Analysis of gas dispersion and ventilation within a comprehensive CAD model of an offshore platform via computational fluid dynamics

Maintaining an adequate air flow with a desired air quality that is free from hazardous gases is among the most important actions taken toward the improvement of safety in any process plant. Due to the increased focus on the consequences of existing hazardous material on safety, health, and the environment, air quality and sufficient ventilation within a plant has been increasingly considered in the design stage. This paper investigates and analyzes methane and hydrogen sulfite dispersion and the effect of air ventilation within a CAD model of an offshore platform using computation fluids dynamics (CFD). In addition, this method and its principals could be utilized in any other hazardous environment. Simulations of possible hazardous events along with solutions for preventing or reducing their probability are presented to better assess the data. These investigations are performed by considering hypothetical hazardous scenarios which consist of gas leakages from pipes and process equipment under different conditions. After drafting a precise and highly detailed CAD model of the plant and performing CFD simulations on this model, the results of gas behaviors, dispersion, distribution, accumulation, and its possible hazards are investigated and analyzed. The larger amount of details of the actual plant model in CFD simulation are obtained by using a combination of different methods and software. These include PDMS for 3-D drawing of the plan, Rinoceros for geometrical integration of the process equipment and facilities, and Sharc Harpoon which meshes the model. Moreover, the probability of inducing ignitable or toxic concentration of gases within the atmosphere and air ventilation of the unit is considered by these investigations.     

Experimental data and CFD performance for cloud dispersion analysis: The USP-UPC project

Forecasting the behaviour of a flammable or toxic cloud is a critical challenge in quantitative risk analysis. Recent literature shows that empirical and integral models are unable to model complex dispersion scenarios, like those occurring in semi-confined spaces or with the presence of physical barriers. Although CFD simulators are promising tools in this regard, they still need to be fully validated with comprehensive datasets coming from experimental campaigns designed ad-hoc. In this paper, we present an experimental campaign carried out by a joint venture between University of São Paulo and Universitat Politècnica de Catalunya to investigate CFD tools performance when used to analyse clouds dispersion. The experiments consisted on propane cloud dispersion field tests (unobstructed and with the presence of a fence obstructing the flow) of releases up to 0.5 kg s⁻¹ of 40 s of duration in a discharge area of 700 m². We provide a full 1-s averaged propane concentration evolution dataset of two experiments, extracted from 29 points located at different positions within the cloud, with which we have tested FLACS^® CFD-software performance. FLACS reproduces successfully the presence of complex geometry, showing realistic concentration decreases due to cloud dispersion obstruction by the existence of a fence. However, simulated clouds have not represented the whole complex accumulation dynamics due to wind variation.     

Numerical modeling of water spray suppression of conveyor belt fires in a large-scale tunnel

Conveyor belt fires in an underground mine pose a serious life threat to miners. Water sprinkler systems are usually used to extinguish underground conveyor belt fires, but because of the complex interaction between conveyor belt fires and mine ventilation airflow, more effective engineering designs are needed for the installation of water sprinkler systems. A computational fluid dynamics (CFD) model was developed to simulate the interaction between the ventilation airflow, the belt flame spread, and the water spray system in a mine entry. The CFD model was calibrated using test results from a large-scale conveyor belt fire suppression experiment. Simulations were conducted using the calibrated CFD model to investigate the effects of sprinkler location, water flow rate, and sprinkler activation temperature on the suppression of conveyor belt fires. The sprinkler location and the activation temperature were found to have a major effect on the suppression of the belt fire, while the water flow rate had a minor effect.     

页岩气开发压裂返排液环境监管及对策建议

水力压裂技术是目前页岩气开发广泛采用的储层改造技术,但该技术的应用产生大量的返排液,返排液如何处置和监管引起了人们的广泛关注。本文收集了国内外压裂液的成分、返排液的水量和水质等资料,从深井灌注、市政污水处理厂处理后外排、现场处理后回用、现场处理后外排四种处理方式上,分析我国返排液环境监管存在的问题,针对实际问题提出对策建议,包括对化学品进行申报登记、制订污水排放的行业标准、对页岩气开发项目进行分段验收、鼓励研发污水处理新技术等。     

