复杂矿井通风系统角联风路自动识别方法的研究

角联风路的识别与稳定性分析是矿井通风系统稳定性与可靠性分析理论中的核心内容之一。笔者对通风系统角联风路进行了深入的研究;分析了通路法的局限性,简化了角联风路的数学模型,提出了快速、准确、灵活的角联风路自动识别的新方法——节点位置法;编写了角联风路自动识别软件,并应用现场数据进行测试,将其结果与通路法的结果进行了比较分析;证明了节点位置法是切实可行的。     

森工企业伐木作业事故成因分析与预防措施

以森工企业伐木作业三起事故为案例,对造成事故的原因进行了分析,根据事故成因提出了相对应的事故预防措施.     

Using consequence analysis on some chlorine operation hazards and their possible effects on neighborhoods in central Taiwan

The applications of chlorine have been broadly used in many industrial products, such as bleaching agents, synthetic rubbers, plastics, disinfectants, iron chlorides, fire refractory materials, insecticides, and anti-freezers, etc. According to the Taiwan Environmental Protection Administration (TEPA), more than 30 thousand tons were used in the year 2000. In addition, there were more than 12 reported incidents from 2000 to 2003—mostly on using chlorine as disinfectants (five) and as process agents (four).

This study investigated 15 chlorine operation plants in central Taiwan. These chlorine usages included bleaching agents, disinfectants, iron chloride, synthesizing rubber plastics, and others. Thirteen plants were located in the industrial parks and two were in or near residential zones. The consequence analysis were used three different methods to analyze the worst-case scenarios (WCSs) and alternative release case scenarios (ACSs) in order to compare impact zones for applying various active and passive mitigation systems, such as confined space, scrubber, water-spray, and so no. For two plants in or near residential zones, multi-layers mitigation systems and operation limits should be implemented in order to enforce more stringent protection measures. However, there was no specific regulation for chlorine plants operated at different locations, such as industrial parks or residential zones. In order to reduce chemical accidents and their impacts on public safety, our results suggest that source mitigation/management and warning systems should be adopted simultaneously.     

红外和热分析联用在化工产品研究中的应用

运用实例论述了红外光谱分析与热分析联用在化工产品的产品开发和检测方面的应用。     

Discriminate Analysis for Dust Storm Prediction in the Gobi and Steppe Regions in Mongolia

A discriminate analysis method for probability forecast of dust storms in Mongolia has been developed. The prediction method uses data recorded at 23 meteorological stations in the Gobi and steppe regions of Mongolia, including surface air pressure and geo-potential height at the 500-hPa level on grid points, and weather maps from 1975 to 1990. Weather elements such as air temperature, pressure, geo-potential height etc, which influence the formation of dust storms, are prepared as predictors. To select the most informative/important predictors (variables), we used a mean correlation matrix of variables together with the Mahalonobis distance, and correlation coefficients between dust storms and predictors with an orthogonalization for removing correlated predictors. The most informative predictors for dust storm prediction are intensities of surface cyclones and migratory anticyclones, passage of cold fronts, the horizontal gradients of the surface air pressure in the cold frontal zone, cyclonic circulations from the ground surface up to the 500-hPa level, the geo-potential height at 500-hPa level and its temporal changes. Selected predictors are used in discriminate analysis for formulating dust storm prediction equations. Sandstorm data have been classified into three classes, viz., strong, moderate and weak dust storms, depending on their intensities, durations and areas covered. Predictions of the probabilities of dust storm occurrence use the prediction equations for each class. The prediction is made from 12 hours to 36 hours. Verification of the probability forecasts of dust storms is also shown. The accuracy of forecasts is 72.2–79.9% with the data used for developing equations (dependent variables), in contrast to 67.1–72.0% with unrelated data for deriving equations (independent variables).     

