Multiple linear regression models of urban runoff pollutant load and event mean concentration considering rainfall variables

Rainfall is an important factor in estimating the event mean concentration (EMC) which is used to quantify the washed-off pollutant concentrations from non-point sources (NPSs). Pollutant loads could also be calculated using rainfall, catchment area and runoff coefficient. In this study, runoff quantity and quality data gathered from a 28-month monitoring conducted on the road and parking lot sites in Korea were evaluated using multiple linear regression (MLR) to develop equations for estimating pollutant loads and EMCs as a function of rainfall variables. The results revealed that total event rainfall and average rainfall intensity are possible predictors of pollutant loads. Overall, the models are indicators of the high uncertainties of NPSs; perhaps estimation of EMCs and loads could be accurately obtained by means of water quality sampling or a long term monitoring is needed to gather more data that can be used for the development of estimation models.     

Experimental investigation on effect of an absorber plate covered by a layer of sand on the efficiency of passive solar air collector

A passive flat-plate solar air collector was constructed in the laboratory of New and Renewable Energy in Arid Zones, Ouargla University, South East Algeria. The absorber of the passive flat-plate solar air collector was laminated with a thin layer of local sand. This acted as a thermal packed bed with a collecting area of 0.5 m² (1 m × 0.5 m). Three series of experiments were performed. The first consisted of choosing the best sand brought from three different places of the Algerian desert. The second consisted of studying the effect of the thickness of the sand layer on the daily efficacy of the collector. The influence of the sand diameter was investigated in the third series. The experimental results showed that: All collectors covered with sand had higher efficiency than those without. It was noticed that, for a fixed mass of sand (given thickness of the sand layer), the improvement of the collector was inversely proportional to the sand particle diameters. The maximum efficiency approximates 62.1% for a particle diameter 0.063 mm, compared to 41.71% for a diameter 0.250 mm.The efficiency of the collector for a fixed particle diameter increases with the increase in the thickness of the sand layer. The collector with thickness sand layer 0.84 mm gave the best efficiency of 46.14% compared to 27.8% for 0.28 mm of thickness sand layer.     

不同后处理器对DMCC发动机PM排放的影响

在一台整车排放达到国Ⅲ标准的YC4D140电控单体泵增压中冷柴油机上加装甲醇喷射系统,改成柴油甲醇组合燃烧(DMCC)发动机.使用AVL 415S烟度计和DMS 500快速颗粒物光谱仪研究不同后处理器对DMCC发动机颗粒物(PM)排放的影响.试验结果表明,各工况下单独CDPF、DOC+CDPF基本可以消除发动机产生的干炭烟.DOC+CDPF后处理方式与单独CDPF相比,颗粒物捕集效率明显提高,且前者对颗粒物中核态部分的捕集效果更加突出.甲醇掺烧后,炭烟和颗粒物几何平均直径降低.经CDPF和DOC+CDPF处理,415S烟度计测得的炭烟进一步降低;DMS颗粒物光谱仪显示的颗粒物粒径,因其中核态部分大部被氧化捕集而仅余较大几何平均直径的部分.小负荷时经CDPF和DOC+CDPF处理,颗粒物的几何平均直径会增大,大负荷时则相反.各工况下相比于CDPF,DOC+CDPF对核态颗粒物捕集更有效.     

煤粒筛分现象与粒度分布特性的试验研究

在求解煤的物性参数时,为探究煤粒平均粒径对参数求解的影响,以5种不同粒级的煤粒为研究对象,系统研究筛分现象和粒度分布;以煤粒瓦斯扩散系数求解为例,分析算术平均值、体积加权平均体积粒径对计算结果的影响.研究结果表明:煤颗粒在筛分过程中会出现特殊分选现象,目标粒级粒度分布仅占真实粒度分布的33.37％～49.32％;算术平...     

Density estimation using ranked-set sampling data

The ranked-set sampling (RSS) is applicable in practical problems where the variable of interest for an observed item is costly or time-consuming but the ranking of a set of items according to the variable can be easily done without actual measurement. In the context of RSS, the need for density estimation arises in certain statistical procedures. The density estimation also has its own interest. In this article, we develop a method for the density estimation using RSS data. We derive the properties of the resulted density estimate and compare it with its counterpart in simple random sampling (SRS). It is shown that the density estimate using RSS data provides a better estimate of the density than the usual density estimate using SRS data. The density estimate developed in this article can well serve various purposes in the context of RSS.     

