特殊地形地貌区燃煤电厂灰场防渗对策

结合环评实例,介绍了位于特殊地形地貌区燃煤电厂灰场的防渗对策,主要包括位于风化灰岩区、喀斯特地貌区和湿陷性黄土区灰场的防渗措施,从而为特殊地貌区灰场周边水资源保护提供借鉴。     

Water extraction with CO2 bubbling as pretreatment of melting-furnace fly ash for metal recovery

In Japan, melting-furnace fly ash (MFA) generated from ash melting and gasification/melting plants is considered an “urban mine” due to its high metal content. This study aimed to develop a novel approach to pretreating MFA for metal recovery. Water extraction with CO₂ bubbling was investigated because MFA mainly consists of water-soluble salts containing elements such as Cl, Ca, Na, and K. Instead of acid addition, CO₂ bubbling was applied to maintain the optimal pH for minimizing the release of target metal elements and maximizing the removal of undesirable elements during water extraction. The results revealed that CO₂ bubbling effectively decreased the release of Pb, Zn, and Cd into the treatment water. This was mainly due to coprecipitation with CaCO₃, which was primarily formed by the reaction of Ca²⁺ from the MFA with CO₃ ²⁻ from the CO₂ gas. The bubbling process also helped accelerate the removal of Cl from MFA. Furthermore, the study showed that it is possible to lower the water-to-solid ratio to 5 with only a slight reduction in water extraction effect. Finally, approximately four times the concentration of target metals (rare metals and Cu, Pb, and Zn) was achieved by removing 90% of Cl, 70%–90% of Na and K, and 30%–40% of Ca through water extraction with CO₂ bubbling, resulting in a concentration of target metals that was nearly equal to that of ore.     

Effects of water washing on removing organic residues in bottom ashes of municipal solid waste incinerators

Due to their potential toxicity and odourous nature, the residual organics in municipal solid waste incinerators are recently gaining attention as an important issue of resources recovery apart from their complex mixture of organic counterpart. Studies of the organic fractions in municipal solid waste incinerator residues have been limited. In this study, extended solid-phase extraction of the water-washed bottom ash and liquid-phase extraction of the washing water were carried out with regard to bottom ash samples from three mass-burning incinerators in Taipei County (Taiwan) during four consecutive seasons of year 2008-2009. Supercritical fluid extraction and Soxtec extraction techniques along with GC-MS were successfully used to characterize the residual organics in weathered and washed bottom ashes. Supercritical fluid extraction provided the quantification of aliphatics and aromatic compounds such as hexanoic acid and benzaldehyde, respectively. Soxtec extraction was useful for qualitative analysis of aromatic and aliphatic groups in the ashes and many of which were odourous and toxic compounds. By mixing one unit weight (g) bottom ash with two unit volume (mL) water for 15 min, total organic carbon in the bottom ash was greatly reduced (e.g., from 4.1 to 1.8 wt.%). Among the removed were foul odour-causing compounds such as pyridine and quinoline derivatives, while some aromatic compounds such as 4-hydroxybenzaldehyde and low-molecular-weight aliphatics such as hexanoic acid remained. The results here suggest that washing with water can be an effective pre-treatment step for removing odour-causing and environmental concerned organics.     

Fly and bottom ashes from biomass combustion as cement replacing components in mortars production: Rheological behaviour of the pastes and materials compression strength

In the present research mortar pastes obtained by replacing a commercial cement with the equivalent mass of 5, 10, 20 and 30 wt.% of fly ash or bottom ash from fir chips combustion, were prepared and rheologically characterized. It was observed that the presence of ash modifies their rheological behaviour with respect to the reference blend due to the presence, in the ashes, of KCl and K₂SO₄ which cause precipitation of gypsum and portlandite during the first hydration stages of the pastes. Hydrated materials containing 5 wt.% of ash display compression strength and absorption at 28 d of same magnitude as the reference composition; conversely, progressive increase of ash cause a continuous decline of materials performances. Conversely, samples tested after 180 d display a marked decline of compression strength, as a consequence of potassium elution and consequent alkali-silica reaction against materials under curing.     

Environmental risks of farmed and barren alkaline coal ash landfills in Tuzla, Bosnia and Herzegovina

The disposal of coal combustion residues (CCR) has led to a significant consumption of land in the West Balkan region. In Tuzla (Bosnia and Herzegovina) we studied previously soil-covered (farmed) and barren CCR landfills including management practises, field ageing of CCR and the transfer of trace elements into crops, wild plants and wastewaters. Soil tillage resulted in mixing of cover soil with CCR. Medicago sativa showed very low Cu:Mo ratios (1.25) which may cause hypocuprosis in ruminants. Total loads of inorganic pollutants in the CCR transport water, but not pH ( approximately 12), were below regulatory limits of most EU countries. Arsenic concentrations in CCR transport water were <2microgl(-1) whereas reductive conditions in an abandoned landfill significantly enhanced concentrations in leachates (44microgl(-1)). The opposite pattern was found for Cr likely due to large initial leaching of CrVI. Public use of landfills, including farming, should be based on a prior risk assessment due to the heterogeneity of CCR.     

