城市生活垃圾焚烧飞灰熔融处理的进展

针对城市生活垃圾焚烧产生飞灰的处理以及由此引发的二次污染问题,阐述了飞灰的污染特性,讨论了各种飞灰处理技术的优缺点,分析了熔融处理技术在降低飞灰中重金属浸出毒性和彻底分解其中的二恶英所具有的优越性,为飞灰的无害化和资源化处理提供参考。     

O_3-脱硫灰-FeCl_3联合调理对污泥脱水性能的影响

以毛细吸水时间(CST)和滤饼含水率(Wc)为指标,探究O_3-脱硫灰-FeCl3联合调理对污泥脱水性能的影响。通过测定污泥各层胞外聚合物(EPS)含量、可溶性化学需氧量(SCOD)、Zeta电位以及红外光谱(FTIR),探讨了O_3、脱硫灰和FeCl_3调理污泥的作用机理。结果表明:O3-脱硫灰-FeCl_3联合调理污泥的效果明显好于O_3单独调理。SCOD和FTIR分析表明:部分EPS氧化分解为氨基酸、脂肪酸等小分子有机物或无机物,释放了部分表面吸附水和内部结合水。O_3能促进紧密粘附的胞外聚合物(TB-EPS)剥落;剥落的TB-EPS,部分转化为溶解性胞外聚合物(S-EPS)和松散粘附层胞外聚合物(LB-EPS),部分被Fe(OH)_3吸附。当O_3、脱硫灰和FeCl3投加量分别为85.72mg/g(DS)、400mg/g(DS)和60mg/g(DS)时,CST和Wc分别由1239.5s和83.69%降至204.3s和70.70%,脱水速度提高83.52%,脱水程度提高15.41%。     

核级高效空气过滤器的结构与阻力关系探讨

探讨了核级高效空气过滤器的结构形式与过滤阻力之间的关系.分别采用进口的和国产的过滤材料,制作了一批不同褶间距(2.5～8.2mm)、褶深(33～275 mm)和褶形状的高效空气过滤器,并对其过滤阻力进行了测试,研究了高效空气过滤器的结构与阻力之间的关系.实验结果表明,对于进口过滤材料.当褶深为33 mm、52 mm和73 mm时,过滤阻力最低时相应的褶间距分别为2.7 mm、3.4 mm和4.0 mm;对于国产过滤材料,当褶深为33 mm、52 mm、73 mm、105 mm和245 mm时,过滤阻力最低时,相应的褶间距分别为2.5 mm,3.1 mm、3.7 mm、4.8 mm和5.4 mm.因此,不同的过滤材料.应该有不同的过滤器最佳结构参数.此外,V形过滤材料褶过滤器比矩形过滤材料褶过滤器的阻力低.     

臭氧+曝气生物滤池深度处理工艺试验研究

针对某污水厂出水不达标的情况,本研究采用臭氧(O3)和曝气生物滤池(BAF)组合工艺对其进行深度处理.结果表明,当采用两级臭氧+曝气生物滤池工艺时,出水COD在31～46 mg/L,色度在13～29倍,均达到一级A排放标准.在最佳运行条件下,臭氧氧化使相对分子质量大于50 000的有机物含量减少10％,小于1 000的有机物含量增加14％.曝气生物滤池工艺使相对分子质量小于1 000的有机物含量降低了24％.     

垃圾焚烧灰性质分析及控制方法

随着焚烧技术在垃圾处理方式中普遍采用,焚烧产生的灰渣数量也日益增加。灰渣与飞灰中有毒的重金属及有机物质会污染土壤与地下水,对人类健康造成极大的影响。本文对各类垃圾焚烧灰渣的物理化学性质及重金属浸出特性进行了详细的阐述,介绍了灰渣的毒性分析与控制方法。通过分析可知:为了避免灰渣二次污染应该重点控制铬、镉、铍、铅等重金属和二恶英、呋喃等有机物的污染;处置后的灰渣有害离子浸出能力降低,根据灰渣物理和工程性质,可以成为再生资源充当填充材料和混凝土与沥青路面骨料等。     

