Disparity of a Seat Cushion and Its Influence on Postural Control

Properties of supporting surfaces of a seat have an influence on postural control. Centre of pressure (COP) displacement parameters reflect both the balance controlling process and movements of the centre of a mass of entire body. The subjects of the study were 9 healthy men. A seat cushion was examined with a 2-force platform setup. Force exertion at a seat pan and feet and COP displacement at a seat pan were measured to analyse postural control. Analysis of variance determined the differences in postural control depending on a cushion type among the subjects. Significant differences in COP displacement parameters were in COP trajectory length, medio-lateral COP displacement and COP velocity. The results of the study showed that foam cushion ensures better postural control.     

Electrochemical remediation of copper (II) from an industrial effluent Part II: three-dimensional foam electrodes

A batch recycle removal of copper ions from an industrial effluent by means of copper foam cathodes was tested. A constant current of 750 A was applied to the cell in order to perform the reduction. Copper depletion was investigated at different solution flow rates and a removal greater than 98% was obtained with a flow rate of 1000 l/h. The influence of initial metal concentration on copper deposition and current efficiency is also discussed.     

二氧化碳灭火系统扑灭风电机组舱内火灾试验研究

为有效遏制全国多地风力发电机组火灾事故的势头,基于灭火系统在风电机组防火设计中的重要性,提出采用二氧化碳灭火系统对风电机舱进行灭火保护的解决方案。在建造国内首台风电机组火灾模拟试验装置的基础上,通过试验研究二氧化碳灭火系统在常温状态和低温状态下对风电机组火灾的灭火能力。结果表明,该灭火系统能够对风力发电机组进行全淹没灭火保护,适用于空间狭小且结构复杂的风电机舱;在低温条件下,其喷放时间和灭火时间虽比常温状态下长,但灭火效能并未降低。     

Inhibition effects of aluminum dust explosions by various kinds of ammonium polyphosphate

In this work, vinyltriethoxysilane (A151) and 3-aminopropyltriethoxysilane (KH550) were used to modify ammonium polyphosphate (APP), showing that the dispersibility of APP could be improved remarkably by A151 and KH550. The maximum explosion pressure of aluminum dust explosion decreased with the addition of APP, A151-APP (APP-A) and KH550-APP (APP-B), with the exception of the case where the inerting ratio (α) of APP-A was less than 0.4. After the addition of APP-B, there was little difference in flame propagation behavior and explosion pressure compared with that of adding APP, indicating that APP-B could retain the inhibition performance of APP compared with APP-A. When the inerting ratios of APP, APP-A and APP-B were 1.2, 1.4 and 1.4, respectively, the aluminum dust explosion could be completely inhibited. The explosion residues of aluminum dust/APP mainly consisted of Al₂O₃, P-containing and N-containing compounds. It could be analyzed that APP exerted the inhibition effect through both chemical and physical effects.     

Experimental and theoretical research on the inhibition performance of ethanol gasoline/air explosion by C6F12O

The safety issue of ethanol gasoline and the methods to control or weaken its explosion have attracted attention. To clarify the effect of C₆F₁₂O (perfluoro(2-methyl-3-pentanone)) on the explosion of ethanol gasoline-air mixtures and intrinsic mechanism, the explosion overpressure and flame propagation behavior under different equivalence ratios (φ = 0.6–0.8) and C₆F₁₂O concentrations (χ_inh = 0–4.0%) were experimentally obtained. The detailed inhibitor reaction process was also obtained by CHEMKIN based on a new assembly kinetic mechanism. The results show that the effects of C₆F₁₂O on the explosion characteristics of ethanol gasoline varied with χ_inh and φ. For rich flames, C₆F₁₂O is more effective than and heptafluoropropane (C₃HF₇) and nitrogen (N₂) in suppressing explosions; for lean and equivalence ratio flames, the addition of C₆F₁₂O may result in more severe explosions. The decrease in chemical reactivity is mainly because the mole fractions of OH and H radicals and the proportion of paths H radicals involved decrease after adding C₆F₁₂O, and R1500: CF₃COF + H = CF₃CO + HF, R965: CF₂:O + H = CF:O + HF, R863: CF₃ + H = CF₂ + HF are main suppressing reactions.     