Estimating the Recreational-Use Value for Hiking in Bellenden Ker National Park, Australia

The recreational-use value of hiking in the Bellenden Ker National Park, Australia has been estimated using a zonal travel cost model. Multiple destination visitors have been accounted for by converting visitors’ own ordinal ranking of the various sites visited to numerical weights, using an expected-value approach. The value of hiking and camping in this national park was found to be $AUS 250,825 per year, or $AUS 144,45 per visitor per year, which is similar to findings from other studies valuing recreational benefits. The management of the park can use these estimates when considering the introduction of a system of user pays fees. In addition, they might be important when decisions need to be made about the allocation of resources for maintenance or upgrade of tracks and facilities.     

Life cycle energy impacts of automotive liftgate inner

This paper compares the life cycle energy use of a cast-aluminum, rear liftgate inner and a conventional, stamped steel liftgate inner used in a minivan. Using the best available aggregate life cycle inventory data and a simple spreadsheet-level analysis, energy comparisons were made at both the single-vehicle and vehicle-fleet levels. Since the product manufacture and use are distributed over long periods of time that, in a fleet, are not simple linear combinations of single product life cycles. Thus, it is all the products in use over a period of time, rather than a single product, that are more appropriate for the life cycle analysis. Using a set of consistent data, analyses also examine sensitivity to the level of analysis and the assumptions to determine the most favorable materials with respect to life cycle energy benefits.As expected, life cycle energy impacts of aluminum are lower than steel at a single-vehicle level – energy savings are determined to be 1.8 GJ/vehicle. Most energy savings occur at the vehicle operation phase due to improved fuel economy from lightweighting. The energy benefits are realized only very close to the average vehicle life of 14 years. With the incremental growth of the vehicle fleet, it takes longer – about 21 years – for aluminum to achieve life cycle equivalence with steel. The number of years aluminum needs to achieve equivalence with steel was found to be quite sensitive to aluminum manufacturing energy and fuel economy. As the steel industry races to compete with other materials for automotive lightweighting, a systems approach, instead of part-to-part comparison, is more appropriate in the determination of viability of aluminum substitution from an energy perspective.     

浙江省生态环境可持续发展评价指标体系的建立

生态环境的可持续发展评价是生态安全与生态建设中的重要内容。本研究应用主成分分析法，收集浙江省1990～2000年的数据，对评价指标进行初步筛选．同时采用德尔斐法进行专家咨询，得到评价指标的分层排序。最后从初选的54个评价指标中，根据主成分分析法、专家咨询法的指标筛选结果，结合有关国家及地方生态环境建设规划，建立了由40个指标组成的浙江省生态环境可持续发展评价指标体系。     

考虑应变速率影响的混凝土重力坝非线性地震响应分析

通过引入应变速率、损伤变量以及刚度退化指标等参数,建立了应变率相关的混凝土弹塑性损伤模型。运用该模型对某重力坝厂房坝段分别就率相关及率无关两种情况进行了三维非线性地震响应时程分析。深入研究了混凝土应变速率等相关特性对结构动力响应的影响。结果表明,应变速率对混凝土的力学性能有一定的影响,随着应变速率的增加,坝体结构的变形减小,主拉应力有所提高,应变能有所减小以及开裂损伤有一定的降低。所得结论对混凝土重力坝的震害研究有一定的参考价值。     

拉索预应力空间网格结构的索张力计算及张拉全过程分析

实际工程中,对于拉索预应力空间网格结构的索张拉是一个需要反复调整的繁琐过程。对此,提出了一种针对多阶段多批次张拉施工全过程分析的计算方法,用以提高索张拉施工的效率。该法通过不断减小拉索实际张力与目标张力的差值来求解各索在张拉过程中应该产生的初始应变,最后只要利用计算结果并按照预定的顺序张拉,便可使所有索只经过一次张拉就能最终达到各自的目标张力值。对一个150 m跨度的拉索预应力球面巨型网格结构进行了计算,并利用计算结果,对结构的杆件内力和最大节点位移进行了张拉全过程跟踪分析。结果表明,在实际工程中采用上述方法进行计算与张拉是切实可行的,另外,在张拉过程中进行跟踪分析十分必要。