Green energy generation through PEHF – a blueprint of alternate energy harvesting

In this work, an attempt has been made to harvest green energy from piezoelectric material using fluid flow in a conduit. Piezoelectric Energy Harvesting using Fluid Flow (PEHF) experimental model has been designed and the outputs obtained are compared with results obtained from simulations using ANSYS (computational fluid dynamics) and also with the mathematical modeling. The PEHF model has been utilized to analyze the effect of flow rate of water with reference to energy extracted. The full wave bridge rectifier and voltage doubler circuits have been used to obtain the direct current (DC) from the PEHF model. It is observed that the output obtained using experiments holds good in agreement with the results retrieved through simulations and mathematical results. The increase in flow rate of fluid leads to initially increase and then decrease in output of PEHF model as the maximum energy generated when flow rates (external force) matches with the frequency of excitation of the systems, i.e., at its resonance. The maximum energy output is generated at its resonance frequencies. It is observed that the full wave bridge rectifier circuit gives greater output as compared to a voltage doubler circuit.     

Dynamic contact angle effects on gas-liquid behaviors in the cathode of proton exchange membrane fuel cell with stirred tank reactor design

Liquid water management is still a critical issue in the improvement of proton exchange membrane fuel cell (PEMFC) performance. In this work, for the first time, the liquid water behavior and transport inside the cathode of a PEMFC with a stirred tank reactor (STR) design, rather than the conventional PEMFC flow channel design, are numerically studied. The dynamic contact angle (DCA) is applied to multiple wall boundaries in the numerical model through a user-defined-function (UDF) code, i.e., STR-DCA model. Another numerical model with the static contact angle (SCA) and same operating conditions, i.e., STR-SCA model, is also developed for comparison. The volume of fluid (VOF) method is employed in the simulation to track the gas-liquid interface. The results show that the liquid water distribution and transport are significantly different between these two models, indicating the remarkable effects of DCA on the simulation results. It is also verified the capability of STR-PEMFC to reduce the liquid water flooding, showing the potential of this channel-less type fuel cell in the further development.     

基于最小能量原理的平衡图调节法在矿井通风系统优化中的应用

根据最小能量原理,采用平衡图调节法解决矿井通风网络中风压不平衡的问题,建立矿井通风网络优化模型。根据矿山基本情况和平衡图原理绘制出通风网络"平衡图",采用不同的变换方法使得"平衡图"真正达到平衡,进而得出不同的优化调节方案,并进行风压平衡的验证。应用最小能量原理选出能耗最低的调节方案。并且,运用基于最小能量原理的平衡图调节法解决了矿山的实际问题,结果表明,运用该方法能形象直观地反映出风量、风压及功率之间的关系,在解决通风网络中风压不平衡问题的同时,既形象直观,又使得经济费用最低,保证矿山安全高效生产。     

太湖西岸水体污染物时空分布及解析

采用聚类分析、主成分分析及相关分析方法解析2015年太湖西岸入湖河流水质污染的时空分布特征及影响该区域水质的主要驱动因子。研究结果表明:时间上按污染程度将全年聚类为时段I(12月、1—3月)、时段II(11月、4—5月)和时段III(6—10月)3类;根据11项水质指标主成分分析提取3个主成分,可以解释75.49%的结果;时段I、时段II和时段III水质污染状况依次降低,空间上总体呈现出太湖西岸北部向南部递减的趋势;NH3-N、TN、Chl-a和SD是影响该水域水质的主要驱动因子。     

生物酶破胶水基压裂液影响因素的试验研究

与其他压裂液破胶剂相比,生物酶破胶剂能很好地保护环境,而影响生物酶破胶水基压裂液效果的因素主要是底物的浓度、酶的加量、pH值以及破胶温度.本文采用正交试验设计,分析了各因素对生物酶破胶水基压裂液效果的影响程度,并分析了各因素不同水平对压裂液黏度的影响趋势,结果表明调整各因素的不同水平可以实现不同的压裂液黏度和破胶时间,...     

双提升管催化裂化装置隔离汽油沉降器后的风险分析及对策

分析了双提升管催化裂化装置隔离汽油沉降器的方法及隔离后存在的风险,根据分析结果提出相应对策。     

超临界态二氧化碳再生活性炭法治理甲苯废气

制鞋业产生的含甲苯、苯和二甲苯废气的治理大多采用活性炭吸附法。该课题提出以压缩二氧化碳为脱附剂,采用超临界流体萃取技术再生活性炭及回收甲苯工艺。实验表明,以液态或超临界态的压缩二氧化碳作萃取剂,采用萃取法可完全再生活性炭,其采用液态优于超临界态;压缩二氧化碳对活性炭具有扩孔作用,可增加活性炭的吸附容量,多次再生的活性炭吸附容量几乎不变;萃取剂的用量和密度显著影响着活性炭的再生效率;活性炭捆包填充在脱附塔中,不会显著增加脱附的阻力。      

Mining compatibility with other projects in Spain: Solutions and benefits

Mining activities are compatible with other activities in space and time if they are developed together and adapted to each other. If permits are required for two projects that are not considered to be compatible, the authorities will be forced to decide which one has prevalence. In the event of conflict or dispute, it is always preferable to attempt to seek compatibility between projects rather than waste time, effort and money on contesting the prevalence decision, as costly and lengthy lawsuits will only delay the development of both projects, with the resulting loss of business opportunities. In this article, technical solutions designed to achieve mining compatibility with other projects are described in terms of benefits and synergies for the projects and benefits for the government that avoid complex decisions and proceedings and optimize revenues.     

钻井废液的固液分离工艺与设备

影响钻井废液固液分离的因素包括钻井废液的稀释比例、脱稳处理药剂的种类和加量、固液分离设备。文章介绍了钻井废液处理的基本流程,分析了钻井废液pH值对固液分离效果的影响,论述了卧式螺旋卸料沉降离心机的基本结构、设备参数和操作参数对固液分离效果的影响。     

最大熵模糊综合评价法在污灌区土壤重金属污染等级划分中的应用

以开封市化肥河污灌区为例,运用最大熵模糊综合评价法开展了土壤重金属(Cu、Zn、Cr、Pb、Cd、Ni、As)污染评价.结果表明: 在污灌区13个样点中,属于3级重污染的样点达11个,占总样点数的84.62%,只有位于化肥河上游的两个样点属于2级水平,污染较轻;在所有污染因子中,Cd和As的污染最为突出,其中Cd平均权重值为0.541 9,是最主要的污染因子.与内梅罗法综合指数法评价的结果相比较,最大熵模糊综合评价法能够显示更多的土壤污染信息,引入目标函数和隶属度,重视不同污染因子的权重,具有更高的准确性.