公交车火灾安全及人员疏散分析

公交车作为最常用的交通工具之一,其空间密闭、人员密度大,一旦发生火灾,极易造成群死群伤事故,社会影响恶劣.首先采用鱼刺图分析法(FBF)分析公交车火灾事故发生的原因;再采用事故树分析法(FTA),得出公交车安全门对公交车内人员安全疏散的重要性;在此基础上,以大容量公交车为研究对象,针对不同开门情况设置4个疏散场景,并运用Building Exodus对车内人员疏散情况进行模拟,提出相应建议.结果表明,公交车右侧前门为1.1m、后门为1.Sm,右侧前、后门均为1.Sm,前门、左右两侧后门均为1.5m3种情况下均较原始设计(右侧前、后门均为1.1m)不同程度缩短了人员疏散时间.     

Application of CFD on the sensitivity analyses of some parameters of the modified Hartmann tube

The aim of this work is to determine the influence of operating parameters such as the dispersion pressure, the ignition delay and height on the dust flammability. A Computational Fluid Dynamics (CFD) simulation, based on an Euler–Lagrange approach, was developed with Ansys Fluent™ and validated experimentally. Such analysis will facilitate the choice of the most conservative conditions for a flammability test. This paper is focused on a case study performed on wheat starch with the modified Hartmann tube. The dispersion process of the powder was studied with granulometric analyses performed in situ and high speed videos. Tests were performed with injections at gas pressure ranging from 3 to 6 bars and the evolution of the particle size distribution (PSD) was recorded at different ignition heights (5, 10 and 15 cm over the dispersion nozzle). The observations highlighted the presence of agglomeration/deagglomeration processes and dust segregation. Besides, a CFD simulation analysis was aimed at evaluating the impact of a set of parameters on the PSD and the local turbulence, which are closely linked to some flammability parameters. For this computational analysis, the CFD simulation was coupled with a collision treatment based on a Discrete Element Method (DEM) in order to consider the cohesive behavior of the combustible dust. Thus the results suggest performing the injection of the gases at approximately 5 bars for the flammability tests of wheat starch in order to obtain the finest PSD at a given ignition height. It is also shown that the finest PSD are obtained at 5 cm over the dispersion nozzle. However, the local instabilities and turbulence levels are so high during the first stages of the dispersion that the flame growth can be disturbed for short ignition delays. Moreover, the stabilization of the bulk of the dust cloud requires longer periods of time when the ignition sources are located at 15 cm. As a result, the recommended height to perform a flammability test is 10 cm in this case. Finally, this study proposes some tools that might improve the procedure of dust flammability testing.     

基于LCA的北京市公交车节能及温室气体减排潜力分析

新能源公交车是未来城市公交行业节能及温室气体减排的重点发展方向.新能源公交车在行驶阶段具有良好的节能及温室气体减排效果,而汽车制造、能源生产等相关生命周期阶段的能耗及温室气体排放常被忽视,且目前新能源公交车的乘客运载功能相对较弱,可能对节能及温室气体减排的潜力造成较为显著的影响.因此,本文基于北京市公交车的运营特征,采用生命周期评价(LCA)方法,选择客运周转量作为功能单位,核算了天然气公交车、混合动力公交车和纯电动公交车等新能源公交车相对于柴油公交车的节能及温室气体减排效益.结果表明:发展新能源公交车对促进北京市公交行业及城市节能低碳发展具有积极的作用,但相对于基于运营里程的核算结果,本研究新能源公交车节能及温室气体减排潜力均较低,主要原因是新能源公交车的实际载客量相对较低;混合动力公交车和纯电动公交车在空调开启时的节能潜力与温室气体减排潜力均远低于天然气公交车;通过发展情景分析,建议北京市现阶段应优先发展天然气公交车,适当发展纯电动公交车和混合动力公交车,以减少北京市公交车的总体能耗,同时降低温室气体排放强度.     

超高速瞬态测试系统软硬件构架设计研究

目的研究采样频率为2~10 MHz的64通道超高速同步瞬态测试系统的设计技术,实现两类典型超高速瞬态测试系统的硬件架构设计与软件架构设计。方法一类采用PXI-Express高带宽总线和高速RAID磁盘阵列架构构建持续流盘存储的连续高速测试系统,另一类是采用大容量板载数据缓存和PXI总线事后下载传输数据的架构构造高速测试系统。在高性能测试软件设计方面,主要应用生产者/消费者结构与有限状态机相结合的软件架构进行高性能测试系统软件设计。结果目前64通道下基于持续流盘架构的测试系统受数据记录的速度限制系统最高采样频率仅达2.5 MHz,而基于板载缓存数据与PXI总线事后下载数据架构的测试系统最高采样频率可达10 MHz,测试时长可达5 s。结论当前两类架构的测试系统均可满足超高速瞬态测试需求,设计时需根据需求的最高采样频率决定使用的架构形式。     

土壤有机质含量测定方法的改进研究

通过研究改进了土壤有机质含量的测定方法。首先称取适量土壤置于长管消解系统中进行消解,然后采用全自动电位滴定仪进行滴定,直接获得土壤的有机质含量。使用该方法测定的土壤标准样品的有机质含量均在保证值以内,同时对实际样品进行精密度测试,得到相对标准偏差为1．03％。该方法降低了土壤有机质含量检测的实验成本,减少了环境污染,同时提高了实验数据的准确度与精密度,值得推广。     

Prenatal diagnosis in three cases of iniencephaly with unusual postmortem findings

Iniencephaly is a rare and lethal congenital malformation of the neural tube characterized by occipital bone defect, cervical dysraphism, fixed retroflexion of the fetal head and severe lordosis of the cervicothoracic spine. The etiology is unknown. Prenatally diagnosed cases of iniencephaly are rare because careful and early ultrasonographic evaluation is necessary. We present three cases of iniencephaly prenatally diagnosed by sonography at 20–22 weeks' gestation in which therapeutic abortion was induced. The sonographic findings were compatible with the postmortem findings. The present cases of iniencephaly were found to carry unusual associated malformations such as two lobes in the right lung and chorangiosis of the placenta. Only hypoplastic lungs have been reported by previous authors. We also studied the 677C→T mutation on the methylenetetrahydrofolate reductase gene in the parents in one of the present cases. The mother was found to be heterozygous for the 677CT polymorphism. Copyright © 2001 John Wiley & Sons, Ltd.     

油田用钨合金镀层腐蚀性能评价研究

目的评价钨合金镀层油管的腐蚀性能。方法利用高压釜模拟高压气井和高含硫气井的腐蚀环境,进行高压高温腐蚀试验,以及标准的氢致开裂(HIC)和硫化氢应力腐蚀试验。采用电子扫描显微镜(SEM)及其能谱仪(EDS)和X射线衍射分析仪(XRD),分析或检测钨合金镀层和基管的腐蚀形貌、腐蚀产物的组成。结果油管表面的钨合金镀层平整而致密,其主要组成元素为W和Ni。高温高压腐蚀试验后,镀层仍然致密平整,腐蚀程度轻微。在60、90、120、140℃试验7天时,镀层和基材的H_2S/CO_2腐蚀速率分别为0.0179、0.0093、0.0102、0.0369 mm/a和1.030、1.272、1.183、0.991 mm/a。试验30天,在120℃时,其H_2S/CO_2腐蚀速率分别为-0.0085、0.1789 mm/a;在160℃时,其CO_2腐蚀速率分别为0.0091、0.8976 mm/a。该钨合金镀层均通过了标准的氢致开裂和硫化氢应力腐蚀试验。结论该钨合金镀层具有很好的耐腐蚀性能。