密封消解法测定高氯离子含盐废水COD_(Cr)的探讨

针对国标重铬酸钾法测定高氯离子含盐废水CODCr时的不足,提出用密封消解法来测定高盐废水CODCr的观点,通过丁酮氧化率、氯离子干扰、混配水样和实际水样测定结果的比较,对国标法和密封消解法进行了验证。试验结果表明:在测定高氯离子含盐废水CODCr值时,密封消解法优于重铬酸钾法,能够真实准确地反映废水的CODCr。     

MODEL STUDIES OF SALT WATER INTRUSION1

Model studies were and are still being used to verify certain theories in ground-water flow systems in general. In complex cases, the model studies may be extremely useful especially when a theoretical rigorous analysis does not exist. The models cannot be considered entirely satisfactory due to the several drawbacks in each type in addition to the normal human errors in experimentation. This paper is concerned only with the viscous flow models. However, a brief summary of the other types of models, which may possibly be used in connection with salt water intrusion problems is given. It should be noted that some of such experiments are not directly related to the field of salt water intrusion. Two main types lie within this category: The gravity flow systems which are analogous to some phases of salt intrusion problems and problems in oil fields which bear general similarities to sea water intrusion zones. In oil fields, gas cycling studies give valuable information to sea water problems. Model studies are used by hydraulic engineers, geologists, petroleum engineers, physicists, foundation engineers and several other professional groups.     

广东沿海地区海平面上升影响综合评估

从系统的角度出发,建立了海平面灾害综合评估因子指标体系,引入了抗灾能力指数的概念,提出了一个综合评估模型,并以广东省沿海地区为例进行了海平面上升影响综合评估,结果表明,由于模型中考虑了抗灾能力指数,变被支评估为主动评估,使海岸灾害风险等级的评估结果更符合实际,评估结构可用于指导宏观抗灾,救灾,减灾等活动,该模型已用于广东海平面的地理信息系统（光盘）。     

Epilithic Diatoms in an Alpine Lake (Traunsee,Austria) Affected by Soda and Salt Mining Industries

Traunsee, a 191 m deep Alpine lake in Austria, is affected by industrial tailings from the soda and salt mining industries since 1883. In 1998 littoral water chloride concentrations ranged between 40 and 85 mg L^-1 and the highest conductivity was 560 S cm^-1, which is almost double as high as the values reported from the two nearby reference lakes. Chloride concentrations increased towards the location of the industrial salt and soda emission into the lake. Analogously to the chloride gradient, the epilithic littoral diatom flora changes towards the waste inlet. Shifts in the species percentages towards the emission source, a high percentage of taxa with large conductivity tolerances, the presence of a small Achnanthes minutissima Kützing morphotype, and occurrences of taxa focused at habitats of higher electrolyte content, indicate subtle impacts on the epilithic diatom flora. An analysis of the seasonal succession of the epilithic diatoms at the waste inlet compared to a lake intern reference site, reveals that only during the late summer period in 1998 the diatom assemblage at the waste inlet became significantly different, indicating seasonally restricted effects of the industrial emissions.     

Production of radioactive particles for use in environmental studies

This paper presents an aerosol generation technique developed to produce dry aerosol particles of various sizes from aqueous solutions of salt. The technique was tested with sodium chloride, lithium carbonate and uranyl acetate at various aqueous concentrations which produced particles in the size range of 0.13-1.37 microm Mass Median Diameter (MMD). The generated aerosols were acceptably monodisperse with a geometric standard deviation of 1.4-2. Both MMD and Mass Median Aerodynamic Diameter (MMAD) increased significantly (p<0.001) with increased concentration of the salt in solution. The technique can also be used to generate aerosols of different chemical species. The results obtained indicate that the system is convenient for use with various aerosol-forming materials, with a stable particle size distribution being maintained for a long period of steady operation. The technique was successfully applied in wind tunnel studies to simulate the release of submicron radioactive particles and their interception by crops, grass and tree canopies. The relevance and application of the technique in other areas of environmental assessment studies is discussed.     

