HAN阻隔防爆模型研究

通过合理简化,利用多方气体状态方程,分别建立油品储运容器内可燃混合气体定容爆炸模型和装设阻隔防爆材料的油品储运容器内可燃混合气体爆炸模型,获得了阻隔防爆性能测试装置的燃爆容器抗爆设计限值,以及其在HAN阻隔防爆测试中燃爆容器试爆压力量级的控制下限值,同时,还给出HAN工程应用中容器留空率的计算方法,具有实际指导意义。     

煤矿瓦斯爆炸事故演化的突变模型

煤矿瓦斯爆炸事故,从微观上看,是在瓦斯积聚、引火源和氧气浓度3个条件同时具备的情况下发生的,从宏观上看,是在生产活动中存在人的不安全行为和物的不安全状态导致了微观3条件的同时具备。笔者介绍了突变理论的基本原理;在轨迹交叉事故致因理论基础上,分析了瓦斯爆炸事故演化的非线性特征;建立了事故演化的尖点突变模型。并指出:事故演化是一个流变-突变过程,其突变的程度反映了事故的严重度;人的不安全行为是事故发生的主要因素;物的因素决定事故的严重度;安全生产必须建立本质安全型矿井,避免人和物的运动轨迹越过分歧点集。     

城市燃气管道事故应急抢修方案的决策分析

通过对近年来的城市燃气管道事故抢险统计数据的分析与研究,管道事故抢险方案的选择存在着很大的主观性和片面性.为了克服应急抢修方案的种种局限,笔者应用模糊综合评判方法建立了城市燃气管道事故应急抢修方案评价选择模型;考虑可靠性、抢修时间、事故损失、抢险费用、社会影响及政治影响等6类影响因素来评判抢修方案的优劣,可以科学合理地选择最佳的管道事故应急抢修方案,达到经济合理、快速可靠的目的;实例验证,评判模型对城市燃气管道事故抢险具有重要的现实意义和参考价值.     

The greenhouse gas balance of the Province of Siena

There is a profound debate over how to assign greenhouse gas (GHG) responsibilities; therefore, we have decided to follow IPCC guidelines, as they offer the only standardized method. We have identified each type of greenhouse emission and its level of absorption. We have studied the province and its districts and municipalities. We have determined that the energy sector is that with the highest level of emissions, even if the per capita emissions of the Province of Siena are very low. This is caused by a very low level of industrialization and the presence of a local geothermal production of energy. In order to highlight this aspect, we have considered scenarios both with and without geothermal production. Our research was then focused on single districts (groups of homogenous municipalities) and municipalities, where we found great differences among the greenhouse emissions of the areas. We have constructed a map of the greenhouse emissions of the whole province. It has been interesting to note that there are 14 municipalities with net negative emissions, seven with low positive emissions, 12 with medium positive emissions and three with elevated positive emissions. These latter correspond to the main city and to two of the most industrialized municipalities.     

Experimental Study of the Criteria of Flow Laminarization in Two-Dimensional Dense Gas Plumes

Laminarization of flow in a two-dimensional dense gas plume was experimentally investigated in this study. The plume was created by releasing CO₂ through a ground-level line source into a simulated turbulent boundary layer over an aerodynamically rough surface in a meteorological wind tunnel. The bulk Richardson number (Ri_*), based on negative plume buoyancy, plume thickness, and friction velocity, was varied over a wide range so that the effects of stable stratification on plume laminarization could be observed. A variety of ambient wind speeds as well as three different sizes of roughness arrays were used so that possible effects of roughness Reynolds number (Re_*) on plume laminarization could also be identified. Both flow visualization methods and quantitative measurements of velocity and intermittency of turbulence were used to provide quantitative assessments of plume laminarization.Flow visualization provided an overall picture of how the plume was affected by the negative buoyancy. With increasing Ri_*, both the plume depth and the vertical mixing were significantly suppressed, while upstream propagation of the plume from the source was enhanced. The most important feature of the flow revealed by visualization was the laminarization of flow in the lower part of the plume, which appeared to be closely related to both Ri_* and Re_*.Measurements within the simulated dense gas plumes revealed the influence of the stable stratification on mean velocity and turbulence intensity profiles. Both the mean velocity and turbulence intensity were significantly reduced near the surface; and these reductions systematically depended on Ri_*. The roughness Reynolds number also had considerable influence on the mean flow and turbulence structure of the dense gas plumes.An intermittency analysis technique was developed and applied to the digitized instantaneous velocity signals. It not only confirmed the general flow picture within the dense plume indicated by the flow visualization, but also clearly demonstrated the changes of flow regime with variations in Ri_* and Re_*. Most importantly, based on this intermittency analysis, simple criteria for characterizing different flow regimes are formulated; these may be useful in predicting when plume laminarization might occur.     

