Multipoint source method in air pollution modelling of cold start emission

The paper presents a new method of air pollution modelling on a micro scale. For estimation of concentration of car exhaust pollutants, each car is treated as an instantaneous moving emission source. This approach enables us to model time and spatial changes of emission, especially during cold and cool start of an engine. These stages of engine work are a source of significant pollution concentration in urban areas. In this work, two models are proposed: one for the estimation of emission after cold start of the engine and another for the prediction of pollutant concentration. The first model (defined for individual exhaust gas pollutants) enables us to calculate the emission as a function of time after the cold or cool start, ambient temperature and average speed of motion. This model uses the HBEFA database. The second mathematical model is developed in order to calculate the pollutant dispersion and concentrations. The finite volume method is applied to discretise the set of partial differential equations describing wind flow and pollutant dispersion in the domain considered. Models presented in this paper can be called short-term models on a small spatial scale. The results of numerical simulation of pollutant emission and dispersion are also presented.     

The feasibility of including sustainability in LCA for product development

The feasibility of combining the concept of sustainability principles and the methodology of Life Cycle Assessment (LCA) is examined. The goal is to achieve an operational tool that incorporates sustainability in product development and strategic planning. While the method outlined has the structure of LCA, it emphasises aspects and parameters often omitted from traditional LCA. The analysis and results can be either qualitative or semi-quantitative. Although a qualitative analysis is less time consuming, it can still highlight the important issues. Qualitative information, which is easily lost in a quantitative analysis, can be emphasised. One of the conclusions is that the method is well suited for screening analysis.     

废旧塑料回收利用技术

从我国废塑料回收利用的现状出发 ,分析了今后我国废塑料回收利用技术的发展趋势和应采取的措施 ,指出了废塑料回收利用的重要性。     

综合福利视角下中国生态文明建设绩效评价及国际比较

基于强可持续研究范式,以生态经济学和可持续发展理论为基础,运用两阶段网络Super-EBM模型进行绩效测算和评价,打开生态福利转化过程的“黑箱”,基于综合福利视角将生态文明建设绩效进一步分解为生态经济效率和经济福利效率,实证研究部分选取2006-2015年的时间序列数据对中国“十一五”和“十二五”期间的生态文明建设绩效水平进行纵向分析,与此同时,选取42个国家2014年的截面数据进行横向的国际对比研究。研究表明：（1）“十一五”到“十二五”期间,中国生态文明建设绩效（0.986）整体水平一般,均未实现DEA有效,但“十二五”期间已呈现出逐年改善的利好趋势。国际比较层面,瑞士（1.647）、印度尼西亚（1.365）、爱尔兰（1.039）依次排名前三位,中国（0.297）排名相对靠后,位列倒数第二。各国之间差异较大,总体上呈现出“OECD国家（0.677）最高、G20国家（0.611）次之、金砖国家（0.417）最低”的态势。（2）从分阶段效率来看,无论是纵向分析还是横向对比,均发现第一阶段的生态经济效率明显低于第二阶段的经济福利效率,生态经济效率偏低是导致生态文明建设绩效总体水平偏低的主要原因。（3）与传统的单阶段、径向或非径向DEA模型相比,两阶段网络Super-EBM模型综合考虑了径向和松弛变量问题,测算出来的效率值更为精确,能够更为客观地反映现实。同时,对于其他领域涉及两阶段或多阶段生产系统的效率或绩效评估具有较好的借鉴价值。最后,根据上述结论提出相应的政策建议。     

低浓度渣油-水系乳化液的抑尘性能现场试验研究

本文介绍了作者用渣油－水系乳化液做路面抑尘剂在某矿露天坑３种不同类型路面进行的大规模工业性试验。现场测定结果表明：这种路面抑尘剂可以获得比较理想的防尘效果，长期使用该乳化液可取得显著的综合经济效益。     

A comparison of hydrocarbons emission from engine running 85# gasoline and M-100 methanol fuel

Increasing global interest in methanoi fuel has led us to investigate the exhaust emissionsof its engine. Analysis of its inorganic and organic emissions. such as CO. NO_x and hydrocarbons(total HC) have been widely reported. This paper presents an analysis of more than 20 kinds ofhydrocarbons in the emissions obtained from a spark-ignition Shanghai car running 85^# gasoline anda comparison with emission from a Santana test car running M-100 methanol fuel. A set ofenrichment method has also been described. Test results show that at the current stage of methanolengine development the concentration of individual hydrocarbon including some poisonous substancesis lower than those of normal gasoline engine.     

连州电厂湿法烟气脱硫系统的综合评价

从技术性能、经济性能两方面对连州电厂的广东省首套石灰石 /石膏湿法烟气脱硫系统进行了全面的评价     

环境模型的统计评价

系统地探讨了评价模型的统计指标,并在BOD反应动力学模型中使用,取得了较好的效果。     

Results of a questionnaire investigation on the management of environmental issues during conceptual design. A case study of two large made-to-order companies

This paper investigates the current treatment of environmental issues by two companies within the large made-to-order sector. Fifty questionnaires were issued to the design team of each company to assess current practice in the integration of environmental issues with design activities, awareness of environmental issues, awareness of existing environmental design tools and the preferred format for a potential clean design tool.     

含铅,无铅汽油车尾气排出物遗传毒性比较

利用台架试验模拟汽车行驶工况，收集了发动机使用无铅汽油，含铅汽油燃烧后的尾气颗粒物，对其中吸附的有机物进行了提取，并以Ａｍｅｓ试验，中国仓鼠肺细胞体外微核实验等方法，从基因，染色体水平检测了两种颗粒提取的遗传毒性。