粒状活性炭的电化学再生实验研究

研究了吸附苯酚的饱和粒状活性炭在电化学反应器中的再生实验，结果表明电化学再生活性炭是可行的。电流密度、电解时间、电解质浓度等因素是电化学再生过程的主要影响因素。     

含油污水的综合处理法及其应用

概述了竖向隔板分油法、蜂窝斜管分油法及磁性颗粒吸附过滤法 ,将这 3种方法结合处理某机修厂的含油污水 ,取得了满意效果。     

云南粳稻耐低磷特性的主基因加多基因遗传分析

磷高效水稻培育是提高土壤潜在磷利用效率的一种途径,通过对云南粳稻耐低磷特性的主基因加多基因遗传分析,可以明确耐低磷特性主基因的存在、对数及遗传效应的大小,为磷高效育种提供理论依据。本试验通过云南主栽粳稻品种合系35(Oryza sativa)与耐低磷极强早旱谷(Oryza sativa)配制P1、P2、F1、F2或F3世代,在云南省农科院进行低磷胁迫试验,对耐低磷鉴定和主基因加多基因联合遗传分析,结果表明:早旱谷的分蘖和株穗产量基因受两对主效基因 多基因相互配合遗传控制的,两对主基因间存在上位性效应,两主基因间效应差异较大。分蘖力F2主基因遗传率为58.82%~72.13%,F3主基因遗传率为45.88%~57.96%;株穗产量F2主基因遗传率60.94%~83.08%,F3主基因遗传率为62.20%~75.80%。因此育种中应当充分重视主基因的利用,利用主基因应以第一对主基因的加性效应为主,对后代耐低磷性状的选择宜从F2代开始,杂交的后期世代也要注意耐性的选择。     

细粒酒精模型冰的特征长度和变形模量

描述了细粒酒精模型冰特征长放和变形模量的测试理论基础和方法，给出了实际测量结果并该对方法存在的问题进行了讨论。简述了试验过程中发生蠕变的事实并给出最佳试验的砝码质量和试验国外还给出了特征长度，变形模量与冰密度和未冻液体含量的试验关系。     

河北邯郸钢铁冶炼区周边麦田土和小麦籽粒的多环芳烃含量及其组分谱特征

在大型邯郸钢铁公司周边不同样区的麦田成对采集表层土壤和成熟的小麦籽粒样品,检测US EPA优控的16种母体多环芳烃(polycyclic aromatic hydrocarbons,PAHs)的浓度和组分谱,确定当地麦田表土PAHs的空间分布特征、与总有机碳TOC分数的相关性.由此,初步开展PAHs源解析,并简单探讨小麦籽粒PAHs与表土PAHs的关联性.结果表明,麦田表土总PAHs平均中位数含量为398.9 ng·g-1(范围123.4~1 626.4 ng·g-1),根据丹麦的土壤质量标准,所有表土样品中PAHs总含量超过限值占18%,而苯并[a]芘含量超过限值的样品占总数的10%.表土PAHs组分谱以中、高环组分为主体.利用同分异构体特征比值进行初步源解析,显示煤与生物质燃烧和交通燃油(尾气)是当地PAHs主要混合排放源.各样区麦田表土TOC分数与PAHs总含量、与不同环数组分含量都呈现类似的显著正相关.邯郸钢铁公司周边麦田小麦籽粒的总PAHs平均中位数含量为27.0 ng·g-1(范围19.0~34.0 ng·g-1),PAHs含量较低且未超过欧盟与国内的相关食品卫生标准.小麦籽粒中优势低环组分占总体的84%,其组分谱分布与麦田表土有所不同,显示小麦籽粒的PAHs除去根部吸收、传输外,还存在大气干湿沉降通过叶表(气孔)进入小麦体内等其它输入途径.     

西昆仑山黄土1 Ma 以来的粒度变化特征及其古气候意义

塔里木盆地南缘保存有中国西北地区厚度最大的黄土,是详细研究亚洲内陆极端干旱 区以及塔克拉玛干沙漠形成演化的理想材料。但是,目前对该地区黄土堆积粒度特征系统的研 究还相对较少,对粒度指标的古环境意义仍存有不同的认识。通过对207 m 黄土岩芯的粒度分 析发现,西昆仑山黄土的粒度组成比较均一,分选较好,主要以粗颗粒物质为主,细颗粒含量 极少,并具有典型的风成成因特征。此外,西昆仑山黄土粒度1 Ma 以来呈现出持续变粗的趋势。 通过与其他气候指标的对比,这种变粗的趋势可能主要反映了中更新世以来亚洲内陆逐步增强 的干旱化过程。     

Mitigation of CO2 Emissions from the EU-15 Building Stock. Beyond the EU Directive on the Energy Performance of Buildings (9 pp)

-

Goal Scope and Background. The European Directive on Energy Performance of Buildings which came into force 16 December 2002 will be implemented in the legislation of Member States by 4 January 2006. In addition to the aim of improving the overall energy efficiency of new buildings, large existing buildings will become a target for improvement, as soon as they undergo significant renovation. The building sector is responsible for about 40% of Europe's total end energy consumption and hence this Directive is an important step for the European Union in order that it should reach the level of saving required by the Kyoto Agreement. In this the EU is committed to reduce CO2 emissions relative to the base year of 1990 by 8 per cent, by 2010. But what will be the impact of the new Directive, how large could be the impacts of extending the obligation for energy efficiency retrofitting towards smaller buildings? Can improvement of the insulation offset or reduce the growing energy consumption from the increasing installation of cooling installations? EURIMA, the European Insulation Manufacturers Association and EuroACE, the European Alliance of Companies for Energy Efficiency in Buildings, asked Ecofys to address these questions.

