Ergonomic Program Effectiveness: Ergonomic and Medical Intervention

The implementation of a successful ergonomic and medical intervention program designed to reduce the number and severity of injuries and illnesses and the associated levels of discomfort in the workplace is presented. Because of the recent activity concerning the on-again-off-again Occupational Safety and Health Administration (OSHA) Ergonomic Program Standard questions have been raised as to the value and effectiveness of an organization’s ergonomics program. In light of these concerns, the immense cost associated with work-related injury and illness, and the related pain and suffering associated with such injuries and illnesses, it is important to present a workable and effective ergonomic and medical intervention program. The results of this applied study demonstrate that through the application of an ergonomic and medical intervention program, workplace-related injuries and illnesses can be reduced or eliminated.     

Handheld-Assisted Field Data Collection for Occupational Risk Assessment

A computerized handheld procedure is presented in this paper. It is intended as a database complementary tool, to enhance prospective risk analysis in the field of occupational health. The Pendragon forms software (version 3.2) has been used to implement acquisition procedures on Personal Digital Assistants (PDAs) and to transfer data to a computer in an MS-Access format. The data acquisition strategy proposed relies on the risk assessment method practiced at the Institute of Occupational Health Sciences (IST). It involves the use of a systematic hazard list and semi-quantitative risk assessment scales. A set of 7 modular forms has been developed to cover the basic need of field audits. Despite the minor drawbacks observed, the results obtained so far show that handhelds are adequate to support field risk assessment and follow-up activities. Further improvements must still be made in order to increase the tool effectiveness and field adequacy.     

Safety Climate in Finnish- and Swedish-Speaking Companies

The aim of this study was to compare assessments made by Finnish- and Swedish-speaking workers in Finland about the safety climate in their companies, because an earlier study showed that the accident frequency of Swedish-speaking workers was one third lower than that of Finnish-speaking workers. 148 Finnish-speaking and 138 Swedish-speaking workers from 14 small and medium-sized companies participated in this study. They filled out a Finnish safety climate questionnaire, the reliability of which was above the acceptable level. There were no differences between the language groups in the total variables of safety climate and safety action. Based on the differences in single items, we interpreted that Swedish-speaking workers stressed collective safety more, whereas Finnish-speaking workers put more emphasis on their personal responsibility for safety.     

Simulation of Reflected and Scattered Laser Radiation for Designing Laser Shields

This paper presents a computer simulation of reflected and scattered laser radiation for calculating the angle of laser shields performed with the Laser Shield Solver computer program. The authors describe a method of calculating the shield angle for laser shields which protect workers against reflected and scattered laser radiation and which are made from different materials. The main assumptions of the program, which calculates and simulates reflected laser radiation from any material and which can be used for designing shield angles, are presented. Calculations are compared with measurements of reflected laser radiation. The results for one type of laser and different materials which interacted with a laser beam showed that the Laser Shield Solver was an appropriate tool for designing laser shields and its simulations of reflected laser radiation distribution have practical use.     

Aspects of Tests and Assessment of Filtering Materials Used for Respiratory Protection Against Bioaerosols. Part I: Type of Active Substance,Contact Time,Microorganism Species

This paper presents the results of a study on antimicrobial activity of polymer filter nonwovens produced by needle-punching or melt-blowing with an addition of disinfecting agents. The first part of the paper discusses how the biocidal activity of nonwovens is a function of the active agent added to the nonwovens, the duration of the contact of microorganisms with nonwovens and the type of microorganisms. The types of fibres and disinfecting agents had a considerable effect on the biocidal activity of nonwovens. The biocidal effect of nonwovens increased with the duration of their contact with microorganisms. Fibre activity differed considerably depending on the species of the microorganism. The microorganisms most sensitive to biocidal activity of the active filter nonwoven were S. aureus, M. flavus and E. coli. There were no biocidal effects on spore-forming bacterium B. subtilis.     

