Effect of tracer dyes on initial deposits and persistence of bacillus thuringiensis subsp. kurstaki toxin after application of two commercial formulations onto spruce trees

Abstract

The effect of two tracer dyes [Erio Acid Red (EAR) and Acid Black 48 (AB‐48)] on initial deposits and persistence of Bacillus thuringiensis subsp. kurstaki (Btk) toxin (delta‐endotoxin) was studied after spraying two commercial formulations, Foray® 48B and Foray® 76B, over potted white spruce [Picea glauca (Moench) Voss] seedlings, at a dosage rate of 30 billion international units (BIU) per ha. Spray was applied using a spinning disc atomizer calibrated to deliver droplet sizes similar to those utilized in ultra‐low‐volume (ULV) treatments in operational insect control programs. The sprayed seedlings were left outdoors at the Sault Ste. Marie laboratory for 18 days under natural conditions of sunlight, wind and rainfall. Initial deposits and persistence of delta‐endotoxin protein in spruce foliage were determined by immunoassay [enzyme linked immunosorbent assay (ELISA)] quantification of the delta‐endotoxin. The total protein (inactive plus active) and delta‐endotoxin (active protein) concentrations in the two formulations were determined by a gravimetric procedure and by ELISA respectively.

The initial deposit levels of the toxin on foliage were not markedly affected by the addition of either of the two tracer dyes, and showed only a narrow range of 1521 to 1625 ng/g foliage (fresh weight) for Foray 48B, and 1789 to 2056 ng/g for Foray 76B. However, the persistence of the toxin was significantly influenced by the presence of the dyes. The toxin persisted in foliage only for 7 d post‐spray When the EAR dye was added to Foray 48B, compared to 10 d when no dye was added. The average half‐life (DT₅₀) of disappearance was 17.4 h for Foray 48B with EAR, and 20.9 h when no dye was present. In contrast, the situation was reversed in Foray 76B, since the duration of persistence was 10 d when EAR was added to Foray 76B, compared to 7 d when no dye was added. The average DT₅₀ was 27.9 h for Foray 76B with EAR, and 22.2 h without the dye. Persistence was the longest (14 d) when the AB‐48 dye was added to Foray 76B, and the DT₅₀ was 44.9 h.     

A method for the determination of rhodamine b and brilliant sulfaflavine on cotton string collectors and in a spray tank solution mixture

Abstract

A fluorescent method for the determination of rhodamine B (RhB) and brilliant sulfaflavine (BSF) dual tracers on cotton string collectors and in spray tank solutions was developed for the evaluation of the effects of adjuvants on the atmospheric drift of agricultural sprays. Both tracers on collectors were extracted with deionized water simultaneously and measured directly with a Fluorescent Specrometer by switching the maximum excitation and emission wavelengths. The linear ranges of the RhB and BSF standard curves were 0–50 and 0–10 ppb respectively. Recoveries of tracers on cotton strings ranged from 92.9% ± 1.1% to 95.1% ± 1.0% for RhB and 91.9% ± 2.8% to 103% ± 0.6% for BSF when spiked levels ranged from 0.25 to 2.5 μg per collector. The detection limit of the instrument was approximately 0.1 ppb for both tracers. The detection limits of the analytical method were approximately 0.1 ppb for RhB and 0.3 ppb for BSF when the background levels of cotton strings were subtracted. The presence of one tracer in the solution did not significantly interfere with the detection of the other tracer in the same solution. The presence of adjuvants added to the spray tank solutions did not interfere with the detection of both tracers when the adjuvants were applied at the manufacturer's maximum recommendation rates.     

粉煤灰负载铁离子催化氧化活性黄染料废水

以粉煤灰为载体,制备铁/粉煤灰负载型催化剂,并利用该催化剂催化H2O2氧化降解活性黄染料废水,探讨了H2O2投加量、催化剂投加量、染料初始浓度和初始pH值等因素对染料废水COD去除率和脱色率的影响。结果表明,当染料废水COD初始浓度为200 mg/L,初始pH值为1.7,投加0.5 g/100 mL催化剂及加入1.0 mL浓度为1.13 mol/L的H2O2溶液时,处理效果最好,此时染料废水的COD去除率和脱色率分别达到63%和99%,并且废水的可生化性得到很大的提高。利用该负载催化剂能够有效地减少活性黄染料废水中Fe3+的残留量。     

UASB反应器降解活性染料废水的特性

中温（35±1）℃条件下,采用上流式厌氧污泥床（upflowanaerobicsludgebed,简称UASB）反应器处理了含蒽醌类-活性艳蓝（c．I．ReactiveBlue5,简称K—GR）或偶氮类-活性艳红（C．I．ReactiveRed20,简称KD-8B;C．I．ReactiveRed2,简称X-3B）模拟染料废水,重点研究了回流比对染料脱色率和COD去除率的影响,在最佳回流比的条件下,探讨HRT（hydraulicretentiontime）对脱色的影响和不同结构染料的脱色效果,并初步分析了脱色机理。结果表明,适宜的回流比有利于提高系统的脱色率;控制回流比和HRT分别为2和24h,当模拟废水中染料的浓度为100mg／L时,COD去除率和脱色率分别为90％～96％和85％～92％;蒽醌和偶氮类染料的脱色是通过偶氮键和葸醌共轭结构的断裂来实现的。     

