以梭鱼金属硫蛋白基因表达监测海洋重金属污染

分离了梭鱼金属硫蛋白132个碱基对应44个氨基酸的部分基因序列,以此为基础建立了分析梭鱼金属硫蛋白基因表达的实时定量PCR方法,并用于分析渤海南戴河和大神堂近岸海域野生梭鱼金属硫蛋白基因的表达.结果表明,南戴河野生梭鱼金属硫蛋白基因的表达水平(雄鱼:0.012 ± 0.0064 copies/copy β-actin;雌鱼:0.0099 ± 0.0042 copies/copy β-actin)明显高于大神堂野生梭鱼的表达水平(雄鱼:0.0017± 0.0011 copies/copy β-actin;雌鱼:0.0014 ± 0.00095 copies/copy β-actin).该结果与两地野生梭鱼体内重金属残留水平相一致,提示梭鱼金属硫蛋白基因可作为监测海洋重金属污染的敏感标志物之一.     

Design and use of group-specific primers and probes for real-time quantitative PCR

Real-time quantitative polymerase chain reaction (qPCR) has gained popularity as a technique to detect and quantify a specific group of target microorganisms from various environmental samples including soil, water, sediments, and sludge. Although qPCR is a very useful technique for nucleic acid quantification, accurately quantifying the target microbial group strongly depends on the quality of the primer and probe used. Many aspects of conducting qPCR assays have become increasingly routine and automated; however, one of the most important aspects, designing and selecting primer and probe sets, is often a somewhat arcane process. In many cases, failed or non-specific amplification can be attributed to improperly designed primer-probe sets. This paper is intended to provide guidelines and general principles for designing group-specific primers and probes for qPCR assays. We demonstrate the effectiveness of these guidelines by reviewing the use of qPCR to study anaerobic processes and biologic nutrient removal processes. qPCR assays using group-specific primers and probes designed with this method, have been used to successfully quantify 16S ribosomal Ribonucleic Acid (16S rRNA) gene copy numbers from target methanogenic and ammonia-oxidizing bacteria in various laboratory- and full-scale biologic processes. Researchers with a good command of primer and probe design can use qPCR as a valuable tool to study biodiversity and to develop more efficient control strategies for biologic processes.     

Co-fermentation of waste activated sludge with food waste for short-chain fatty acids production: effect of pH at ambient temperature

Effect of pH ranging from 4.0 to 11.0 on co-fermentation of waste activated sludge (WAS) with food waste for short-chain fatty acids (SCFAs) production at ambient temperature was investigated in this study. Experimental results showed that the addition of food waste significantly improved the performance of WAS fermentation system, which resulted in the increases of SCFAs production and substrate reduction. The SCFAs production at pH 6.0, 7.0, 8.0, and 9.0 and fermentation time of 4 d was respectively 5022.7, 6540.5, 8236.6, and 7911.7 mg COD·L^-1, whereas in the blank tests (no pH adjustment, pH 8.0 (blank test 1), no food waste addition, pH 8.0 (blank test 2), and no WAS addition (blank test 3)) it was only 1006.9, 971.1, and 1468.5 mg COD·L^-1, respectively. The composition of SCFAs at pH from 6.0 to 9.0 was also different from other conditions and propionic acid was the most prevalent SCFA, which was followed by acetic and n-butyric acids, while acetic acid was the top product under other conditions. At pH 8.0 a higher volatile suspended solids (VSS) reduction of 16.6% for the mixture of WAS and food waste than the sole WAS indicated a synergistic effect existing in fermentation system with WAS and food waste. The influence of pH on the variations of nutrient content was also studied during anaerobic fermentation of the mixture of WAS and food waste at different pH conditions. The release of NH4+-N increased with fermentation time at all pH values investigated except 4.0, 5.0 and in blank test one. The concentrations of soluble phosphorus at acidic pHs and in the blank test one were higher than those obtained at alkaline pHs. Ammonia and phosphorus need to be removed before the SCFAs-enriched fermentation liquid from WAS and food waste was used as the carbon source.     

