Life cycle analysis and choice of natural gas-based automotive alternative fuels in Chongqing Municipality,China

Road transport produces significant amounts of emissions by using crude oil as the primary energy source. A reduction of emissions can be achieved by implementing alternative fuel chains. The objective of this study is to carry out an economic, environmental and energy (EEE) life cycle study on natural gas-based automotive fuels with conventional gasoline in an abundant region of China. A set of indices of four fuels/vehicle systems on the basis of life cycle are assessed in terms of impact of EEE, in which natural gas produces compressed natural gas (CNG), methanol, dimethylether (DME) and Fischer Tropsch diesel (FTD). The study included fuel production, vehicle production, vehicle operation, infrastructure and vehicle end of life as a system for each fuel/vehicle system. A generic gasoline fueled car is used as a baseline. Data have been reviewed and modified based on the best knowledge available to Chongqing local sources. Results indicated that when we could not change electric and hydrogen fuel cell vehicles into commercial vehicles on a large scale, direct use of CNG in a dedicated or bi-fuel vehicle is an economical choice for the region which is most energy efficient and more environmental friendly. The study can be used to support decisions on how natural gas resources can best be utilized as a fuel/energy resource for automobiles, and what issues need to be resolved in Chongqing. The models and approaches for this study can be applied to other regions of China as long as all the assumptions are well defined and modified to find a substitute automotive energy source and establish an energy policy in a specific region.     

氨法脱硫在热电厂中应用

随着二氧化硫对环境的污染越来越严重，国家环保局对燃煤电厂二氧化硫排放进行严格控制，电厂加装脱硫装置是迟早的事。阐述了氨法脱硫的工艺流程和自动控制．同时结合工程调试中出现的问题进行分析，为今后的脱硫工程提供一些借鉴。     

废气污染控制高新技术的研究与应用

列举了大量的事实，重点介绍了几种高新技术在废气污染控制中的研究与应用，说明了向环保发展迟缓领挑战依赖于科学技术，而环保的发展又向科学技术提出了更高的要求。     

煤飞灰中铬铁元素的形态分析研究

用连续提取法将煤飞灰中的铬、铁元素依结合态区分为水溶态,交换态,表面氧化物和碳酸结合态,铁锰氧化物结合态,金属有机物和硫化物结合态,磁性四氧化三铁结合态和硅铝酸盐矿物态,用原子吸收法及X-衍射分析进行测定。并对煤飞灰化学形态分布进行了讨论。     

对硝基氯苯废气治理研究

冷却凝固法处理含对硝基氯苯废气 ,用水作冷却剂直接冷却、冷凝、凝固、凝华废气中对硝基氯苯蒸气 ,废气中的升华物、粉尘和水蒸汽同时被分离 ,处理后的废气达到很高的净化程度。在此根据实验结果 ,得到在水蒸汽存在时对硝基氯苯蒸气分压和温度之间的关系     

麻石文丘里洗涤吸收器在APV尾气处理上的应用

介绍了ＡＰＶ喷雾干燥尾气的性质，原尾气系统存在的问题，改造中采取的措施、原理、流程和取得的效果。实践证明，用“麻石文丘里一次降温、洗涤—ＸＰ型塔板二次洗涤—旋流除雾器除雾”的改造方案，取代原“换热器降温—喷淋塔洗涤—折流脱水器脱水”的流程，取得了良好的降温、洗气和除雾效果，且工程费用低。     

循环悬浮式半干法烟气脱硫技术在煤粉锅炉中的应用

半千法烟气脱硫技术目前在国内正在快速推广应用中，但成功的实例还较少，还存在系统不可靠，技术指标达不到，故障率高等问题。介绍了循环悬浮式半千法烟气脱硫技术及首次在煤粉锅炉中应用的烟气净化新工艺：静电预除尘＋循环悬浮式半干法烟气脱硫＋布袋除尘，论述了净化原理及在我厂的实际应用情况。     

燃煤锅炉排烟脱硫技术

本文介绍了治理燃煤排烟除脱ＳＯ２的主要技术和工艺流程，并对其进行了比较。     

头盔式面罩和头带式面罩主要性能的比较研究

头盔式面罩和头带式面罩性能的比较：头盔式面罩具有佩戴容易、气密性好。工艺简单，但舒适性差，视野不如头带式面罩好等特点；头带式面罩具有舒适性好，视野宽阔，但工艺较复杂，佩戴不易气密等特点。     

固硫剂制备工艺探讨

探讨了循环流化床锅炉脱硫方法中固硫剂的制备工艺，对几种石灰石破碎设备及工艺进行了分析比较，通过柱磨机粉磨石灰石的工业试验，了解其产品粒度分布，从而择优确定固硫剂制备工艺流程。