Spectral estimation of global levels of atmospheric pollutants

Underlying levels of atmospheric pollutants, assumed to be governed by smoothing mechanisms due to atmospheric dispersion, can be estimated from global emissions source databases on greenhouse gases and ozone-depleting compounds. However, spatial data may be contaminated with noise or even missing or zero-valued at many locations. Therefore, a problem that arises is how to extract the underlying smooth levels. This paper sets out a structural spatial model that assumes data evolve across a global grid constrained by second-order smoothing restrictions. The frequency-domain approach is particularly suitable for global datasets, reduces the computational burden associated with two-dimensional models and avoids cumbersome zero-inflated skewed distributions. Confidence intervals of the underlying levels are also obtained. An application to the estimation of global levels of atmospheric pollutants from anthropogenic emissions illustrates the technique which may also be useful in the analysis of other environmental datasets of similar characteristics.     

Fuel efficiency improvement of a dual-fuel engine fuelled with Honge oil methyl ester (HOME)–bioethanol and producer gas

Renewable and alternative fuels have numerous advantages compared with fossil fuels as they are renewable and biodegradable and provide food and energy security and foreign exchange savings besides addressing environmental concerns and socio-economic issues (Yaliwal et al. 2013. International Journal of Sustainable Engineering, doi:10.1080/19397038.2013.801530. Zhu et al. 2011a, Applied Thermal Engineering 31 (14–15): 2271–2278; Zhu et al. 2011b, Fuel 90: 1743-1750; Banapurmath, Tewari, and Hosmath 2008, Renewable Energy 33: 2007-2018; Banapurmath 2009, “Performance, Combustion and Emission Characteristics of a Single Cylinder Direct Injection CI Engine Operated on Dual Fuel Mode Using Honge Oil and Producer Gas.” PhD thesis, 1–195; Banapurmath et al. 2011, Waste and Biomass Valorization 2: 1–11). In this context, the main objective of the present work is to study methods of biofuel production such as Honge oil methyl ester (HOME) using a conventional transesterification process and bioethanol from the Calliandra calothyrsus shrub using a new pretreatment method known as hydrothermal explosion. Further, experimental investigations were carried out on a single-cylinder, four-stroke, direct-injection stationary diesel engine operating in a dual-fuel mode using HOME, bioethanol and producer gas combinations to determine its performance, combustion and emission characteristics. The performance of the dual-fuel engine was analyzed at optimized engine conditions. HOME-Bioethanol (BE) blends such as HOME+ 5% bioethanol (BE5), HOME+ 10% bioethanol (BE10) and HOME+ 15% bioethanol (BE15) were prepared by adding bioethanol to HOME (on volume basis) in different proportions ranging from 5 to 15% with an increment of 5%. In this present work, the effect of different BE blends on the performance of producer gas fuelled dual fuel engine was studied. Experimental investigation on dual fuel engine using BE5-Producer gas operation resulted in up to 4–9% increased brake thermal efficiency with decreased hydrocarbon (HC), carbon monoxide (CO) and marginally increased nitric oxide (NOx) emission levels compared to HOME-Producer gas, BE10-producer gas and BE15-producer gas mode of operation. However, it was observed that, the overall performance of BE-producer gas operation was found to be lower compared to diesel-producer gas operation.     

Determination of concentration factors for Cs-137 and Ra-226 in the mullet species Chelon labrosus (Mugilidae) from the South Adriatic Sea

Concentration factors for Cs-137 and Ra-226 transfer from seawater, and dried sediment or mud with detritus, have been determined for whole, fresh weight, Chelon labrosus individuals and selected organs. Cesium was detected in 5 of 22 fish individuals, and its activity ranged from 1.0 to 1.6 Bq kg⁻¹. Radium was detected in all fish, and ranged from 0.4 to 2.1 Bq kg⁻¹, with an arithmetic mean of 1.0 Bq kg⁻¹. In regards to fish organs, cesium activity concentration was highest in muscles (maximum - 3.7 Bq kg⁻¹), while radium was highest in skeletons (maximum - 25 Bq kg⁻¹). Among cesium concentration factors, those for muscles were the highest (from seawater - an average of 47, from sediment - an average of 3.3, from mud with detritus - an average of 0.8). Radium concentration factors were the highest for skeleton (from seawater - an average of 130, from sediment - an average of 1.8, from mud with detritus - an average of 1.5). Additionally, annual intake of cesium and radium by human adults consuming muscles of this fish species has been estimated to provide, in aggregate, an effective dose of about 4.1 μSv y⁻¹.     