草海湿地生态系统健康评价

贵州省威宁草海是贵州最大的天然高原淡水湖泊,同时也是我国亚热带高原湿地生态系统的典型代表,成为中国西南地区迁徙水禽的重要越冬地和停歇地。但草海湿地生态系统由于人类活动加剧引起的其功能作用会削弱、生物多样性会降低、水体富营养化等生态环境问题多方面的影响导致其表现出明显的生态脆弱性,尤其是在其生态系统的生态环境方面表现尤为突出。如果草海受到多方面的影响不及时加以制止和消除,将直接威胁着草海湿地生态系统的稳定。本文首先从湿地的生态特征、功能和社会经济环境三个方面的30个主要影响草海生态健康的因子进行分析,并对每个因子的健康状况进行调查、分析说明。其次,利用模糊综合评价模型中的层次分析法对草海生态健康影响的30个主要因子进行了整合分析,并对草海现在的健康状况应用平均加权原则进行了评估。最后,针对草海目前的健康状况,对草海今后的防治提出了相关建议。     

评价爆炸超压作用的一个新指标及其在一次型FAE中的应用

利用单自由度体系在爆炸载荷作用下的动力响应的数值解,提出了一个近似关系式,进而得到一个新评价指标△P0.742m i0.258 .同时给出了一次型FAE的TNT比当量的计算方法,分别以超压峰值△Pm和△P0.742m i0.258 为评价指标计算了某一次型FAE的TNT比当量,并进行了比较.结果表明,单纯以超压峰值为评价指标的TNT比当量结果低估了一次型FAE的超压作用.鉴于爆炸超压场测试仪器与技术已能够容易地准确测量超压峰值与比冲量,建议以△P0.742m i0.258 为一次型FAE的TNT比当量的评价指标.     

中远船务构筑特色安全文化的探索与实践

本文主要阐述了在企业核心价值理念孵化牵引下生发的安全文化理念,总结和提炼了具有企业特色的“严、细、真、实、慎”的安全文化,并从制度建设、行为规范以及体现执行力的十大主要措施上,进行了比较系统的论述,对进一步促进企业安全文化建设提出了4个方面的对策。     

三峡地区农业经济监测原理与方法研究

提出了经济系统抟动监测原理，认为受扰动Ｘ作用的系统Ｓ的特征指标（监测指标）Ｏ的变化量△Ｏ分为由系统Ｓ自身发展引起的变化量△Ｏ和由扰动Ｘ的作用引起的变化量△Ｏｘ，即△Ｏ＝△Ｏ＋△Ｏｘ，监测的目的是考察由扰动Ｘ引起的指标Ｏ的变化量△Ｏｘ，提出了建立经济系统监测指标体系。针对５项原则和三峡地区农业经济指标体系。针对不同系统特点和扰动特性，提出８种监测方法。以对三峡库区秭归县水田坝乡眩坝区域柑桔产业开发对     

An alternative CFD tool for gas dispersion modelling of heavy gas

The numerical simulation of gas dispersion is of great importance in various areas of engineering such as optimisation, synthesis of chemical process, petroleum industry and process safety. The OpenFOAM (Open Field Operation and Manipulation) code is a free and open source computational fluid dynamics (CFD) program. The current research is focused on the development and customisation of a computational tool for handling gas dispersion of heavy gases, such a LNG and CO₂. The novel CFD tool relies on OpenFOAM framework. The core of the work is based on the OpenFOAM solver rhoReactingBuoyantFoam to handle gas dispersion. A series of CFD simulations has been performed for methane and CO₂. The source term of the former is modelled by HSM (Hybrid Switch Model). The model comprises contribution from HEM (Homogeneous Equilibrium Model) approach, frozen model and non-equilibrium model for CO₂ leak. The novel approach switches between equilibrium and non-equilibrium conditions based on the meta-stable parameter on the grounds of thermodynamics and experimental observations. Good agreement with experimental data is observed. Numerical findings for methane leakage from the proposed CFD tool are compared with experimental data and FLACS. Good agreement is observed.     

硐室爆破中安全填塞长度设计原则的研究

通过分析药室体积和药室横断面积，应用气体运动相似的特性，推导出一种新的硐室爆破填塞长度设计原则，并给出了计算实例