金属系无机抗菌材料研究进展

主要介绍金属系无机抗菌材料。从材料的选择和合成方面,讨论了材料的特性和抗菌功能相结合的途径,归纳出抗菌材料的制备工艺的一般规律,为开发适合我国国情的无机抗菌材料提供思路。     

煤矿综掘面泡沫降尘技术研究与实施

针对煤矿综掘面粉尘治理技术中存在的不足,采用泡沫降尘新技术结合长压短抽式通风方式进行粉尘防治。以霍尔辛赫矿为例,根据井下实际情况,利用GAMB IT和FLUENT建立掘进巷道的几何模型,并对巷道掘进通风过程中粉尘分布规律进行解算,将模拟结果和现场实测数据对比,确定掘进面回风侧的高浓度粉尘分布区。对掘进面煤样进行湿润性试验,确定最佳的发泡剂添加比例。综合以上情况,泡沫降尘技术实施时采用环形前置式喷头布置,发泡剂添加比例定为10‰,并在回风侧距掘进面5 m、距底板2 m处设置风筒,将高浓度粉尘抽出并沉降。现场实测数据显示,泡沫降尘技术降尘效率明显高于喷雾降尘技术。使用泡沫降尘时,在司机侧测得全尘及呼吸性粉尘降尘效率分别达到75.4%和74.7%。     

膨胀聚苯乙烯热分解动力学分析和寿命预测

针对既有聚苯乙烯泡沫类外墙外保温系统的防火问题,在空气和氮气气氛下对非阻燃和阻燃型膨胀聚苯乙烯泡沫进行了热重分析。样品由10℃/min、20℃/min、40℃/min和50℃/min四个升温速率从室温加热至800℃。热分解动力学参数由Flynn-Wall-Ozawa(FWO)等转化率方法和多参数非线性回归方法(multivariate non-linear re-gression method)计算,结果表明六溴环十二烷(HBCD)阻燃剂可一定程度上提高EPS的热稳定性。EPS在空气和氮气气氛下热解可认为是单步反应。非阻燃聚苯乙烯泡沫在空气和氮气气氛下的热解过程可由自催化n阶反应机理描述。阻燃EPS在空气气氛下的热解机理为自催化n阶反应,在氮气气氛下则为n阶反应机理。基于动力学参数和反应机理,对聚苯乙烯泡沫在不同温度下的寿命进行了预测。     

高分子吸水树脂作为蓄冷材料的性能研究

本文研究了不同吸水倍率的高分子吸水树脂的相变温度、相变潜热及作为蓄冷材料在35℃环境下的相变时间,并与冰做了对比。结果显示：吸收不同倍率水的高分子树脂。相变温度和相变潜热基本与水相似,随着吸水倍率的增加,相变潜热越接近于水的潜热;在相同条件下放置于隔冷袋中的高分子吸水树脂．在35℃高温环境中,可以维持20℃以下低温5h,比冰多了将近1h,克服了渗漏的缺点,在蓄冷领域表现出了明显的优势。     

Effects of release pressure on the transportation characteristics in pipeline and the diffusion behaviors in enclosure space of typical gas extinguishing agent

Reducing the release pressure of fire extinguishing systems can decrease potential safety hazards in large transport airplanes. To explore whether reducing the release pressure can achieve the release effect required by the airworthiness standards or not, the transportation characteristics in the pipeline and diffusion behaviors in the enclosure space of a typical fire extinguishing agent (Halon 1301) were investigated under five release pressures in the present study. The effects of the release pressure on the degree of superheat, injection duration, jet structure, and concentration distribution of Halon 1301 were analyzed. The results show that both of the degree of superheat and the injection duration decrease with an increase in the release pressure. The supplement of bubble expansion in the fire extinguishing agent can slow down the pressure decrease in the vessel. Both of the maximum and mean values of the pipeline differential pressure increase with an increase in release pressure. The maximum value of the jet angle decreases linearly with the increase in release pressure, and the jet deflects upward owing to the effects of buoyancy. The maximum concentration value decreases with an increase in the distance from the nozzle. The maximum concentration values in the near field from the nozzle increase with an increase in the release pressure. Under five release pressures, the concentration and holding time (duration above 6% volume concentration) of Halon 1301 on the centerline of the jet meet the requirements of airworthiness provisions.     

