垃圾焚烧飞灰中二噁英类的研究概况

随着垃圾焚烧技术的推广应用,焚烧产生的污染越来越受关注,本文介绍了二噁英的检测方法、垃圾焚烧飞灰中二噁英的分布、影响因素及飞灰的处置和综合利用技术研究概况。     

Mitigation effects of silicon rich amendments on heavy metal accumulation in rice (Oryza sativa L.) planted on multi-metal contaminated acidic soil

The mechanisms of stabilization by silicon-rich amendments of cadmium, zinc, copper and lead in a multi-metal contaminated acidic soil and the mitigation of metal accumulation in rice were investigated in this study. The results from a pot experiment indicated that the application of fly ash (20 and 40 g kg⁻¹) and steel slag (3 and 6 g kg⁻¹) increased soil pH from 4.0 to 5.0-6.4, decreased the phytoavailability of heavy metals by at least 60%, and further suppressed metal uptake by rice. Diffusion gradient in thin-film measurement showed the heavy metal diffusion fluxes from soil to solution decreased by greater than 84% after remediation. X-ray diffraction analysis indicated the mobile metals were mainly deposited as their silicates, phosphates and hydroxides in amended treatments. Moreover, it was found metal translocation from stem to leaf was dramatically restrained by adding amendments, which might be due to the increase of silicon concentration and co-precipitation with heavy metals in stem. Finally, a field experiment showed the trace element concentrations in polished rice treated with amendments complied with the food safety standards of China. These results demonstrated fly ash and steel slag could be effective in mitigating heavy metal accumulation in rice grown on multi-metal contaminated acidic soils.     

受污染底泥固化/稳定化处理及营养物质释放特征研究

以广州市车陂涌受污染底泥为研究对象,通过掺杂不同比例的粉煤灰、水泥、石灰和膨润土,对底泥进行固化/稳定化处理试验,探讨底泥经处理后的产物中碳素和营养盐的释放特征。结果表明：实验条件下底泥固化/稳定化处理基本不会减少碳的释放,但会改变其释放形态,未经处理的底泥释放的TOC被迅速矿化,而底泥固化/稳定化处理产物释放的TOC稳定存在。在试验期内,底泥固化/稳定化处理对产物的硝态氮释放无明显影响;固化/稳定化处理能有效促进氮磷的稳定,固化体氨氮和磷酸盐的释放量明显降低,分别比未经处理的底泥减少了67.4%和76.4%以上。不同来源的粉煤灰由于成分不同,在底泥固化/稳定化处理中的作用存在差异,掺杂珠江电厂的粉煤灰Z对氨氮和磷酸盐的稳定化效果优于恒运电厂的粉煤灰H。固化/稳定化技术为疏浚底泥提供了一种安全的处理方法,为粉煤灰提供了一种有效的资源化途径。     

污泥焚烧残渣水热合成NaPl型沸石和水钙沸石的性质研究

本文以污泥焚烧残渣为原料,以传统水热合成方法制得NaPl型沸石和水钙沸石,并对其相关指标进行表征．经x射线衍射、扫描电镜和红外光谱测定表明,制得的产物为无其它杂晶生成的NaPl型沸石和水钙沸石,且具有放射束片状晶体形貌和沸石骨架结构．与原污泥焚烧残渣相比,合成沸石的比表面积和阳离子交换容量提高了47倍、17倍,分别达到...     

采用烧结法降低垃圾焚烧飞灰浸出毒性的研究

采用电感耦合等离子体发射光谱仪（ICP-AES）对垃圾焚烧飞灰和造粒烧结后试样中重金属的浸出量进行分析.研究表明,随着烧结时间的增加和烧结温度的提高,大多数重金属浸出毒性都有所降低.对造粒后的飞灰物料进行低温烧结处理,烧结工艺参数可初步定为造粒直径为15mm,烧结温度为950℃-1100℃,烧结时间约为20min.     

