观活化能分布.热重分析结果表明,不干胶类废弃物的热解主要分为3个阶段:第1阶段(室温～ 200℃)为不干胶类废弃物的干燥阶段,第2阶段(200 ～ 590℃)为热解的主要阶段,第3阶段(590 ～800℃)为热解半焦的深度热解阶段.升温速率对热解失重率有重要影响,Ozawa法和KAS法计算结果表明,2种方法计算的热解活化能比较接近,Ozawa法得到的活化能为349.9 kJ/mol,KAS法得到的活化能为336.9kJ/mol;并且不干胶类废弃物的热解表观活化能呈现出阶段性分布.