2 000 m3高炉出铁场除尘系统分析

出铁场除尘系统在投产初期烟气捕集效果明显,随着运行时间的延长,系统阻力增加,风量衰减,最终导致烟气捕集效果下降,在高炉厂房外烟气外溢现象时有发生.从除尘系统的设计入手,对运行中存在的问题进行了分析,提出了解决问题的建议.     

武钢七号焦炉推焦烟尘的治理

针对武钢7~#焦炉存在的污染问题,进行了治理改造,采用热浮力罩除尘车,使集尘、除尘、生产于一体,运行后使除尘系统烟气净化效率得到提高,各种污染物都得到了降低。     

铬渣中铬的浸出行为

采用BCR法连续浸提研究铬渣中铬的存在形态,结果表明:铬渣中总铬和六价铬主要以残渣态和可氧化态形式存在;通过铬渣动态连续浸提实验与静态浸提实验研究了浸提剂和活性炭对铬渣中铬浸出行为的影响,研究发现p H值为3.1的醋酸浸提剂浸出液中铬浓度最低,且添加活性炭后的静态浸出液中铬的浓度有不同程度降低。     

微波-混凝处理高炉煤气洗涤水的实验研究

本文探索了微波作为辅助手段处理高炉煤气洗涤水过程中,微波辐射功率、微波辐射时间、聚合氯化铝(PAC)加入量、磷酸加入量对高炉煤气洗涤废水处理效果的影响。结果表明,微波和PAC混凝联用处理高炉煤气洗涤废水具有作用时间短、聚沉能力强等特点,可以有效去除废水中悬浮物,降低硬度及浊度。     

Removal kinetics of phosphorus from synthetic wastewater using basic oxygen furnace slag

Removal kinetics of phosphorus through use of basic oxygen furnace slag (BOF-slag) was investigated through batch experiments. Effects of several parameters such as initial phosphorus concentration, temperature, BOF-slag size, initial pH, and BOF-slag dosage on phosphorus removal kinetics were measured in detail. It was demonstrated that the removal process of phosphorus through BOF-slag followed pseudo-first-order reaction kinetics. The apparent rate constant (k_obs) significantly decreased with increasing initial phosphorus concentration, BOF-slag size, and initial pH, whereas it exhibited an opposite trend with increasing reaction temperature and BOF-slag dosage. A linear dependence of k_obs on total removed phosphorus (TRP) was established with k_obs = (3.51 ± 0.11) × 10^− 4 × TRP. Finally, it was suggested that the Langmuir–Rideal (L–R) or Langmuir–Hinshelwood (L–H) mechanism may be used to describe the removal process of phosphorus using BOF-slag.     

Removal kinetics of phosphorus from synthetic wastewater using basic oxygen furnace slag

Removal kinetics of phosphorus through use of basic oxygen furnace slag(BOF-slag)was investigated through batch experiments. Effects of several parameters such as initial phosphorus concentration, temperature, BOF-slag size, initial p H, and BOF-slag dosage on phosphorus removal kinetics were measured in detail. It was demonstrated that the removal process of phosphorus through BOF-slag followed pseudo-first-order reaction kinetics. The apparent rate constant(kobs) significantly decreased with increasing initial phosphorus concentration, BOF-slag size, and initial p H, whereas it exhibited an opposite trend with increasing reaction temperature and BOF-slag dosage.A linear dependence of kobson total removed phosphorus(TRP) was established with kobs=(3.51 ± 0.11) × 10- 4× TRP. Finally, it was suggested that the Langmuir–Rideal(L–R)or Langmuir–Hinshelwood(L–H) mechanism may be used to describe the removal process of phosphorus using BOF-slag.     

Preparation of steel slag porous sound-absorbing material using coal powder as pore former

The aim of the study was to prepare a porous sound-absorbing material using steel slag and fly ash as the main raw material, with coal powder and sodium silicate used as a pore former and binder respectively. The influence of the experimental conditions such as the ratio of fly ash, sintering temperature, sintering time, and porosity regulation on the performance of the porous sound-absorbing material was investigated. The results showed that the specimens prepared by this method had high sound absorption performance and good mechanical properties, and the noise reduction coefficient and compressive strength could reach 0.50 and 6.5 MPa, respectively. The compressive strength increased when the dosage of fly ash and sintering temperature were raised. The noise reduction coefficient decreased with increasing ratio of fly ash and reducing pore former, and first increased and then decreased with the increase of sintering temperature and time. The optimum preparation conditions for the porous sound-absorbing material were a proportion of fly ash of 50% (wt.%), percentage of coal powder of 30% (wt.%), sintering temperature of 1130°C, and sintering time of 6.0 hr, which were determined by analyzing the properties of the sound-absorbing material.     

锰渣填埋场渗滤液及周边水体的水化学特征和质量评价

本文在分析锰渣填埋场区渗滤液及周边水体水化学组成的基础上,运用改进的水质量指数(WQI)进行了水质评价,阐述了填埋场渗滤液对下游水体的影响过程。结果表明,研究区渗滤液pH呈中性偏酸性,EC在1 780~44 500μS/cm之间,渗滤液中NH4-N、Mn2+、Mg2+、SO2-4、NO-3的浓度较高,并呈现SO2-4Mn2+Mg2+NH+4-N的特征,并且浓度与堆存时间呈负相关性。填埋场下游水体的重金属浓度微量,但NH4-N和Mn2+浓度较高,均超过GB 3838—2002和GB/T 14848—93规定的限值,其中2014年5月份某地下水的这两个参数分别超标243倍和488倍。改进的WQI指数评价结果显示,地表水的渗滤液水污染指数(LWPI)值在2.89~7.83之间,受影响的地下水为172,说明渗滤液已对锰渣填埋场下游水体造成严重影响。     

焙烧炉筒体结构强度有限元分析

对焙烧炉筒体结构进行有限元建模仿真,考虑热应力、压力和重力对筒体结构受力的影响,计算了焙烧炉关键部位的蠕变疲劳寿命,同时探究进气温度、保温层及对流系数等参数的影响。结果表明:热应力是影响结构强度的关键因素;焙烧炉筒体在许用蠕变变形量为5%的情况下,其使用寿命超过设计寿命;在筒体加热过渡段铺设保温层,降低与外界空气对流和提高进气温度,有利于降低筒体应力。     

高炉出铁场除尘方案研究

某钢铁企业高炉炼铁车间的出铁场在生产过程中产生大量高浓度的烟尘,对厂区的大气环境及周边的环境造成严重污染,同时直接危害了职工的身体健康。通过对整个出铁场除尘工艺系统及通风状况的分析及实际应用情况,总结出了适合该场合的系统除尘方案。