低温碱溶粉煤灰中硅和铝的溶出规律研究

采用低温碱溶法对粉煤灰中硅和铝(分别以氧化硅和氧化铝计)的溶出规律进行了研究,考察了粉煤灰热处理温度、碱浓度、溶出时间、溶出温度等因素对粉煤灰中硅和铝溶出量的影响.结果表明:在热处理温度为950℃,碱浓度为2～3 mol/L,溶出温度为120～130℃,溶出时间为4～6 h时,氧化硅的溶出量为29.23%,氧化铝的溶出量为1.26%,溶出比为23.63,可实现粉煤灰中硅和铝的分步溶出,并利用XRD对溶出结果进行了分析.      

废弃物焚烧飞灰中持久性自由基与二噁英及金属的关联探究

环境持久性自由基稳定性强,在二噁英生成反应中发现其存在.为了研究实际废弃物焚烧飞灰中持久性自由基的特性,对6个不同焚烧厂布袋飞灰分别进行了持久性自由基、二噁英以及金属检测,结果表明天津医疗废物焚烧飞灰、江西南昌生活垃圾焚烧飞灰和浙江兰溪生活垃圾焚烧产生的碳黑、炉渣都含有持久性自由基.其中天津样品信号最强,检测到羟基自由基、以碳原子为中心的自由基及半醌类自由基3种信号.对比各个样品的二噁英毒性当量(以I-TEQ计)发现,江西南昌飞灰样品的最高,高达7.229 4 ng·g~(-1),而自由基信号最强的天津样品的二噁英毒性当量却仅有0.092 8 ng·g~(-1),自由基信号强弱与二噁英含量并未表现出明显的数值关系.同时样品中持久性自由基自旋浓度随着金属质量分数比重的升高也呈现升高趋势,以Al、Fe、Zn变化情况最为明显,可见自由基信号强弱与金属存在一定的关联性.此外,Zn在天津样品中含量最高(0.813 7%),是其他样品的数倍,同时该样品含有较高浓度的以氧为中心的自由基,可以推测金属Zn对持久性自由基的形成影响较大,且易形成半衰期长的自由基类型.     

垃圾焚烧飞灰中重金属的分布规律及浸出特性

文章研究了上海某垃圾焚烧厂不同粒径飞灰中重金属的分布特性。结果表明,大部分飞灰聚集在38～280μm,其中在38～53μm飞灰约占总量的50%。飞灰中重金属在不同粒径中的含量分布规律均为:Pb>Zn>Cu>Cr>Cd>Ni;除Ni和Cr外,重金属Zn、Cd、Cu和Pb都普遍表现出向小颗粒富集的趋势。重金属在不同粒径中的浸出量均为:Pb>Zn>Cr>Ni>Cu>Cd;Cr、Ni、Cu和Cd的浸出量随飞灰粒径的减小呈增加趋势,而Zn在106～280μm和Pb在75～106μm处的浸出量都经历了一个陡增过程。不同重金属的主要化学形态各不相同,除Ni和Cr外,其它重金属的主要形态都呈不稳定性。随着飞灰粒径的减小,碳酸盐结合态的Cd、Pb、Zn、Cu和铁锰氧化物结合态的Pb、Zn、Cu的量逐渐增加;残留态的Zn和有机结合态的Cu则不增反减;Ni和Cr的各形态分布规律不明显。     

Dechlorination of polychlorinated biphenyls, dibenzo-p-dioxins and dibenzofurans on fly ash

Dechlorination of commercial mixtures of polychlorinated biphenyls (PCB) as well as polychlorinated dibenzo-p-dioxins (PCDD) and dibenzofurans (PCDF) on extracted and non-extracted fly ash obtained from municipal waste incinerator (MWI) was studied in closed systems under nitrogen atmosphere at temperatures of 260°C and 340°C. Decomposition results (given as the difference between PCB or PCDD/F molar amounts before and after the experiment (in %) due predominantly to dechlorination reactions) and detoxification data (expressed similarly but related to toxic PCB and PCDD/F congeners only and given in I-TEQ units) are reported. Detoxification of Delor 105/80T at 260°C and 340°C at a loading of 0.65 wt% was 99.48% and 100%, respectively. The decomposition of Delor 103 at 340°C and for the loading of 0.75 wt% corresponded to 99.99%. The detoxification capability of PCDD/Fs on extracted and non-extracted fly ash for loading of 130 and 264 ng/0.4 g of fly ash at 340°C made 96 and 98%, respectively.     

Detoxifying PCDD/Fs and heavy metals in fly ash from medical waste incinerators with a DC double arc plasma torch

Medical waste incinerator (MWI) fly ash is regarded as a highly toxic waste because it contains high concentrations of heavy metals anddioxins, including polychlorinateddibenzo-p-dioxins (PCDDs) and polychlorinateddibenzofurans (PCDFs). Therefore fly ash from MWI must be appropriately treated before beingdischarged into the environment. A melting process based on adirect current thermal plasma torch has beendeveloped to convert MWI fly ash into harmless slag. The leaching characteristics of heavy metals in fly ash and vitrified slag were investigated using the toxicity characteristic leaching procedure, while the content of PCDD/Fs in the fly ashes and slags was measured using method 1613 of the US EPA. The experimental results show that thedecomposition rate of PCDD/Fs is over 99% in toxic equivalent quantity value and the leaching of heavy metals in the slag significantlydecreases after the plasma melting process. The produced slag has a compact and homogeneous microstructure withdensity of up to2.8 g/cm3 .     

