Hazard analysis on LPG fireball of road tanker BLEVE based on CFD simulation

In order to research the hydrocarbon fireball characteristic of LPG tanker Boiled Liquid Evaporate Vapor Explosion (BLEVE) under different conditions, computational fluid dynamics (CFD) simulations of the hydrocarbon fireballs from the LPG tanker BLEVE accidents were carried out. Several new different factors, such as the mass of fuel, inlet velocity and airflow velocity, were considered to analyze the influence on the evolution of the characteristics of the fireball and the development of the LPG tanker BLEVE accidents. Results indicate that the fireball with a greater mass of fuel radiates more heat but slower. The large longitudinal diameter of the fireball and high radiation heat flux are observed in case of a faster inlet velocity used for the same mass. The airflow was found to shorten the initial phase of the fireball effectively. Some suggestions were proposed to prevent the LPG BLEVE accidents. Analysis performed show that various parameters like fireball diameter, radiative heat flux and lifting speed of fireball can be predicted well using FDS code.     

废弃饱和盐水钻井液的固液分离

采用化学破胶脱稳和压滤机械分离的化学强化固液分离技术处理江汉油田废弃饱和盐水钻井液(简称废钻井液).最佳固液分离工艺为:调节废钻井液的pH为6.5左右,先加入无机破胶剂(HWJ),HWJ的加入量为15 000 mg/L,以400 r/min的转速搅拌3 min,稀释1倍后,再加入有机破胶剂(HYJ),HYJ的加入量为300 mg/L,以120 r/min的转速搅拌5min.固液分离结果表明,分离后出水率达68.2%,而泥饼湿含量只有55.8%,废钻井液的COD由67 886.8 mg/L降至8 898.9 mg/L.     

废弃印刷线路板中材料的资源化回收利用技术

废弃印刷线路板（WPCBs）既有污染环境的一面,又有可资源化回收利用的一面.通过机械物理法、热解、超临界流体氧化和离子液体溶解等方法对其进行分离和回收金属和非金属材料.初步分选的金属需要进一步提纯以实现高附加值.而非金属材料可以用热解法、微波处理、超临界流体技术、等离子技术等技术进行产气和能量回收,也可以通过制备建筑材料或填料和其它功能村料进行物料回收.总之,对WPCBs进行适当地处理不但可以减轻环境压力,还可以变废为宝,实现资源再生利用.     

Eco-Labelling of Shampoos,Shower Gels and Foam Baths (6 pp)

GOAL, SCOPE AND BACKGROUND: Environmental issues of personal care products have been met with little attention in the past. Monitoring data as well as preliminary environmental risk assessments indicate that some ingredients in personal care products might be relevant pollutants in the environment. Following the precautionary principle, eco-labelling is proposed as an effective tool for source control of one major group of personal care products, shampoos, shower gels and foam baths (SSBs). Eco-labelling is a soft, but effective market driven and product specific approach to lower discharge of environmentally detrimental substances. Products that fulfil the criteria proposed help to minimise the impact of SSBs on the environment. METHODS: Available assessment tools for dangerous substances (e.g. current legislation on environmental risk assessments and classification, and labelling, eco-labelling criteria for similar products, the calculation of the critical dilution volume) were adapted and integrated into the criteria for the eco-labelling of SSBs. RESULTS AND DISCUSSION: A short outline of the eco-labelling criteria developed for SSBs is provided. The basic criteria concern the effects of the substances discharged into the waste water during and after use. Products with an eco-label award may exclusively contain substances for which basic information about their effects on the environment is available. They may not contain persistent, bioaccumulating, toxic or ecotoxicological substances. In addition, the basic criteria include requirements for the container and consumer information. CONCLUSION: The basic criteria for eco-labelling SSBs are based on the actual state of science and are at the same time as simple and transparent as possible to ensure the best applicability. SSBs that comply with the described basic criteria can contribute to a lower chemical burden of waste water treatment plants and surface water. RECOMMENDATION AND OUTLOOK: The proposal for basic criteria described should stimulate discussion on eco-labelling of SSBs. It should help to pass valid criteria supported by authorities, producers and consumer groups for a national or international eco-label, e.g. for the European Flower or the German Blue Angel. In future, the successful introduction of labelled SSBs into the market will raise the awareness of the general public about the environmental effects of personal care products and it will help to promote environmentally compatible products.     

旋风分离器内高速旋转流场的数值计算方法选择

数值计算方法已成为研究旋风分离器内部流场的重要途径。利用计算流体力学方法对旋风分离器内部气相流场进行了数值模拟研究。分析了不同湍流模型、离散化方式和压力插值方式对旋风分离器内部计算流场的影响,并将所得数值结果与已知的实验数据进行了对比,以期得到最适合的数值模型。结果表明:对于旋风分离器内部复杂流场的流动,运用雷诺应力模型(Low-Re Stress-Omega)能够较好地预测出强制涡中心涡流的运动情况,同时采用SIMPLEC算法、二阶迎风离散化方式和PRESTO压力梯度插补格式能够获得最好的预报结果。     

基于CFD的两种紫外消毒模型的比较研究

为了预测紫外反应器的消毒效率,提高模拟的准确度,对两种紫外光强模型进行了比较分析。利用CFD技术,采用数值模拟的方法,对线源和柱源两种光强模型进行了光强分布以及消毒效率的模拟,并采用生物实验进行了验证。结果表明:与柱源模型相比,线源模型在近灯管处强度高42.3%,在1.2 cm处二者趋于一致;针对同一管式紫外反应器,透光率为95%时,线源模型的模拟结果偏大,柱源结果偏小;透光率为80%时,线源及柱源模型的模拟结果都偏大,流量及模型影响较小,透光率成为主要影响因素。综合比较,柱源模型适用于小型管式紫外灯消毒数值模型的开发。     