陡电干除灰设备治理和改进

针对陡河发电厂干除灰系统易出现内管脱落、磨损及逆止阀密封不严等问题系统地进行了分析,对频发缺陷进行了治理和改进,确保干除灰系统安全运行。     

An LCA model for waste incineration enhanced with new technologies for metal recovery and application to the case of Switzerland

A process model of municipal solid waste incinerators (MSWIs) and new technologies for metal recovery from combustion residues was developed. The environmental impact is modeled as a function of waste composition as well as waste treatment and material recovery technologies. The model includes combustion with a grate incinerator, several flue gas treatment technologies, electricity and steam production from waste heat recovery, metal recovery from slag and fly ash, and landfilling of residues and can be tailored to specific plants and sites (software tools can be downloaded free of charge). Application of the model to Switzerland shows that the treatment of one tonne of municipal solid waste results on average in 425 kg CO₂-eq. generated in the incineration process, and 54 kg CO₂-eq. accrue in upstream processes such as waste transport and the production of operating materials. Downstream processes, i.e. residue disposal, generates 5 kg CO₂-eq. Savings from energy recovery are in the range of 67 to 752 kg CO₂-eq. depending on the assumptions regarding the substituted energy production, while the recovery of metals from slag and fly ash currently results in a net saving of approximately 35 kg CO₂-eq. A similar impact pattern is observed when assessing the MSWI model for aggregated environmental impacts (ReCiPe) and for non-renewable resource consumption (cumulative exergy demand), except that direct emissions have less and no relevance, respectively, on the total score. The study illustrates that MSWI plants can be an important element of industrial ecology as they provide waste disposal services and can help to close material and energetic cycles.     

Novel approach to control adsorbent aggregation: iron fixed bentonite-fly ash for Lead (Pb) and Cadmium (Cd) removal from aqueous media

In the present study, a novel approach was used to control zero valent iron aggregation and separation problems by fixing zero valent iron (ZVI) on bentonite-fly ash pellets. For this purpose, porous low cost bentonite-fly ash (BFA) pellets with size of 2.00 cm in length and 0.35 cm in diameter were prepared and fixed with ZVI to manufacture zero valent iron bentonite-fly ash (ZVI-BFA) pellets. Importantly, unlike powdered adsorbents, ZVI-BFA can easily be separated from final effluents when exhausted without any disintegration. The performance of the developed novel adsorbent was investigated for the removal of Pb²⁺ and Cd²⁺ from aqueous media. At 100 mg·L^–1 and 1 g adsorbent, a maximum of 89.5% of Cd²⁺ and 95.6% of Pb²⁺ was removed by ZVI-BFA as compared to 56% and 95% removal by BFA. At 200 mg·L^–1, Cd²⁺ and Pb²⁺ removal by ZVI-BFA was 56% and 99.8% respectively as compared to only 28% and 96% by BFA. Further, the removal kinetics was best fitted for pseudo-second order model. The study provides the basis for improving the removal capacity of porous materials by iron fixation while taking separation ability into consideration.

Open image in new window

     

调质对垃圾焚烧飞灰烧结处理的影响

为提高经磷酸预处理后的焚烧飞灰在烧结处理过程中的烧结体机械强度,研究了添加SiO2或粉煤灰进行调质,其添加比例对烧结温度和烧结体性能的影响。同时进一步研究了利用硼酸钠作为助熔剂对焚烧飞灰烧结试验影响。结果表明,在烧结温度为1 150℃时,添加30%或者更低比例的SiO₂,或添加20%比例的粉煤灰,焚烧飞灰烧结体已经具有足够的抗压强度和致密化程度。添加5%的硼酸钠时,坯体烧结温度在1 050℃,而添加10%的硼酸钠时烧结温度可降低至980℃。     

Long-term study of palladium in road tunnel dust and sewage sludge ash

The present work summarizes data about palladium contents of road tunnel dust from 1994 to 2007 and sewage sludge ash from 1972 to 2006. Since palladium is emitted from automotive catalytic converters as elemental particles, road dust is quiet useful to study traffic-related Pd emissions. Very high Pd values of up to 516 μg Pd kg⁻¹ were found in the road dust samples collected in 2007. Heavy metals of all urban emissions, also dental practice effluent, are enriched in sewage sludge ash and thus this matrix is useful for the documentation of palladium emission caused by the use of Pd alloys in dental medicine. In sewage sludge ash highest Pd contents of maximum 460 μg Pd kg⁻¹ were found in the years 1986-1997. In both matrices correlations of Pd content to Pd demand of industry are discussed.