Renewable biomass gel reinforced core-shell dry water material as novel fire extinguishing agent

This work explores the feasibility of using chitosan (CS)-sodium alginate (SA) crosslinking gel to reinforce dry water (DW) composites. The stability and fire extinguishing efficiency of the DW powder are investigated. Compared to ordinary DW material, water loss rate of the modified DW composite is decreased, and its pressure resistance and stability are significantly increased. Moreover, it possesses higher fire extinguishing efficiency than conventional dry powder. Fire extinguishing mechanism and gel formation mechanism are proposed. The improvement in stability has great significance for the storage and transportation of DW materials. These results demonstrate the ability to create a fully green and renewable crosslinking gel capable of endowing high stability to DW material. This work provides a novel solution to improve the stability of DW materials, which will have great application prospect in fire suppression of some flammable hazardous chemicals.     

两种粉煤灰的烟气脱硫实验

采用粉煤灰(FA)和Ca(OH)2水合制得的高活性吸收剂作为二氧化硫的干法脱硫剂，重点研究了两种粉煤灰(电除尘灰和湿式水膜除尘灰)在同一配比、同一水合温度、同一水合时间下的脱硫效率，结果表明：电除尘灰比湿式水膜除尘灰脱硫效率高，并且电除尘的脱硫效率略微低于活性炭，同时介绍了粉煤灰的脱硫机理。     

分光光度法测定COD_(Cr)的试验条件选择

用分光光度法测定水中化学需氧量ＣＯＤＣｒ,通过正交试验选择氧化的最佳选择。试验结果表明对ＣＯＤＣｒ值为５０～１０００ｍｇ／Ｌ的水样：氧化剂Ｋ２Ｃｒ２Ｏ７用量为０．２０～０．４０ｍｏｌ／Ｌ,催化剂Ａｇ２ＳＯ４用量为１０ｇ／ＬＨ２ＳＯ４,消解时间１０ｍｉｎ,加热温度１８０℃。用ＣＯＤＣｒ为１３８ｍｇ／Ｌ的质控标样进行验证试验,其绝对误差为０．５～３．０ｍｇ／Ｌ。与标准方法相比用分光光度法测定ＣＯＤＣｒ具有分析误差小,省时、省力,节约药剂的特点。     

COD_(Cr)测定中排除氯离子干扰的进一步探讨

废水中化学需氧量的测定采用重铬酸钾法［１］,大多数情况下都存在Ｃｌ－干扰,其排除方法用ＨｇＳＯ４掩蔽,通过实验探讨不用剧毒药品ＨｇＳＯ４掩蔽Ｃｌ－的干扰,而用ＣＯＤＣｒ总量减去Ｃｌ－的量。实验结果表明：当测定化学需氧量较低而Ｃｌ－含量高的水样时,即使采用掩蔽Ｃｌ－也会产生较大的误差,而用测定值减去０．２２６［Ｃｌ－］之值更接近真值。     

复合螯合剂/活性碳分离富集和ICP—AES同时测定水样中痕量元素

本文提出将复合螯合剂（NaDDTC／8—Oxin）饱和吸附于活性碳上作为吸附材料．分离富集和ICP—AES同时测定水中痕量金属元素的方法。用ICP—AES研究了该吸附材料对某些痕量元素的吸附和解吸性能；考察了共存元素的影响。方法应用于湖水中Fe、Cu、Mn、Y和Sc的测定，检出限为ng／ml级，RSD为1．9％～4．4％，加入回收率81％～101％间，试样分析结果满意。