汽车环境风洞降雨模拟影响因素研究

目的 研究自然界降雨量与汽车环境风洞模拟降雨量之间的关系,得到中国气象条件的雨量设定经验公式,为汽车环境风洞模拟降雨量的设定提供理论依据。方法 理论分析自然界气象降雨和汽车环境风洞模拟降雨的特点和差异,研究影响汽车环境风洞模拟降雨量的因素。结果 在无风条件下,影响汽车环境风洞降雨量的因素有气象降雨量、前挡风玻璃倾角、雨滴直径和车速等。按照车速将降雨分为汽车停止和汽车行驶2种模式,提出结合中国气象条件的汽车环境风洞模拟降雨量的经验公式。结论 在相同降雨等级下,汽车停止状态下的汽车环境风洞降雨量一般大于车辆行驶状态。在气象降雨量等级为短时中雨时,行驶汽车的雨量设定值与车速呈指数增长关系。     

Spatial analysis of resources and environmental carrying capacity in Iran

Urbanization and mass movement of the population from rural areas and small cities to megacities have led to environmental, economic, and social problems in Iran. In dealing with these challenges, assessing resource and environmental carrying capacity (RECC) is considered an effective method to leverage space and capital to achieve sustainable development. This study aimed to rank the provincial RECC in Iran. Toward this purpose, environmental indices were generated from remotely sensed and statistical census data. Then, the provinces were scored in terms of environmental, economic, and infrastructural carrying capacities, and RECC using the mean variance analysis method. Results demonstrated that in most areas, there is no relationship between economic and infrastructural capacities and development. Statistically, a correlation coefficient of −0.53 between economic and environmental carrying capacities indicated excessive use of environmental capacities. Moreover, the spatial distribution pattern of environmental, economic, and infrastructural carrying capacity was entirely heterogeneous between the provinces; there was a northeast–southwest pattern in terms of infrastructural capacity and an economic pattern from north to south. The distribution pattern of RECC is most consistent with the environmental capacity, pointing at the high weight of the indicators of the RECC model. In conclusion, this research offers a new vision for policymakers and provides a theoretical and applicable framework for implementing sustainable strategies in land-use planning. It is recommended that the RECC concept and tools can be used not only for planning but also for measuring the efficiency of spatial development programs and establishing land balances in the region.     

分层水环境曝气诱导形成内波的过程与特性

采用分层水库模型,在平均温度梯度为0.37℃/cm条件下,开展了系统的曝气诱导内波的中试研究.分析了曝气诱导形成内波的过程,探究了曝气诱导形成内波的类型,重点揭示了曝气扰动源形式和跃温层厚度对内波形成过程和特性的影响.实验结果表明：扬水曝气产生的气水两相流是一种非定常的周期性扰动源,气水两相流的尾迹带动整个模型水体上下振动,这种振动在分层水体跃温层处诱导形成内波.从激发源角度上说,它是一种尾迹效应波.气弹释放周期在44.06～58.69s之间时,内波波高达到最大,当气弹释放周期达到180s时不能形成连续的内波;曝气器出流口增大,内波波高、周期呈增大趋势.分层水体的跃温层厚度也影响内波的形成,相同温度梯度条件下,随着跃温层厚度的增加,内波的波高、周期随之增大.     

概率统计在矿井通风系统可靠性评估中的应用

构建一个随机非稳定地下矿山通风系统,此通风系统有三个机组,机组的随机运行状态构成了一个完整的“系统的概率结构”。对此通风系统的运行状态进行概率统计分析,探讨了该随机系统的特征。由此推导出了通风系统故障的平均时间是一个显式的概率表达式。同时,假设系统失效时间和更换时间符合指数分布的情况下,得出计算系统故障平均时间的一个五阶多项式公式。通过验证,证明了系统故障平均时间的大小依赖于系统维修和更换的比率,而且是检验系统可靠性的重要指标,有利于提高矿山安全水平。     

菌根真菌侵染对植物生物量累积的影响

为了从生态系统尺度探讨菌根资源与植物生物量累积的关系,调查了鼎湖山不同成熟度的三个森林群落主要优势树种的菌根侵染情况.综合分析各森林群落优势树种的个体数、生物量和菌根侵染率发现：1）菌根侵染率与径向生长速率相关,植物生长迅速的阶段菌根侵染率更高.中径级（胸径15-30 cm）的马尾松（Pinus massoniana）和锥（Castanopsis chinensis）的侵染率比小径级（胸径1-15 cm）个体的侵染率高,而大径级个体（胸径30 cm 以上）的侵染率略低于中径级个体的侵染率.木荷（Schima superba）则表现出侵染率随着胸径增大而增高的趋势.2）树种在群落内的侵染率越高,其对群落生物量的贡献率越大.如马尾松在马尾松林和混交林的侵染率分别为（77.30±18.02）%和（40.50±14.42）%,其对马尾松林群落生物量的贡献率达到87.43%,是对混交林生物量贡献率（17.51%）的5 倍.混交林和阔叶林的共有优势树种锥的侵染率和生物量贡献率也有存在相同规律.3）根系碳储量占群落总碳储量比例较高的群落其优势树种平均侵染率相对较高.马尾松林、混交林和季风常绿阔叶林中,根系碳储量占群落总碳储量的比例分别为55%、54%、42%,群落优势树种平均侵染率分别为（66.73±10.55）%、（46.97±27.28）%、（54.22±25.45）%,马尾松林的根系碳储量和平均侵染率均高于混交林和季风常绿阔叶林.以上结果表明,菌根真菌侵染对于植物个体生长速率以及群落水平的生物量累积具有-定的促进作用.