Methods

The effect of the EPB Directive on the emissions associated with the heating energy consumption of the total EU 15 building stock has been examined in a model calculation, using the Built Environment Analysis Model (BEAM), which was developed by Ecofys to investigate energy saving measures in the building stock. The great complexity of the EU-15 building stock had to be simplified by examining five standard buildings with eight insulation standards, which are assigned to building age and renovation status. Furthermore, three climatic regions (cold, moderate, warm) were distinguished for the calculation of the heating energy demand. This gave a basic 210 building types for which the heating energy demand and CO2 emissions from heating were calculated according to the principles of the European Norm EN 832.

Results and Discussion

The model calculations demonstrates that the main contributor to the total heating related CO2 emissions of 725 Mt/a from the EU building stock in 2002 is the residential sector (77%) while the remaining 23% originates from non-residential buildings. In the residential sector, single-family houses represent the largest group responsible for 60% of the total CO2 emissions equivalent to 435 Mt/a.

-

- The technical potential: If all retrofit measures in the scope of the Directive were realised immediately for the complete residential and non-residential building stock the overall CO2 emission savings would add up to 82 Mt/a. An additional saving potential compared to the Directive of 69 Mt/a would be created if the scope of the Directive was extended to cover retrofit measures in multi-family dwellings (200-1000m2) and non-residential buildings smaller than 1000m2 used floor space. In addition including the large group of single-family dwellings would lead to a potential for additional CO2 emission reductions compared to the Directive of 316 Mt/a.

-

- Temporal mobilization of the potential: Calculations based on the building stock as it develops over time with average retrofit rates demonstrated that regulations introduced following the EPB Directive result in a CO2 emissions decrease of 34 Mt/a by the year 2010 compared to the business as usual scenario. Extending the scope of the EPB Directive to all residential buildings (including single and multi-family dwellings), the CO2 emission savings potential over the 'business as usual' scenario could be doubled to 69 Mt/a in the year 2010. This creates an additional saving potential compared to the Directive of 36 Mt/a.

-

- Cooling demand: The analysis demonstrated that in warm climatic zones the cooling demand can be reduced drastically by a combination of lowering the internal heat loads and by improved insulation. With the reduction of the heat loads to a moderate level the cooling demand, e.g. of a terraced house located in Madrid, can be reduced by an additional 85% if the insulation level is improved appropriately.

Conclusions

This study demonstrates that the European Directive on Energy Performance of Buildings will have a significant impact on the CO2 emissions of the European building stock. The main saving potential lies in insulation of the existing building stock. Beyond this, CO2 emissions could, however, be greatly reduced if the scope of the Directive were to be extended to include retrofit of smaller buildings.

Recommendation and Perspective

The reductions should be seen in relation to the remaining gap of 190 Mt CO2 eq. per annum between the current emission levels of EU-15 and the target under the Kyoto-Protocol for the year 2010. The energy and industrial sector will probably contribute only a fraction of this reduction via the newly established EU emissions trading scheme and connected projects under the flexible mechanism. In addition, the traffic sector is likely to continue its growth path leading to a widening of the gap. Thus, there is likely to be considerable pressure on the EU building sector to contribute to the EU climate targets beyond what will be achieved by means of the current EPB Directive. Legislators on the EU and national level are therefore advised to take accelerated actions to tap the very significant emission reduction potentials available in the EU building stock.     

Determination of T‐2 toxin in grain and grain products by HPLC and TLC

Abstract

The purpose of this study was to investigate the T‐2 toxin contaminated grain and grain products consumed especially by Turkish population. The T‐2 toxin was detected using the high performance liquid chromatography (HPLC) with UV detector at 208 nm and the identify of T‐2 was further confirmed by thin layer chromatography (TLC). The recovery was 91 ±4.24% for corn flour fortified with the known amount of T‐2 toxin (1 ppm). The detection limits of T‐2 toxin for the HPLC and the TLC were 25 ng and 50 ng, respectively. A total of 30 commercially available grain and grain product samples were analyzed. Two corn flour samples were found to contain detectable levels of T‐2 toxin at a level of 1.60 ppm and 4.08 ppm.     

华北地区主要农业灾害及灾情分析

本文分析了华北地区农业灾害发生的气象背景,并利用1981～1990年的农业统计资料分析了华北地区的农业灾情状况及因灾而造成的粮、棉损失量。华北地区单位耕地面积的受灾率及成灾率分别为47.3%和23.0%,大致相当于二年一遇灾和四年一成灾。华北地区因农业灾害而造成的粮、棉损失量平均每年为397.0和34.5万吨,粮、棉损失率分别为4.9%及15.3%。     

伊犁河谷退耕还草的模式及生态经济效益探讨

退耕还林还草、进行生态环境建设是我国政府制定的一项战略性措施。伊犁河谷需要退耕还草的面积为14.13×104hm2,河谷自然地理条件较复杂,不同地域水、土、光、热条件差异较大,本文就伊犁河谷不同地域退耕还草的模式、生态经济效益及相关技术问题进行了探讨。