长江入海口北支沿海滩涂养殖区底泥重金属污染特征及趋势评价

对长江入海口北支沿海滩涂养殖区底泥重金属污染的总体水平进行调查,结果表明,滩涂养殖区底泥重金属含量满足海洋沉积物质量一类标准要求,污染程度属于安全Ⅰ级水平,重金属潜在生态危害属轻微级别,6种重金属潜在生态危害由大到小排序依次为Cd﹥Hg﹥Cu﹥Cr﹥Pb﹥As,2005年～2011年,底泥重金属污染程度均处于安全的Ⅰ级水平。     

环境试验箱围护结构传热研究

通过对环境试验箱围护结构由高温降至低温时的非稳态传热过程建立物理模型和数学模型,并使用有限容积法及TDMA进行围护结构传热数值计算来分析3种不同降温工况下的围护结构的传热特性,提出了围护结构质量系数概念,用以简化计算其降温时的耗冷量.     

Electrochemical determination of anaerobic microbial decay coefficients

The biokinetics of attached and suspended bacteria are an essential component of activated sludge models, anaerobic digestion models and biofilm models. These parameters are often assumed or “confirmed” based on the goodness-of-fit of the bioprocess models. Using a microbial fuel cell with a baffled reactor chamber, the attached- and mixed-growth microbial decay coefficients were evaluated under anaerobic conditions. The capability for real-time voltage recording allows easy and accurate measurement of the anaerobic microbial decay coefficients (b_L, lysis-regrowth approach), which were determined to be 0.11 ± 0.01 and 0.15 ± 0.01 d⁻¹ for attached (to anode) and mixed (present in the anode chamber) growth microorganisms, respectively. The corresponding half-saturation constants using glucose as a substrate were 204 ± 10 and 123 ± 1 mg COD l⁻¹. Hence, like an oxygen uptake rate-based approach to measure the microbial kinetics under aerobic conditions, the electrochemical recording provides an attractive method to measure anaerobic microbial decay coefficients.     

Solubility of toluene, benzene and TCE in high-microbial concentration systems

We report measurements of solubility limits for benzene, toluene, and TCE in systems that contain varying levels of biomass up to 0.13 g mL⁻¹ for TCE and 0.25 g mL⁻¹ for benzene and toluene. The solubility limit increased from 21 to 48 mM when biomass (in the form of yeast) was added to aqueous batch systems containing benzene. The toluene solubility limit increased from 4.9 to greater than 20 mM. For TCE, the solubility increased from 8 mM to more than 1000 mM. Solubility for TCE (trichloroethylene) was most heavily impacted by biomass levels, changing by two orders of magnitude as the microbial concentrations approach those in biofilms.     

Laboratory longitudinal diffusion tests: 2. Parameter estimation by inverse analysis

This study focuses on the verification of test interpretations for different state analyses of diffusion experiments. Part 1 of this study identified that steady, quasi-steady and equilibrium state analyses for the through- and in-diffusion tests with solution reservoirs are generally feasible where the tracer is not highly sorptive. In Part 2 we investigate parameter identifiability in transient-state analysis of reservoir concentration variation using a numerical approach. For increased generality, the analytical models, objective functions and Jacobian matrix necessary for inverse analysis of transient-state data are reformulated using unified dimensionless parameters. In these dimensionless forms, the number of unknown parameters is reduced and a single dimensionless parameter represents the sorption property. The dimensionless objective functions are evaluated for individual test methods and parameter identifiability is discussed in relation to the sorption property. The effects of multiple minima and measurement error on parameter identifiability are also investigated. The main findings are that inverse problems for inlet and outlet reservoir concentration analyses are generally unstable and well-posed, respectively. Where the tracer is sorptive, the inverse problem for the inlet reservoir concentration analysis may have multiple minima. When insufficient measurement data is collected, multiple solutions may result and this should be taken into consideration when inversely analyzing data including that of inlet reservoir concentration. Verification of test interpretation by cross-checking different state analyses is feasible where the tracer is not highly sorptive. In an actual experiment, test interpretation validity is demonstrated through consistency between theory and practice for different state analyses.     