压缩空气泡沫在长距离管路输送中压降的数值模拟

基于Fluent对压缩空气泡沫在长距离管道中的流动特性进行了数值模拟研究,将压缩空气泡沫近似为弥散流,采用Saplart-Allmaras模型模拟了不同管径下压缩空气泡沫以及不同泡沫原液浓度的AFFF泡沫在长距离管道内的流动及压降变化。模拟结果表明,随着距离变化,各管径管道内压降均呈现线性变化,且随着压缩空气泡沫的流动,压降线性增大。管道管径对管内压降变化具有显著影响,管道直径越小,管道内压降越大;泡沫原液浓度对压降的影响较小,且压缩空气泡沫在长距离输送中的压力随距离线性衰减。将模拟结果与长距离输送的试验结果进行了对比,误差在10%以内。     

新型钢渣水处理剂去除水体污染物的研究现状

钢渣是炼钢生产过程中产生的固体废弃物,具有较高的碱度、机械强度和比表面积。钢渣化学成份较复杂,直接排放会对环境造成严重的污染,加强钢渣的处置及综合利用具有重大意义。作为一种新型的水处理剂,钢渣用于去除水体污染物不仅减少了水体、土壤等生态环境的污染,而且达到了以废治废的目的。文章分析了钢渣水处理剂去除水体污染物的作用机理,认为钢渣水处理剂对水体中污染物的去除主要通过吸附和沉淀两种作用,而还原作用和离子交换作用相对较小。阐述了钢渣水处理剂处理重金属废水、有机废水和无机废水的研究现状,提出了在开发液态钢渣新型处理工艺的基础上,实现钢渣水处理剂的应用。     

改进测定水中氨氮分子吸收光谱法的试验研究

水中氨氮含量是反应水质状况的重要指标。文章对测定水中氨氮气相分子吸收光谱法(标准号HJ/T195-2005)进行了改进试验研究。第一,对氧化剂的配比进行了改进,使氨氮的测定范围扩展至100μg。第二,对标准HJ/T195-2005中直接使用亚硝酸钠标准溶液做标准曲线的处理方式也做了探讨。通过一系列对比实验认为,应用硫酸铵标准溶液做工作曲线更加准确合理。最后应用改进后的气相分子吸收光谱法和纳氏比色法或滴定法对多种实际废水样品进行同时测定。结果表明,改进后的气相分子吸收光谱法测定氨氮的范围更宽,灵敏度更高和准确度更好。     

外浮顶储罐泡沫灭火设施的选型

分析了外浮顶储罐火灾危险性及火灾类型,对目前泡沫灭火设施在外浮顶储罐中的应用及存在的问题进行阐述,建议外浮顶储罐的泡沫灭火设施采用边缘泡沫消防系统.     

磷酸铵盐亚纳米粉体灭火性能实验研究

使用溶剂-非溶剂法制备了粒径达到亚纳米量级（300nm-500mm）的磷酸铵盐灭火剂,建立了1．2m×1．2m×1．2m的小尺度灭火实验平台,开展了灭油池火和木垛火的全淹没灭火实验,对磷酸铵盐亚纳米粉体的灭火性能进行了研究,并与普通磷酸铵盐粉体的灭火性能进行了比较。实验结果显示磷酸铵盐亚纳米粉体的灭火性能要明显高于普通粉体,并且在低压下就可以获得很好的灭火果。工作压力的增加会缩短粉体的灭火时间,但是对于磷酸铵盐亚纳米粉体灭木垛火的情况,由于灭火时间相差示大,反而会导致灭火剂用量增加。