The determinants of employee participation in occupational health and safety management

This article focuses on employee direct participation in occupational health and safety (OHS) management. The article explains what determines employee opportunities to participate in OHS management. The explanatory framework focuses on safety culture and safety management at workplaces. The framework is empirically tested using Estonian cross-sectional, multilevel data of organizations and their employees. The analysis indicates that differences in employee participation in OHS management in the Estonian case could be explained by differences in OHS management practices rather than differences in safety culture. This indicates that throughout the institutional change and shift to the European model of employment relations system, change in management practices has preceded changes in safety culture which according to theoretical argument is supposed to follow culture change.     

Stress,coping and safety compliance in a multinational gold mining company

The primary objective of this study was to investigate the relationship of work stress, consisting of role stressors and job insecurity, with safety compliance at work. A secondary objective was to test for the possible moderating effect of individual employees’ coping behaviour between experienced work stress and job insecurity, and their safety compliance. A cross-sectional survey design was used (n?=?771). An electronic survey, with a biographical questionnaire and scales on role conflict, role ambiguity, role overload, job insecurity, coping and safety compliance at work, was administered. The results indicated that specific aspects of work stress, notably role conflict, role ambiguity and quantitative job insecurity, and of coping, namely an avoidance style and changing the situation, were important in understanding safety compliance. A moderating effect of avoidance coping was also found.     

Quantitative risk analysis of urban natural gas pipeline networks using geographical information systems

This paper presents a novel quantitative risk analysis process for urban natural gas pipeline networks using geographical information systems (GIS). The process incorporates an assessment of failure rates of integrated pipeline networks, a quantitative analysis model of accident consequences, and assessments of individual and societal risks. Firstly, the failure rates of the pipeline network are calculated using empirical formulas influenced by parameters such as external interference, corrosion, construction defects, and ground movements. Secondly, the impacts of accidents due to gas leakage, diffusion, fires, and explosions are analyzed by calculating the area influenced by poisoning, burns, and deaths. Lastly, based on the previous analyses, individual risks and social risks are calculated. The application of GIS technology helps strengthen the quantitative risk analysis (QRA) model and allows construction of a QRA system for urban gas pipeline networks that can aid pipeline management staff in demarcating high risk areas requiring more frequent inspections.     

扬沸火灾发生时间预测模型的建立与应用分析

原油储罐扬沸火灾由池火灾发展而成,是一种危害性极大的事故.准确预测扬沸事故发生的时间,是扬沸机理研究中的难题之一.现有扬沸时间计算的通用模型由于没有考虑油品的粘性作用,计算结果误差较大.把扬沸火灾简化为无内热源的非稳态传热问题,在此基础上进行传热分析,进而推导出扬沸事故时间计算模型.设定了6组不同尺寸和不同充装水平的原油储罐池火灾,利用推导模型计算出了相应的扬沸事故发生时间.将计算结果与通用模型计算结果以及实验结果进行对比:该模型的准确性由于通用模型,计算结果与实验值误差较小,较为合理.研究结果对于扬沸火灾事故下消防人员的灭火救援的安全保障具有重要意义.     

数量化理论Ⅲ及其在煤与瓦斯突出危险性评估中的应用

研究了数量化理论Ⅲ建立煤与瓦斯突出危险性的原理和方法,以瓦斯地质学理论为基础,建立了包括煤层瓦斯含量、煤层瓦斯压力、煤层分岔合并现象、地质构造复杂程度、煤的破坏类型等11个地质因素的煤层突出危险性评估指标体系。以数量化理论Ⅲ为工具,实例分析得出马依西一井3煤层突出危险性的敏感地质因素及因素轴F1,以该轴上得分大于0.1的地质因素作为强突出的敏感地质因素;得分小于-0.1的地质因素作为弱突出的敏感地质因素,得分在0.1--0.1之间的地质因素作为中等突出的敏感地质因素,将矿井划分为强突出、中等突出和弱突出三个区域。该方法实现了地勘阶段煤与瓦斯突出的定量分析,进一步细化了突出区域的划分。