海南省几种草本植物微量元素的组成

海南省位于我国热带地区,草本植物微量元素组成可反映热带区域生物地球化学特点。海南植物微量元素含量属正常范围值,仅个别植物Ｃｄ、Ｈｇ含量偏高。植物Ｚｎ、Ｃｕ、Ｍｏ含量大多在５ｍｇ／ｋｇ以上,Ｐｂ、Ｃｕ、Ｃｄ含量一般低于２ｍｇ／ｋｇ,Ｈｇ、Ａｓ、Ｎｉ通常不足１ｍｇ／ｋｇ。雀稗（Ｐａｓｐａｌｕｍｃｏｍｍｅｒｓｏｎｉ）、地胆草（Ｅｌｅｐｈａｎｔｏｐｕｓｓｃａｂｅｒ）等微量元素含量普遍较高。红裂稃草（Ｓｃｈｉｚａｃｈｙｒｉｕｍｓａｎｇｕｉｎｅｕｍ）、白茅（Ｉｍｐｅｒａｔａｃｙｌｉｎｄｒｉｃａ）等微量元素含量一般较低。植物微量元素组成与植物种类及其生境条件有关。生物吸收系数反映植物摄取元素的强度,Ｍｏ、Ｃｄ、Ｈｇ、Ｚｎ、Ｃｕ的生物吸收系数通常大于１．０,属强积聚元素,Ｐｂ、Ｃｒ、Ｎｉ、Ａｓ的生物吸收系数大多低于０．３,是弱摄取元素。     

垂直面绿化植物遮阳系数与叶面积指数研究

比较、分析了农业研究中提出的叶面积指数LAI与用于建筑节能领域的垂直面绿化植物叶片遮阳系数SCPVW两个概念的异同和各自的应用范围。指出城市绿化采用水平或垂直绿化方式时,由于下垫面差异,植物叶片的遮阳系数应当分别采用LAI和SCPVW进行计算。     

CBERS-2B数据提取平原区细小地物系数的方法探讨

利用Landsat TM等中等分辨率影像对区域生态环境进行监测与评价时,由于影像分辨率的局限性,仍有许多地物无法解译出来,如农田中的道路、水渠等,文章主要研究了利用图像融合增强和人机交互式解译等技术方法,对CBERS-2B的CCD影像和HR影像进行处理,提取平原区农田中道路面积比系数,从而将农田中未解译的地物扣除。结果表明,CCD影像与HR影像经过融合增强处理后,可以进行平原地区村级及以上道路的提取。     

基于灰关联分析的天津市气溶胶消光特征研究

根据天津市秋季(2006年10月10日～20日)消光系数(bext)、PM2.5、SO2、NOX、NO2、O3质量浓度及相对湿度监测结果,利用灰色关联分析法分析大气消光系数同空气中的几种主要污染要素的相关性。结果表明,与消光系数有关的几种主要指标的灰关联度序为PM2.5NOXRHNO2O3,其中PM2.5与消光系数的灰关联系数达到0.905,远高于其他相关指标。同时对PM2.5和消光系数相关分析表明,监测期间天津市PM2.5质量消光系数为6.04m2/g。     

四川省毛河流域污染综合治理方案探讨

分析了四川省毛河流域各类污染源分布状况及水质现状,采用一维稳态单组分水质模型、多宾斯-坎普稳态模型,引入水文数据、水质监测数据、环境统计数据、社会统计公报数据,以Excel作为数据平台,对毛河水环境进行了动态模拟,反演出主要污染物降解系数。总结了毛河水环境目前存在的问题,并模拟计算了2种污染综合治理方案实施后对毛河水质的影响,确定了毛河流域水污染综合治理的重点以及制约因子。