基于单线振动台的角振动试验系统研究

目的 考核陀螺类产品在角振动环境下的适应性。方法 开发基于单线振动台的角振动试验系统,该系统以线角转换原理为依据,设计铰接机械结构,将线振动台的平动自由度转换为转动自由度。以角振动控制原理为依据,设计控制流程,实现闭环控制。结果 开展了角定频试验和角扫频试验,对系统的控制效果进行了验证。对比了线参数控制和角参数控制2种方法,结果表明,角参数控制法具有更高的控制精度。由于闭环控制的作用,角参数控制法可通过驱动电压的调整直接影响角参数值,从而抵消了部分由于系统连接、解耦或振动引入的误差。结论 该角振动试验系统解决了双台角振动旋转半径受限、线能力受限等问题,克服了摇摆台频带过窄的问题,为角振动试验提供一种新的实施方法。     

不同坡度对正庚烷流淌火燃烧特性的影响

针对液体燃油储运过程中泄漏引发的火灾爆炸事故,设计并搭建流淌槽坡度可调式液体燃油流淌火燃烧试验平台,开展连续泄漏正庚烷流淌火试验。选择水平表面(0°)流淌试验作为基准,改变流淌槽的坡度(0.5°,1°和3°),研究分析不同泄漏速率下连续泄漏正庚烷流淌火的燃烧面积、燃烧速率等燃烧特征参数的变化规律。结果表明:1)连续泄漏正庚烷流淌火燃烧特征参数均随泄漏速率增加而明显增加;2)坡度对连续泄漏正庚烷流淌火燃烧特性影响显著,即使流淌槽坡度增加0.5°,其燃烧特性即发生明显改变;3)连续泄漏正庚烷流淌火的平均稳定燃烧速率随流淌槽坡度的增加反而减小。     

Airborne Dust Particle Counting Techniques

The paper briefly describes an electro-optical system for counting of dust particles, which is based on the scattering phenomena.Utilizing the scattering of light by various size particles present in the environment, various particle counting techniques have been developed in order to measure the scattered intensity of light. Light scatters in all directions but much more in the so-called near forward direction 17^∘ off axis, at 163^∘ from the light source in the visible range.On the basis of two techniques, the right angle and forward angle scattering, opto-mechanical systems have been developed which measure scattered intensity and particulate matter. The forward scattering Nephelometer is more sensitive and therefore is more suitable for pollution monitoring than the right angle scattering Nephelometer. Whereas the right angle scattering Nephelometer has the utility in extremely low concentration in ppb level owing to the excellent light trap efficiency in comparison to forward scattering Nephelometer. In this paper measurement techniques and measurement results associated with design and development of a real time particle analyser are also discussed.     

Optimal water quality monitoring network design for river systems

Typical tasks of a river monitoring network design include the selection of the water quality parameters, selection of sampling and measurement methods for these parameters, identification of the locations of sampling stations and determination of the sampling frequencies. These primary design considerations may require a variety of objectives, constraints and solutions. In this study we focus on the optimal river water quality monitoring network design aspect of the overall monitoring program and propose a novel methodology for the analysis of this problem. In the proposed analysis, the locations of sampling sites are determined such that the contaminant detection time is minimized for the river network while achieving maximum reliability for the monitoring system performance. Altamaha river system in the State of Georgia, USA is chosen as an example to demonstrate the proposed methodology. The results show that the proposed model can be effectively used for the optimal design of monitoring networks in river systems.     

Simulating Nitrate Leaching Profiles in a Highly Permeable Vadose Zone

An approach is developed to simulate leaching of a dissolved chemical constituent in the vadose zone of an aquifer. Specifically, nitrate loading at the water table for different water table depths, for a range of aquifer permeability values, and for different cases of heterogeneity of the aquifer, are considered. Models from the literature are first used to derive soil–water characteristic curves (water retention and hydraulic conductivity) from a grain size distribution curve for unsaturated conditions. Given infiltration from the surface, the initial conditions for the chemical concentration, and the water content profile, leaching of the chemical in the vadose zone is simulated as a function of both time and depth. The methodology is illustrated for a permeable aquifer. Simulations are undertaken using a finite element code for saturated and unsaturated flow. Different scenarios are simulated depending on the heterogeneity of the aquifer and the depth of the water table. Modeling results show that in the example case studied, nitrate concentration loading at the water table does not depend strongly on the position of the water table, but rather on the material properties of the aquifer. The contribution of this endeavor resides in the methodology which allows a prediction of nitrate leaching using only the grain size property of the aquifer. It allows practitioners to obtain a first assessment of leaching with limited data.     

Studying soil organic matter using 13C CP-MAS NMR: the effect of soil chemical pre-treatments on spectra quality and representativity

¹³C CP-MAS NMR spectroscopy is a technique that has proved to be useful in studying soil organic matter (SOM). Nevertheless, NMR spectra exhibit a weak signal and have very low resolution due to: the low natural abundance of ¹³C (1.1 % of C) in SOM, the generally low SOM content of soils, and the presence of paramagnetic impurities. This paper studies the effects of soil chemical pre-treatments on ¹³CP-MAS NMR spectra quality and spectra representativity i.e. soil C mass balance.

After chemical pre-treatment to increase total organic carbon (TOC) content and C/Fe ratio, eight soils characterized by different levels of organic carbon content and C/Fe ratios were studied using ¹³CP-MAS NMR. Moreover, where chemical treatments were not applicable due to high carbon losses, the number of ¹³CP-MAS NMR scans was increased in order to obtain satisfactory spectra.

Results show that chemical pre-treatment of soils with C/Fe > 1 caused high C losses. Bulk soils were therefore studied by increasing the number of ¹³CP-MAS NMR scans. Acceptable spectra were obtained from 8K scans (1K = 1024 transient). On the other hand, even when a large number of scan (32K) are used, soil with C/Fe < 1 cannot be studied. As these soils are characterized by low C losses after HCl treatments (range of 2.9–25.4%), a pre-treatment of at least 1.39 mol l⁻¹ HCl removes excess Fe and at the same time increases C/Fe ratio resulting in 32K scans providing good spectra.     

太赫兹波斜入射均匀非磁化等离子中传输特性研究

目的 研究太赫兹波斜入射均匀非磁化等离子体中的传输特性。方法 根据分层介质中的电磁波传播理论,给出了等离子中太赫兹波的功率反射和透射系数,分析了太赫兹波频率、入射角、等离子体的碰撞频率和电子密度对太赫兹波传输特性的影响。结果 垂直入射时,模型结果与已有文献结果一致;斜入射时,入射角度增大,反射系数增大,透射系数变小。太赫兹波频率增大,反射系数减小,透射系数起初快速增大,而后变得平缓。等离子体的电子密度增大,透射系数减小,碰撞吸收增大,太赫兹波衰减增大。结论 入射角变大,反射率增大。太赫兹波频率较低时,入射角对透射率影响明显。     

电离层对短波测向系统的影响分析

目的研究电离层对短波测向系统的影响。方法从电离层传播介质入手,分析路径偏离效应和波干涉效应的形成机理及其对短波测向的影响。结果电离层系统倾斜引起的测向误差可借助电离层长期预测模型、短期预测算法或电离层实时探测数据对测向方位偏差进行补偿。行波扰动不可预测,只能依据行波扰动观测结果进行测向误差校正。波干涉误差可通过时间平滑进行抑制。结论提升现有短波测向系统测向性能的根本途径是为短波测向系统配备电离层探测设备,准确获取系统覆盖区内电离层状态信息,并进行传播效应补偿。