Changes in polybrominated diphenyl ether (PBDE) levels in cooked food

Food surveys for levels of toxic chemicals frequently report the levels on an uncooked basis. It is known that cooking may in some conditions decrease the amount of dioxins and related chemicals in food. Surveys of polybrominated diphenyl ether (PBDE) levels in food to date show data from uncooked food only. In this article, it was shown that broiling, with fat dripped from the foods reported here, ground beef, ground lamb, catfish, trout, and salmon, reduces the amount of PBDEs in these foods. This suggests that calculations of food intake need to take into consideration levels in the cooked food rather than in the uncooked food.     

Residues and dissipation of the pesticide emamectin benzoate under Egyptian field condition: a case study

A simple, rapid analytical procedure for the quantification of emamectin benzoate in tomato was developed using high performance liquid chromatography with fluorescence detector (HPLC-FLD). Emamectin benzoate residues were extracted from tomato samples with n-hexane:ethyl acetate (1:1, v/v). The method involved derivatization using trifluoroacetic anhydride and 1-methylimidazole, prior to analysis by HPLC-FLD. Limit of quantification of this method was found to be 0.01 mg/kg, while limit of detection was 0.005 mg/kg. The dissipation of emamectin benzoate on tomato was studied, and half-life (t_1/2) was estimated in a field study carried out at three different locations. Emamectin benzoate was sprayed on tomato at recommended dosage. Samples of tomato were collected at 0, 1, 3, 7, 10, and 15 days after treatment. The t_1/2 of emamectin benzoate when applied at the recommended doses in tomato was approximately 2.5 days. The residue of emamectin benzoate reached below the maximal residue limit (MRL) 10 days after spraying at the tested dosage. Hence, a safe pre-harvest interval of 10 days is suggested before harvesting of tomato. This study would also be helpful for the Egypt government to establish the MRL of emamectin benzoate in tomatoes and provide guidance on the proper and safe use of this insecticide.     

Metal removal with two biochars made from municipal organic waste: adsorptive characterization and surface complexation modeling

The adsorptive characteristics of biochar produced from garden green waste (S-char) and a mixture of food waste and garden green waste (FS-char) were investigated. Adsorption of Cu²⁺, Zn²⁺, and Mn²⁺ onto the two biochars reached equilibrium within 48 hours. The metal adsorption was effectively described by the pseudo-second-order kinetic and Freundlich isotherm models which suggest heterogeneous chemisorption. The initial solution pH influenced adsorption of Zn²⁺ and Mn²⁺ but not of Cu²⁺. Simulation via a surface complexation model showed that the fraction of XOCu⁺ adsorbed onto biochar was increased with increasing pH until it reached the adsorption maximum at pH 8.5, while the endpoint for the maximum of XOMn⁺ was higher than pH 12.     

Industrial ecology flows of agriculture and food industry in Finland: utilizing by-products and wastes

Although half of the administrative units in China are said to have implemented their local Agenda 21, the promotion of sustainable communities is not pervasive. In this paper, we adopted a relatively untried mode of analysis and a socio-economic context to illustrate the potentials and failures of China's grassroots local government bodies in achieving sustainable waste management. Our study shows that, among the three main functions of sustainable waste management (ensuring environmental hygiene, provision of recycling logistics and changing the consumption pattern of the local community) for local governments, grassroots local government bodies in mainland China are only able to do the minimum, i.e. ensuring environmental hygiene and handling complaints. One of the reasons for the failure is that, despite the emphasis on capacity building in China's Agenda 21, the reality is that no action is taken to empower grassroots local government. Despite the high profile accorded by the Chinese central government to motivating local governments to formulate their own Agenda 21, local sustainability and waste management performance have little relevance to the appraisal systems of these government agents.     