典型钢铁企业汞排放水平及排放特征研究

以某典型钢铁企业为研究对象,测定企业废气、废水、固废汞排放水平,并分析汞排放特征。研究表明,球团、烧结、高炉工艺废气排口烟尘中汞排放浓度和排放速率明显低于烟气;汞主要以气态形式排放,烧结工艺排口废气汞最高浓度分别是其他2个排口的7倍和3倍。球团、烧结、高炉、电炉四工艺环节中,烧结汞排放速率占四工艺汞排放速率总和的87%。半干法脱硫、氨法脱硫、石灰石石膏脱硫对废气中汞的去除效率分别为90.0%、78.7%和29.9%。企业废水排放未检出汞,脱硫产生固废汞含量明显高于除尘产生固废汞含量,脱硫灰汞含量是脱硫石膏的15倍。     

外力作用下管道内表面缺陷处裂纹扩展研究

为提高油气管道安全风险评估的准确性,以含内表面缺陷管道为研究对象,利用ABAQUS软件线弹性及弹塑性分析不同尺寸缺陷对裂纹萌生特征的影响;采用扩展有限元法,建立管道3点弯曲模型与全尺寸静载物理试验,并非线性拟合裂纹扩展尺寸,研究内表面缺陷处裂纹扩展情况.研究结果表明:内表面缺陷中心处极易萌生裂纹,随着缺陷尺寸的增大,裂...     

顶空气相色谱法在测定水中三氯乙醛的应用

研究以DB-624交联石英毛细管柱分离,微电子捕获检测器-顶空气相色谱法测定水中三氯乙醛的应用,与以往的方法相比,准确可靠、省工省时省试剂,符合"绿色分析化学"的要求。最低检出限为0.2μg/L,标准偏差为0.028μg/L,相对标准偏差为6.0%,加标回收率为88.7%～109%。     

有机废气中VOC的回收方法

介绍了炭吸附法、冷凝法和膜分离法回胥机废报中ＶＯＤ的原理、工艺流程和工业应用情况，并对这些方法进行了比较，指出了适用范围。     

平煤十矿底板巷穿层钻孔瓦斯抽采模拟研究

为了降低平煤十矿己15-16-24130工作面运输巷掘进中的突出危险性,基于实际工程背景,考虑瓦斯抽采中的瓦斯运移及煤岩变形等因素,建立了瓦斯抽采气固耦合模型,并利用COMSOL Multiphysics软件对平煤十矿己15-16煤层的底板巷穿层钻孔瓦斯抽采方案进行数值模拟,研究了瓦斯抽采对于降低掘进过程中突出危险性的影响。研究结果表明:在己18煤层开挖底板巷对己15-16煤层进行穿层钻孔瓦斯抽采,瓦斯抽采180 d后,己15-16-24130工作面运输巷附近煤层残余瓦斯压力及瓦斯含量分别降至0.315 MPa和3.84 m3/t;将底板巷穿层钻孔瓦斯抽采方案进行工程应用,实测抽采后的残余瓦斯压力及瓦斯含量在0.32 MPa和3.17 m3/t,均小于平煤十矿煤与瓦斯突出防治规定的“双6”指标（残余瓦斯压力小于0.6 MPa,残余瓦斯含量小于6 m3/t）,可有效降低运输巷掘进过程中的突出危险性。