基于遗传算法进行EMI滤波器电感的设计

通过电感的高频特性及其对共模插入损耗的影响分析,采用遗传算法和Ngspice仿真库设计出电感的选择方案,最后通过电路仿真和实验同时验证方案的有效性。该方案避免了对EMI滤波器高频段的复杂建模,降低了电感选择的难度,对电感元件的选择具有一定的指导意义。     

含硝基苯、苯胺废水处理的工程实践

采用固定化微生物-曝气生物滤池与铁-炭微电解法联用的工艺方法处理含硝基苯、苯胺的废水。通过培养驯化微生物阶段、半负荷进水阶段、满负荷进水阶段的调试运行,表明:当进水CODCr<1 000mg/L、硝基苯<120mg/L、苯胺<30mg/L时,出水可达到CODCr<300mg/L、硝基苯<5mg/L、苯胺<5mg/L的设计要求。铁-炭微电解法在pH值为3～4时,对废水有一定的脱色作用,但pH值升高后脱色效果不明显。     

Removal and transformation of organic matters in domestic wastewater during lab-scale chemically enhanced primary treatment and a trickling filter treatment

To find a simple and economical way for treating the domestic wastewater in small counties and towns, a process combining chemically enhanced primary treatment and a trickling filter (CEPT-TF, representing the physical and biological effects) was constructed and operated in laboratory conditions. The characteristic behaviors of dissolved organic matter in raw wastewater and effluents were examined during steady-state operation. Experimental results showed that the process of CEPT and TF in series was beneficial for the removal of hydrophobic and hydrophilic organics. Specially, the hydrophobic and aromatic materials could be preferentially removed in the CEPT unit, and the hydrophilic fraction in the TF. Structural changes of the organic fractions during the operation of the different units were also characterized via spectrum analysis.     

石英砂表面活性滤膜去除地下水中氨氮的试验研究

为研究石英砂滤料表面活性滤膜催化氧化地下水中氨氮的性能,采用已运行4年的中试石英砂滤柱,改变进水氨氮负荷并且长期持续过滤仅含氨氮的进水,考察该滤膜催化氧化氨氮的性能.结果表明:在进水氨氮浓度为0.8~1.3mg/L,水温为20~23℃,滤速为7m/h的试验条件下,滤料表面活性滤膜催化氧化氨氮的性能可长期保持稳定、高效;在溶解氧(DO)充足的条件下,氨氮的最大去除负荷为22.3g/(m³·h),且其与氨氮进水负荷正相关;氨氮的极限去除浓度受溶解氧的限制,且当DO不足时,滤速对溶解氧的消耗影响较大.     

Influence of pore structure on biologically activated carbon performance and biofilm microbial characteristics

• Pore structure affects biologically activated carbon performance. • Pore structure determines organic matter (OM) removal mechanism. • Microbial community structure is related to pore structure and OM removal. Optimizing the characteristics of granular activated carbon (GAC) can improve the performance of biologically activated carbon (BAC) filters, and iodine value has always been the principal index for GAC selection. However, in this study, among three types of GAC treating the same humic acid-contaminated water, one had an iodine value 35% lower than the other two, but the dissolved organic carbon removal efficiency of its BAC was less than 5% away from the others. Iodine value was found to influence the removal of different organic fractions instead of the total removal efficiency. Based on the removal and biological characteristics, two possible mechanisms of organic matter removal during steady-state were suggested. For GAC with poor micropore volume and iodine value, high molecular weight substances (3500–9000 Da) were removed mainly through degradation by microorganisms, and the biodegraded organics (soluble microbial by-products,<3500 Da) were released because of the low adsorption capacity of activated carbon. For GAC with higher micropore volume and iodine value, organics with low molecular weight (<3500 Da) were more easily removed, first being adsorbed by micropores and then biodegraded by the biofilm. The biomass was determined by the pore volume with pore diameters greater than 100 μm, but did not correspond to the removal efficiency. Nevertheless, the microbial community structure was coordinate with both the pore structure and the organic removal characteristics. The findings provide a theoretical basis for selecting GAC for the BAC process based on its pore structure.