Bioaccessibility of arsenic in various types of rice in an in vitro gastrointestinal fluid system

Rice can be a major contributor to dietary arsenic exposure because of the relatively high total arsenic concentration compared to other grains, especially for people whose main staple is rice. This study employed in vitro gastrointestinal fluid digestion to determine bioaccessible or gastrointestinal fluid extractable arsenic concentration in rice. Thirty-one rice samples, of which 60 % were grown in the United States, were purchased from food stores in New York City. Total arsenic concentrations in these samples ranged from 0.090 ± 0.004 to 0.85 ± 0.03 mg/kg with a mean value of 0.275 ± 0.161 mg/kg (n = 31). Rice samples with relatively high total arsenic (>0.20 mg/kg, n = 18) were treated by in vitro artificial gastrointestinal fluid digestion, and the extractable arsenic ranged from 53 % to 102 %. The bioaccessibility of arsenic in rice decreases in the general order of extra long grain, long grain, long grain parboiled, to brown rices.     

Application of nanobalance technique and principal component analysis for detection of the soil fumigant Telone residues in the air

Quartz crystal nanobalance (QCN) technique is considered as a powerful mass sensitive sensor for monitoring of materials in the sub-nanogram level. In the current study, a method based on QCN technique developed to determine Telone in air. Various coating materials including methyl phenyl silicon, 75% phenyl (OV25) and molecularly imprinted polymer (MIP) were employed. The frequency shift of OV25-modified quartz crystal was found to be linear against organohalogen compounds [Telone (soil fumigant), Koril (Herbicide), Endosulfan (organochlorine insecticide) and Chloroform (solvent)] concentrations in the range of 2.4 to 48 mg L^?1 for Telone vapor and 4.8–24 mg L^?1 for three other vapors. The correlation coefficients for Telone, Koril, Endosulfan and Chloroform were 0.992, 0.996, 0.989 and 0.991, respectively. The principal component analysis was also utilized to process the frequency response data of the organic vapors. Using principal component analysis, it was found that more than 93.85% of the data variance could still be explained by use of two principal components (PC1 and PC2). Subsequently, the successful discrimination of Telone and other compounds was quite possible through the principal component analysis of the transient responses of the OV25-modified electrode. In the second method, a molecularly imprinted polymer-coated sensor for Telone was developed. Molecularly imprinted polymer coated quartz crystal (MIP-QCN) showed a selective response to Telone and gave a linear relationship between frequency shift and amount of Telone from 1 to 48 mg L^?1. In this investigation, the proficiency of MIP-QCN and OV25-modified QCN sensors were compared.     

HPLC determination of chlorate metabolism in bovine ruminal fluid

Salmonella and Escherichia coli are two bacteria that are important causes of human and animal disease worldwide. Chlorate is converted in the cell to chlorite, which is lethal to these bacteria. An HPLC procedure was developed for the rapid analysis of chlorate (ClO₃ ^?), nitrate (NO₃ ^?), and nitrite (NO₂ ^?) ions in bovine ruminal fluid samples. Standard curves for chlorite, nitrite, nitrate, and chlorate were well defined linear curves with R² values of 0.99846, 0.99106, 0.99854, and 0.99138, respectively. Concentrations of chlorite could not be accurately determined in bovine ruminal fluid because chlorite reacts with or binds a component(s) or is reduced to chloride in bovine ruminal fluid resulting in low chlorite measurements. A standard curve ranging from 25 to 150 ppm ClO₃ ^? ion was used to measure chlorate fortified into ruminal fluid. The concentration of chlorate was more rapidly lowered (P < 0.01) under anaerobic compared to aerobic incubation conditions. Chlorate alone or chlorate supplemented with the reductants sodium lactate or glycerol were bactericidal in anaerobic incubations. In anaerobic culture, the addition of sodium formate to chlorate-fortified ruminal fluid appeared to decrease chlorate concentrations; however, formate also appeared to moderate the bactericidal effect of chlorate against E. coli. Addition of the reductants, glycerol or lactate, to chlorate-fortified ruminal fluid did not increase the killing of E. coli at 24 h, but may be useful when the reducing equivalents are limiting as in waste holding reservoirs or composting systems required for intense animal production.     

废弃油基钻井液热化学破乳-离心分离实验

废弃油基钻井液是一种含油量较高的油包水稳定体系,具有回收利用价值。采用热化学破乳-离心分离的方法,考察了破乳剂加量、破乳温度、离心机转速、破乳时间、离心时间和破乳剂浓度对废弃油基钻井液分离的影响。通过实验确定了破乳效果最好的破乳剂为巴斯夫L62,并对热化学破乳-离心分离废弃油基钻井液的影响因素进行了优化实验研究。实验结果表明,在破乳剂加量300 mg/L、离心机转速8 000 r/min、破乳温度80℃、破乳时间3 h、离心时间25 min和破乳剂质量浓度0.25%的条件下,热化学破乳-离心法处理废弃油基钻井液的脱水率达75%、脱油率达72.73%。热化学破乳-离心分离方法回收废弃油基钻井液中的油具有潜在的应用价值。