Polycyclic aromatic hydrocarbons in ash: determination of total and leachable concentrations

Before wood ash can be used as a soil fertilizer, concentrations of environmentally hazardous compounds must be investigated. In this study, total and leachable concentrations of 16 polycyclic aromatic hydrocarbons (PAHs) were determined in four ash samples and one green liquor sludge. The ash sample with the highest carbon content also contained high levels of PAHs; three of the ash samples had total concentrations exceeding the limit permitted by the Swedish Forest Agency for recycling to forest soils. The leachable concentrations were higher for the non-stabilized samples; this was probably due to colloid-facilitated transport of the contaminants in these samples. However, the leachable concentrations were overall relatively low in all the samples studied. The amounts of PAHs introduced to forest soils by additions of stabilized, recyclable ash products will be determined primarily by the rate of weathering of the ash particles and the total concentration of contaminants.     

流化床飞灰固化焚烧飞灰效果及微观分析

以深圳某垃圾焚烧厂焚烧飞灰为例分析了焚烧飞灰的性质和重金属毒性.结果表明,飞灰中 Pb 和 Cr 超出TCLP 阈值,必须进行稳定化处理.以流化床飞灰为主要成分配制固化材料,按不同比例掺人焚烧l￡灰进行固化实验,结果表明,实验范围内重金属固定效果良好.微观测试显示,固化过程主要产物有水化硅酸钙凝胶、钙矾石等,通过物理包胶、物理吸附、复分解沉淀反应和同晶替代等作用抑制重金属浸出.     

SGA对垃圾焚烧飞灰中重金属的固化性能研究简

根据EPA 1311、HJ/T 299-2007、HJ/T 300-2007和HJ 557-2009等国内外不同标准,研究了深圳某垃圾焚烧发电厂垃圾焚烧飞灰的浸出毒性,探讨了六硫代胍基甲酸（sixthio guanidine acid,SGA）、二甲基二硫代氨基甲酸盐（sodium dimethyl dithio carbamate,SDD）和Ca（OH）₂浓度对垃圾焚烧飞灰中重金属的固定性能的影响。研究结果表明,随着浸提液pH的降低,该厂焚烧飞灰中大部分金属元素的浸出量增大,焚烧飞灰浸出液中的Cd、Ni、Pb和Zn浓度分别超过国家危险废物鉴别标准（GB5085.3-2007）规定值的4.75倍、1.47倍、6.72倍和2.20倍,属于危险废弃物,必须进行稳定化处理。当固化剂SGA加入量为0.1 mol/kg时,稳定化后的重金属浸出浓度已经低于危险废物鉴别标准,且对Cd、Cr、Cu和Pb的固化性能优于SDD和Ca（OH）₂;当固化剂SGA、SDD和Ca（OH）₂加入量为0.5 mol/kg时,稳定化后的焚烧飞灰重金属浸出浓度均低于国家危险废物鉴别标准（GB 5085.3-2007）中的规定值。与SDD和Ca（OH）₂相比,SGA对垃圾焚烧飞灰中重金属的固化处理更具有优势。     

锡冶炼含砷烟尘低温陶瓷固化技术

以锡冶炼过程中排放的含砷烟尘为研究对象,对浸出特性和低温陶瓷胶凝材料对其的固化效果进行了研究。结果表明,含砷烟尘As、Cu和Zn毒性浸出浓度分别为6 783、167和224 mg/L,严重超过国家毒性浸出鉴别标准值。其经低温陶瓷胶凝材料固化处理,当含砷烟尘掺量小于40%,自然养护3 d,As、Cu和Zn毒性浸出浓度急剧降低,且低于国家标准值。XRD和SEM分析表明,低温陶瓷胶凝材料在复合化学激发剂作用下,反应生成类沸石水化铝硅酸盐矿物(Al-O-Si);固化体中Ca-Fe-As-O盐是As固化的主要矿物相。Cu2+、Zn2+替换铝硅酸盐聚合物结构中的Na+、K+保持平衡电荷。胶凝材料水化产物填充于材料颗粒间,使其连接成一致密整体,有效降低了有害物质的毒性浸出浓度。