染化废水厌氧生物处理技术的研究

鉴于厌氧微生物对偶氮染料的还原裂解作用，开发了以易降解工业有机废水作为外加碳源的染化废水厌氧生物处理的新技术．试验结果表明：在进水ＣＯＤ３１００—３５００ｍｇ／Ｌ，ＣＯＤ总／ＣＯＤ染化比值４０，ＨＲＴ３．０ｄ下，ＣＯＤ去除率＞８０％，最低染化ＣＯＤ去除率＞４５％，色度去除率＞８５％；实验证实，在厌氧处理过程中，染料组分的结构已发生了明显的变化；反应器内的污泥大多呈颗粒状；污泥活性和工艺性能可控制工艺运行参数得以维持．     

不同环境条件下偶氮染料酸性大红GR的生物降解性能

为了考察不同环境条件下偶氮染料酸性大红GR生物降解性能,采用已驯化的混合菌群作为接种液进行偶氮染料酸性大红GR脱色试验。结果表明,微氧条件下(静置敞口培养),偶氮染料酸性大红GR脱色效果最佳,染料脱色主要发生在菌体的对数生长期。混合菌群对pH、温度适应范围较广,pH为3.32~9.18,温度在20℃~37℃范围内均可以获得较好脱色效果,脱色率均在80%以上。微氧条件下酸性大红GR降解历程表明,偶氮基整个共轭系统被破坏,生成了一种新的结构,使原有的某些精细结构在二阶导数光谱中得以表现,由此探讨其生物降解机理。     

Fe-C-H_2O_2协同催化氧化处理印染废水

用Fe-C-H2O2协同催化氧化体系对印染工业废水的降解脱色处理进行了研究。对影响印染废水降解的几种因素如铁屑/碳粒质量比、双氧水的质量分数、废水pH等进行考察。试验结果表明,对于色度为650度和ρ（COD）为468mg·L-1的印染废水,在废水pH=4.8的情况下,当铁屑/碳粒质量比为25∶1、H2O2用量为150mg·L-1、催化反应30min时,印染废水的脱色率达98%以上,CODCr去除率可达78%。与Fe-C微电解法相比,Fe-C-H2O2协同催化氧化方法对印染废水的脱色能力和去除COD,表现出了更好的处理效果。     

基因工程菌在厌氧膜生物反应器中对偶氮染料废水的脱色

印染和染料废水色度大,COD高,可生化性差.采用基因工程菌Escherichia coli JM109(pGEX-AZR)在厌氧膜生物反应器中,对模拟偶氮染料废水进行脱色研究.结果表明,系统对酸性红B有很好的脱色能力,且启动期短,脱色效率高,脱色率稳定在95%以上,对COD的去除率能达到68%.系统运行过程中,反应器内生物量稳定在0.4 g/L.EPS与生物量变化趋势一致,先升高后降低;pH值在运行初期由6.5降至6.2,后维持在6.6左右.系统运行27 d后进行第一次膜清洗,膜通量恢复为初始值的92%,系统运行周期约为26 d.     

壳聚糖/纳米CdS复合颗粒可见光光催化降解猩红B动力学研究

采用仿生矿化法制备了壳聚糖/纳米CdS复合颗粒光催化剂,并用于可见光光催化降解猩红B染料模拟废水,研究了猩红B初始浓度、pH、催化剂投加量和催化剂重复使用次数等因素对猩红B光催化降解的影响.X射线衍射(XRD)分析表明,壳聚糖能有效负载CdS纳米微晶.采用Langmuir-Hinshelwood模型描述壳聚糖/纳米CdS复合颗粒可见光光催化降解猩红B反应动力学行为,在猩红B初始质量浓度较低(≤20 mg/L)时,光催化降解过程符合假一级动力学方程.降低猩红B初始浓度和溶液pH都可显著增大光催化降解速率常数;催化剂投加量小于0.7 g/L时,光催化降解速率随其增加而增大,但催化剂投加量过大会使光催化降解速率减小;催化剂重复使用第5次时,猩红B光催化降解速率常数仍为第1次使用时的63.4%.     

电-生物耦合技术对偶氮染料的去除研究

酸性大红GR是一种较难生物降解的偶氮染料,采用一种电场和生物耦合的新型技术处理酸性大红GR模拟废水,并与单纯电化学法和好氧生物法进行试验对照。结果表明：反应6 h后,电化学法、好氧生物法、电-生物耦合技术对酸性大红GR的去除率分别达到15.7%、25.8%和71.2%,电-生物耦合技术能明显提高酸性大红GR的去除效果,起到强化生物处理的作用。在15 mA微电流条件下电-生物技术能克服50 mg/L酸性大红GR对好氧生物处理的抑制作用,为高浓度难降解染料废水的生物强化处理提供了可能。