煤灰渣利用中对人群所产生辐射影响的评价

煤的开发与利用产生了大量的灰，渣等固体废物，占用大量土地，污染土壤和水源，成为四大公害之一，因而对煤灰，渣的治理和综合利用一直受到人们的关注。然而，由于煤灰渣中的天然放射性水平较高，因此，在煤灰渣的综合利用，尤其在用作建筑材料时，不可避免地要受到其放射性核素的危害。本文在对四川省各燃煤电厂排放灰渣中的^238U,^232Th,^220R,^40X并无然放射性核素进行分析和研究的基础上，用UNSCEAR1982年报告所推荐的计算模式估算了各电厂煤灰渣制度建材对公众所产生的附加辐射剂量，评价了煤灰制度建材对环境和人群所产生的辐射影响，并提出了控制煤灰渣在建材中的最大掺合量，为其它作用的使用煤灰渣提出了科学的理论依据。     

Metallic-phase lead in slag of municipal solid waste incineration ash and leaching characteristics

Metallic phases in slags and their influence on the leaching characteristics were investigated. The proportions of metallic phase in four slags were 0.028%, 0.24%, 1.87%, and 3.05% by weight. The lead content was 10–248 mg/kg in bulk slag after metal removal, while in the metallic phase it was 579–7390 mg/kg. Lead concentrations in the metallic phase were more than ten times higher than in slags after metal removal. Lead was distributed in the metallic phase at 2.0%, 8.3%, 10.3%, and 47.4%. The concentrations of all metallic elements in metallic phases were much higher than in bulk slag. Iron, copper, and nickel had accumulated in magnetic metals, while aluminum and zinc were found in nonmagnetic metals. As regards chromium, manganese, lead, and tin, the proportion of metallic phases depended on the slag samples. By removing metallic phases, both water and pH 4 leachable lead decreased. The basic principles of melting residues containing lead are the separation of lead as a metal in reductive melting, and the containment of lead ions into uniform glassy particles in oxidization melting. Melting slag can be seen to contribute to environmental preservation by facilitating the recycling of materials through the separation of metals from melting slag. Received: February 21, 2000 / Accepted: July 27, 2000     

湿法预处理对垃圾焚烧飞灰中重金属的形态及风险影响研究

以某典型城市生活垃圾焚烧飞灰为研究对象,采用X射线荧光光谱仪（XRF）、X射线衍射仪（XRD）和电感耦合等离子体光谱仪（ICP）测定了焚烧飞灰的主要成分、矿物学组成和重金属含量,探讨了湿法预处理工艺对飞灰的化学组成、矿物学形态、化学形态及风险水平的影响.结果表明,飞灰的主要化学组成为O、Ca、Cl、Na、K等,占飞灰总质量的93.54％,其次含有0.04％ ～0.68％的Zn、Pb、Cu、Cr等微量重金属元素;经过湿法预处理,飞灰中可溶性氯盐具有较好的去除效果,且几乎所有重金属元素的不稳定形态（弱酸提取态和可还原态）比例都有一定程度的减少,有效降低了重金属的毒性、生物有效性及环境风险水平.本研究有助于降低焚烧飞灰的环境风险和探寻其资源化的有效途径.     

Stability of a Coal Waste Artificial Reef

The feasibility of using U.K. coal-fired power station waste materials for artificial reef production is being examined. in June, 1989, an experimental artificial reef was constructed in Poole Bay, off the central south coast of the U.K., using three different mixtures of pulverised fuel ash (PFA), flue gas desulphurisation (FGD) gypsum and slurry, stabilized with cement and formed into blocks. Fifty tonnes of 40 × 20 × 20 cm blocks were formed into eight conical reef units replicating three different PFA/gypsum mixtures and one concrete control. the reef structure is 10m below chart datum on a flat sandy sea-bed.

Combustion of coal concentrates the heavy metal content in the resultant ash. the purpose of stabilization of the ash as blocks is twofold: to immobilize heavy metals (or other components) and to provide hard substratum for the attachment of organisms. to examine the effectiveness of this stabilization and hence the environmental compatibility of the block materials, heavy metal (Cd, Cr, Cu, Pb, Mn, Ni, Zn) content of the blocks has been monitored routinely over two years, to determine leaching rates. Sectional profiles indicate partial replacement of calcium content by magnesium. Associated with this there has also been some redistribution of heavy metals. Only in the case of cadmium has there been a detectable loss from the surface of blocks. Chromium and manganese concentrations appear to have increased. the metal content of the reef epibiota (including ascidians, Ascidia mentula; hydroids, Halecium spp.; bryozoans, Bugula spp. and red algae) growing on the ash blocks has been compared to that of epibiota attached to the concrete controls and surrounding sea-bed. to date no evidence of excess bioaccumulation of metals has been detected.

The physical integrity of the ash reef blocks has been maintained. There is evidence that the blocks are increasing in compressive strength.

An indication of the fishery enhancement potential of the experimental structure is given by the presence of eight commercially fished species (crustaceans and molluscs) including lobsters (Homarus gammarus).