Global and regional abatement costs of Nationally Determined Contributions (NDCs) and of enhanced action to levels well below 2 °C and 1.5 °C

As part of the Paris climate agreement, countries have submitted (Intended) Nationally Determined Contributions (NDCs), which includes greenhouse gas reduction proposals beyond 2020. In this paper, we apply the IMAGE integrated assessment model to estimate the annual abatement costs of achieving the NDC reduction targets, and the additional costs if countries would take targets in line with keeping global warming well below 2 °C and “pursue efforts” towards 1.5 °C. We have found that abatement costs are very sensitive to socio-economic assumptions: under Shared Socioeconomic Pathway 3 (SSP3) assumptions of slow economic growth, rapidly growing population, and high inequality, global abatement costs of achieving the unconditional NDCs are estimated at USD135 billion by 2030, which is more than twice the level as under the more sustainable socio-economic assumptions of SSP1. Furthermore, we project that the additional costs of full implementation of the conditional NDCs are substantial, ranging from 40 to 55 billion USD, depending on socio-economic assumptions. Of the ten major emitting economies, Brazil, Canada and the USA are projected to have the highest cots as share of GDP to implement the conditional NDCs, while the costs for Japan, China, Russia, and India are relatively low. Allowing for emission trading could decrease global costs substantially, by more than half for the unconditional NDCs and almost by half for the conditional NDCs. Finally, the required effort in terms of abatement costs of achieving 2030 emission levels consistent with 2 °C pathways would be at least three times higher than the costs of achieving the conditional NDCs – even though reductions need to be twice as much. For 1.5 °C, the costs would be 5–6 times as high.     

Emissions from RDF/coal blended fuel combustion

The significant volume and weight reduction along with the energy potential of MSW, in the form of refuse derived fuel (RDF), has made its incineration an attractive alternative. However, the gaseous emissions such as, CO₂, CO, NO_x and SO₂, which are the byproduct of the combustion process pose serious environmental problems. These problems are compounded by the presence of certain highly regulated hazardous wastes such as, dioxins and furans in the exhaust stream. In the present investigation, different compositions of RDF/Coal blends were examined and the gaseous emissions from the combustion of the briquetted fuel were measured. Also, a direct comparison of emissions from RDF/coal blend incineration with coal combustion is presented in this paper. The potential for recovery of ferrous and non- ferrous metals provides an additional economic motivation for the use of RDF/Coal blended briquettes.     

低C/N比城市污水短程硝化特性及微生物种群分布

以城市污水厂二沉池回流液为接种污泥,研究了低C/N城市污水短程硝化特性及其微生物种群密度分布规律,并对比研究了SBR和SBBR 2种反应器短程硝化特性的差异。结果表明：在温度（30±1）℃、pH=7.9~8.2、DO=1.0 mg·L-1的条件下,通过分段曝气的运行方式、经过29 d的运行,2个反应器均实现了短程硝化的高效启动,NH4+-N转化率稳定在99%,短程硝化率稳定在90%以上;相比于SBR,SBBR更有利于AOB菌种的富集,且SBBR达到亚硝酸盐积累率最大效果的时间快于SBR。利用聚合酶链反应（PCR）和克隆测序等分子生物学技术分析得出,在短程硝化稳定运行的SBR系统中,AOB菌种与NOB菌种的占比为2.3：1。     

毛竹遗态 Fe2O3／Fe3O4／C 复合材料对水中锑（III）的吸附研究

以毛竹遗态Fe2 O3／Fe3 O4／C复合材料为吸附剂,锑（III ）初始含量、溶液初始pH值、吸附剂投加量以及吸附剂粒径为影响因素开展吸附影响研究。结果表明,随着锑（III ）初始浓度的升高,毛竹遗态Fe2 O3／Fe3 O4／C复合材料对锑（III ）的吸附量逐渐增加;初始溶液pH为7时,对锑（III ）的吸附效果最好,吸附量为4．7821 mg／g;块状吸附剂对水中锑（III ）的去除率和吸附量与粉末状吸附剂吸附效果相当。     

Equity Concerns over Climate Change Mitigation

Abstract

As a complicated concept with ethical implications, equity or fairness in the field of climate change mitigation concerns the relations not only between individual human beings but also between human beings and the nature. In this paper, after the review of equity between individuals, market and non-market attributes of emissions rights are distinguished and discussed. Based on the argument of equal per capita emissions rights, three types of emissions rights and the concept of minimum emissions rights as social security are proposed.     

The Clean Development Mechanism and Sustainable Development in China's Electricity Sector

Abstract

The Clean Development Mechanism, a flexibility mechanism contained in the Kyoto Protocol, offers China an important tool to attract investment in clean energy technology and processes into its electricity sector. The Chinese electricity sector places centrally in the country's economy and environment, being a significant contributor to the acid rain and air pollution problems that plague many of China's cities and regions, and therefore a focus of many related energy and environmental policies. China's electricity sector has also been the subject of a number of economic analyses that have showed that it contains the highest potential for clean energy investment through the Clean Development Mechanism of any economic sector in China. This mechanism, through the active participation from investors in more industrialized countries, can help alleviate the environmental problems attributable to electricity generation in China through advancing such technology as wind electricity generation, clean coal technology, high efficient natural gas electricity generation, or utilization of coal mine methane. In this context, the Clean Development Mechanism also compliments a range of environmental and energy policies which are strategizing to encourage the sustainable development of China's economy.     

Applying CES to assembly and comparing carbon footprints

A Carbon Emission Signature (CES) and a Carbon Emission Label have been proposed for manufactured products in previous CIRP (Collège International pour la Recherche en Productique) annals. This paper considers two things: (1) an example of a CES calculation for assembly with CO₂ emissions and (2) the need for a transparent method of calculation. In comparing carbon footprint calculations for 17 websites, the results are found to vary more than threefold depending upon the site used and even more between different methods illustrating the need for standardisation in emission calculations for carbon accounting.