大气中挥发性苯系物的Carbotrap吸附气相色谱法

本文研究以Ｃａｒｂｏｔｒａｐ作吸附剂，在常温采集大气中挥发性苯系物，直接采用热脱附气相色谱分析。对新型吸附剂Ｃａｒｂｏｔｒａｐ的采样－脱附－分析精度，回收率，突破体积等作了试验。本法具有灵敏度高，操作简单，不需复杂的样品预处理，色谱峰好，吸附剂可反复使用等优点。可对大气中１０－９级苯系物进行测定，ＲＳＤ≤３．５％。     

物理化学预处理与膜分离技术的应用

将物理化学预处理与膜分离技术深度处理结合应用于工业废水处理，可使其中的Ｃｒ６＋＜０．５ｍｇ／ｌ，Ｚｎ２＋＜２０ｍｇ／ｌ，ｐＨ６～９。用膜分离技术处理造纸废水可回收其中的木质素和糖份，回收率均为６０％左右。     

烟气对人体的危害及研究

丙纶强力丝在加工过程中，聚丙烯在高温下发生分解，产生有害烟气，造成操作环境污染，危害人体健康．采用提高抽风机位置，加大排风量，改进风机换气次数等措施，除烟率达85％以上．     

锅炉烟气脱硫技术发展综述

在调查研究的基础上，论述国内外烟道气脱硫技术的发展与前景，提出开发生产适合我国国情的烟气脱硫技术势在必行。还简要介绍了最为普遍的石灰／石灰石法脱硫基本原理。     

膜生物反应器与传统活性污泥工艺除污特性比较

比较了膜生物反应器（MBR）和传统活性污泥工艺（CAS）在相同运行条件下对生活污水的除污特性.结果表明,MBR系统对COD、NH3-N和TN的平均去除率比CAS分别高14.4%、51.2%和37.3%.但MBR中膜的截留使系统相对比较封闭,制约了通过排放高磷污泥的生物法除磷,除磷效率仅为32.9%,低于CAS工艺（43.0%）;将MBR与化学除磷工艺相结合,MBR系统除磷效率可达93.3%.     

烟气自动在线监控系统的历史发展与技术分析

对现阶段我国烟气自动在线监测系统(对固定污染源排放的烟气中的SO2、NOx、CO等气态污染物进行自动连续监测和数据自动在线传输的系统,称为Continuous Emission Monitoring Systems,简称CEMS)仪器设备市场上的三种主要技术方法:直接分析法,in-situ;完全抽取法,Extractive;稀释法,Dilution,结合安装使用现场实际工作,进行了对比与分析,并提出了烟气自动在线监测系统CEMS的改良方法与发展方向.     

Treatment of a dyeing wastewater from a woolen mill using an A/O membrane bio-reactor

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｄｙｅｉｎｇｗａｓｔｅｗａｔｅｒｏｆｗｏｏｌｅｎｍｉｌｌｃｏｎｔａｉｎｓａｌｏｔｋｉｎｄｓｏｆｐｏｌｌｕｔａｎｔｓ,ｓｕｃｈａｓａｃｉｄｉｃｄｙｅｓ,ｄｉｓｐｅｒｓｅｄｙｅｓ,ｍｏｒｄａｎｔｄｙｅｓ,ａｕｘｉｌｉａｒｉｅｓ,ｓａｌｔｓａｎｄｓｏｏｎ .Ｔｈｅｅｆｆｌｕｅｎｔｓｆｒｏｍｗａｓｔｅｗａｔｅｒｔｒｅａｔｍｅｎｔｐｌａｎｔｓｆｏｒｔｒｅａｔｍｅｎｔｏｆｔｈｅｄｙｅｉｎｇｗａｓｔｅｗａｔｅｒｏｆｗｏｏｌｅｎｍｉｌｌｓｗｉｔｈｎｏｒｍａｌｂｉｏｌｏｇｉｃａｌｐｒｏｃｅ…     

涡凹气浮机在炼油污水处理中的应用

对涡凹气浮机在炼油污水气浮工艺的改造的应用进行了总结，改造后该气浮机具有投资省、运行费用低、操作维护简单、工作效率高等优点，且运行稳定，效果比较理想，应用前景十分广阔。     

应用LDN-1氮氧化物脱除剂实现催化再生烟气NOx达标排放

独山子炼油厂催化裂化装置再生烟气中NOx含量达到1300-1400mg／m3(国家排放标准<420mg／m3),对周围环境造成严重影响。应用LDN-1氮氧化物脱除剂后,催化再生烟气中的NOx含量由1300-1400 mg／m3降至420 mg／m3以下,实现了达标排放。     

Test of membrane bioreactor for waste water treatment in a petrochemical complex

Membrane bioreactor (MBR) used in water and waste water treatment is a developing technique for water pollution control and water reuse. This paper describes a membrane-bioreactor for treatment of waste water in a petrochemical complex. The experimental MBR was a lab scale one composed of an activated sludge bioreactor unit and an ultrafiltration membrane unit. The relationship of COD removal with MLSS and HRT in this MBR was studied. The effects of crossflow velocity, backwash interval and volume of flush liquid on the flux were discussed. The results showed that average removal of COD, oil, SS and turbidity in petrochemical waste water by the MBR was 91%, 86%, 92% and 99% respectively. The average removal of NH₃-N and total phosphorous was 85% and 82%. A coefficient of COD removal, k, was 0.017-0.080 L/(mg.d). The membrane flux maintained higher than 60 L/hm2 bar for 34 days without chemical cleaning when the velocity of crossflow was 3.5-3.9 m/s and the backwash interval was 30 minutes and backwash duration at 20 seconds. The results indicated that it is feasible for MBR technology to be used in petrochemical waste water treatment. The treated water could be considered as a source used to make up water for industrial cooling system or to be reused for other purposes.