Empirical analysis on the influence of the Shaanxi fruit industry on regional food security

As part of its development policy to relieve rural poverty in west China, the Chinese government has introduced measures such as agricultural tax exemptions, agricultural subsidies, and scientific, technological and restructuring improvements to agriculture. Following these actions, farmers’ incomes have increased greatly and the economy in poor areas of west China has seen rapid improvements. However, agricultural restructuring, infrastructure construction and ecological restoration projects have reduced the area of land under arable farming, restricting opportunities for increasing total grain yield. Regional food security is therefore threatened and an imbalance between economic development and food security is created. Shaanxi is a representative province in west China where agricultural restructuring has resulted in large areas of arable land being converted into orchards that produce higher economic returns. This study randomly surveyed 1430 farm households in three counties in the apple-producing region of Shaanxi Province (Luochuan, Changwu and Baishui). The standard of living and household income of farmers in the fruit production areas were higher than in grain-producing areas, thus discouraging grain production. Land under agriculture in the counties studied comprised 59% orchards and 39% arable, with 2% under other uses. Per capita, 204.3 kg of grain was produced, 51% of that required for self-sufficiency. Other staple foods produced amounted to only 13.9% of that needed for self-sufficiency. As a result, nearly half of the grain needed by the community was purchased from outside, resulting in very poor regional food security. Clearly, fruit production in this region seriously affects regional food security. Coordination of relationships between rural economic development and regional food security is key for sustainable development of the regional agriculture and economy of west China.     

Prioritization of applicable drivers for green supply chain management implementation toward sustainability in Thailand

ABSTRACT

It is essential that the green supply chain management (GSCM) implementation is effectively supported by several strategic drivers for successful implementation and sustainability, especially for the ‘green’ start-ups with a sustainability-driven organizational strategy. This study aims to determine and prioritize the applicable drivers for GSCM implementation of sustainable development strategies in the electronics industry in Thailand. The applicable drivers and their priorities are obtained by applying the fuzzy group decision-making approaches including fuzzy Delphi and fuzzy Analytic Hierarchy Process, based on Thai experts’ perspectives. In this study, three prominent organizational theories, resource-based view, relational view, and institutional theory, are needed to explain the drivers of sustainability and to develop a hierarchical model for prioritization of the drivers. Finally, based on the findings of this study, several recommendations are made that may help to improve the sustainable development in Thailand through more effective implementation of GSCM.     

森林净生态系统生产力及其生物影响因子研究进展

在全球大气二氧化碳浓度上升的背景下,陆地生态系统碳循环及碳汇功能研究得到了广泛的关注,日益成为今后的政治和外交的重大议题之一.净生态系统生产力(net ecosystem production, NEP)是生态系统光合固定的碳与生态系统呼吸损失的碳之间的差值;或者为生态系统净的碳积累速率.NEP 的研究整合生态系统地上和地下部分,把生态系统碳循环的影响因子有机地联系了起来.当NEP为正值时,说明生态系统为碳汇,NEP为负值则表明生态系统为碳源.随着植物和土壤相互联系及其对生态系统过程研究的深入,NEP已经成为生态系统碳循环研究的核心概念之一.以森林NEP为出发点,综述了国内外的最近的 NEP 研究进展,分析了 NEP 研究的科学意义;探讨了植物群落组成/生物多样性、土壤微生物群落、大型/土壤动物和人为的管理或干扰等生物因子对NEP的影响.根据综述研究提出未来研究应在:(1)土壤生物过程、土壤食物网及其与地上部分植物/动物相互作用对NEP的影响;(2)自然林生物多样性的竞争/共存机制与生态系统碳吸存稳定性;(3)人工林固碳潜力和不同植物功能群(灌草层)对生态系统碳动态影响等方面加强,以期为全面认识生物因子对森林生态系统系统固碳现状、机制和潜力提供理论基础.