城市街道空气中铅污染及其对机体无机盐影响的研究

本文对兰州市不同交通路口铅污染现场监测及交警人群健康体检，结果表明各路口受汽车尾气污染严重，铅浓度在１．１６～２．６４μｇ／ｍ３之间。将１２０名交警分外勤警７０人作为污染组，内勤警及户藉警５０人作为对照组，调查结果尿中δ－氨基乙酰丙酸两组比较没有统计学差异（Ｐ＞０．０５）；污染组发铅、尿铅浓度均显著高于对照组，发锌、铜、钙及血中ＩｇＡ、ＩｇＧ、ＩｇＭ均低于对照组，并具有统计学差异（Ｐ＜０．０５，Ｐ＜０．０１）。提示街道空气铅污染对交警体内无机盐水平及机体免疫能力具有一定的影响。     

沈阳市大气可吸入颗粒物水溶性组分的因子分析

选取沈阳市6个监测点位,采集2005年冬、春、夏、秋大气可吸入颗粒物样本。用安捷伦7500型电感耦合等离子体质谱仪分析PM10中19种水溶性组分。用因子分析法分析了沈阳市大气可吸入颗粒物水溶性组分的来源。     

钠盐量影响下DD6单晶高温合金的高温热腐蚀规律研究

目的 开展镍基单晶高温合金DD6在950 ℃下的热盐腐蚀试验(95%Na2SO4+5%NaCl)，探明涂盐量和涂盐方式(周期涂盐和单次涂盐)对DD6高温热腐蚀的影响规律和机理。方法 结合扫描电子显微镜、X射线能量色散谱、X射线衍射等设备，对不同涂盐量及涂盐方式下DD6的表面及横截面形貌进行观察分析，分析不同涂盐量和涂盐方式下DD6的高温热腐蚀机理。结果 DD6在950 ℃下主要发生碱性熔融热腐蚀，同时伴随氧化、硫化和氯化等过程。高温热腐蚀使得DD6合金表面生成的保护性氧化膜被熔融态的腐蚀介质破坏，导致O、S、Cl等外部元素通过氧化膜的缺陷进入DD6基体中，在合金的亚表面发生内氧化、内硫化以及内氯化反应，横截面上出现明显的腐蚀层，其主要由氧化物以及硫化物组成。随着热腐蚀的进行，DD6表面物质发生了剥蚀，沉积盐量的增加导致剥蚀现象越加严重，合金内部致密的组织结构也被破坏，横截面上出现了大量孔洞、裂纹等缺陷。在相同涂盐量下，周期涂盐法使得DD6的腐蚀程度高于单次涂盐法。结论 DD6高温热腐蚀行为与涂盐量及涂盐方式密切相关，相同涂盐方式下，涂盐量越大，DD6热腐蚀更加严重。涂盐量一定时，周期涂盐法使得DD6的热腐蚀剧烈程度大于单次涂盐法，且DD6在上述热腐蚀条件下均发生剥蚀破坏。     

水上溢油环境风险源确定研究

依据泄漏进水域的最大油品量、水域环境敏感性等两个主要因素,研究确定了江苏油田水上(临水)设施环境风险源等级,并针对不同的风险源阐述了降低风险等级的技术方法和预防措施,为加强江苏油田环境风险防患、提高应急处理能力提供了依据。     

土壤颗粒对纳米TiO_2悬浮稳定性作用机制的实验研究

在不含表面活性剂和含有表面活性剂两种条件下,研究了土壤颗粒对纳米TiO2(nTiO2)悬浮稳定性的影响.结果表明,土壤颗粒降低了nTiO2在水相中的悬浮稳定性.当体系中不含表面活性剂时,nTiO2在土壤大颗粒上的沉积是导致nTiO2脱稳沉淀的主要原因.在含有表面活性剂的溶液中,土壤颗粒降低nTiO2悬浮稳定性的作用变得更加明显了.一方面,表面活性剂加速了土壤颗粒本身的沉降从而增强了nTiO2在其中的沉降,另一方面,表面活性剂在土壤上的强烈吸附促进了表面活性剂-nTiO2在土壤上的沉积.扫描电镜显示,nTiO2不仅吸附在土壤大颗粒上,还会吸附在土壤小颗粒表面.3种表面活性剂中,十六烷基三甲基溴化铵(CTAB)悬浮的nTiO2与土壤颗粒共沉淀现象最明显.除了土壤对CTAB的吸附作用之外,XDLVO/DLVO能量计算显示CTAB体系中土壤颗粒与nTiO2之间存在显著第二极小值,表明nTiO2能够在第二极小值位置与土壤颗粒结合,从而与土壤颗粒一起快速沉淀.