多环芳烃在冬小麦体内的吸收与转运及富集研究进展

多年来以煤炭为主的能源消费结构和经济社会持续发展,导致我国PAHs(多环芳烃)排放量居高不下,直接造成土壤和大气PAHs严重污染.为了探明PAHs在冬小麦体内的积累过程和调控机制,在系统分析PAHs在冬小麦体内的吸收、转运和富集的基础上,重点阐述了冬小麦PAHs根系吸收和叶面吸收影响因素方面的最新研究进展.研究发现:① 小麦根系对PAHs的吸收包括主动吸收和被动吸收两种方式,其中主动吸收是一个载体协助、消耗能量、PAHs与H+共运的过程;被动吸收除了在高等植物中普遍存在的简单扩散外,水-甘油通道也参与了该过程. ② PAHs通过气态、颗粒态沉降到小麦叶面角质层或直接通过气孔进入叶片. ③ 影响PAHs根系和叶面吸收的主要因素包括PAHs理化性质、植物生理状况、环境因素等. ④ 小麦根系吸收的PAHs可以向地上部转运,并且与辛醇-水分配系数(K_OW)、蒸腾速率、土壤中氮的形态和浓度有关.主要问题:① 对于小麦叶片吸收的PAHs向基运输机理有待进一步研究. ② 农田生态系统中冬小麦往往遭受土壤及大气双重污染,根系吸收及叶面吸收分别对其体内积累PAHs的贡献尚不清楚.因此,需关注韧皮部、木质部在PAHs转运中所起的作用;利用同位素示踪、双光子激发显微镜等先进技术观察和跟踪PAHs如何进入小麦以及在小麦叶中的转移和分布,阐明PAHs叶面吸收的微观机理;注重大田试验研究,为揭示冬小麦对PAHs的吸收、积累及调控机理,同时也为有机污染地区生产安全农产品提供重要依据.      

氯灭活地下水源中3种优势真菌的效能与机制

地下水源中真菌大量繁殖会产生嗅味,引发毒性反应以及产生大量肉眼可见的絮状物,严重影响供水水质.以地下水源中3种优势真菌木霉属、青霉属、枝孢属为研究对象,以氯为消毒剂,通过研究真菌孢子胞内物质泄漏,胞外三磷酸腺苷(ATP),脱氧核糖核酸(DNA)和蛋白质增加及孢子形态变化,探明了氯灭活3种真菌孢子的效能与机制.结果表明,氯灭活真菌孢子符合一级动力学,满足Chick模型,3种真菌的耐氯性为:木霉属青霉属枝孢属,真菌孢子尺寸越大,亲水性越强,灭活效果越好.氯灭活后,胞内物质泄漏,胞外特征物质(ATP、DNA、蛋白质)显著增加;氯对细胞表面破坏严重,灭活后真菌孢子凹陷,表面褶皱.综上所述,氯首先作用于孢子表面,降低孢子的可培养性,进一步作用使细胞的通透性屏障受损,导致胞内特征物质释放,以致孢子死亡.     

Fe-MnOx-CeO2/ZrO2低温催化还原NO性能研究

以纳米ZrO2为载体,用浸渍法制备出Fe-MnOx-CeO2/ZrO2催化剂,考察了活性组分配比和助剂负载量对催化剂低温NH3选择性催化还原NO活性的影响,并对催化剂进行了XRD、SEM、EDS和BET表征;探讨了温度、H2O和SO2对Fe-MnOx-CeO2/ZrO2催化剂低温下NH3选择性催化还原NO的影响,结果表明,无SO2和H2O条件下,8%Fe-10%MnOx-CeO2/ZrO2催化剂具有良好的催化活性和稳定性.120℃时,催化剂的脱硝效率为85.23%,当温度升至180℃时,脱硝效率可达到92.0%.SO2和H2O共存条件下,催化剂易失活,采用傅立叶变换红外光谱对各反应阶段的催化剂进行了表征,对其失活机制进行深入研究,结果表明,催化剂失活的主要原因是催化剂表面硫酸铵盐的沉积和催化剂本身活性成分的硫酸盐化.     

水溶液中臭氧和溴离子的反应研究

为探明O3氧化Br-的反应机制,采用离子色谱、PDA紫外-可见光度仪研究了水中Br-被O3氧化的反应过程.离子色谱分析表明,被氧化的Br-中只有约10%被O3氧化成BrO3-.进一步研究表明,除了生成BrO3-外,Br-被O3氧化过程中还产生了Br2,Br2又与溶液中存在的Br-结合形成Br3-,并首次得到了Br3-的吸收光谱,测得Br3-的最大吸收峰λmax为260 nm,提出了Br-与O3的基元反应.该研究补充和完善了O3氧化Br-的反应机制,也为O3处理含Br-水时Br-的归趋提供了有益信息.     

零价铁去除废水中的汞

研究了零价铁(zero-valent iron,ZVI)去除废水中Hg2+的动力学特征及其影响因素,初步探讨了ZVI与Hg2+的作用机制.结果表明,ZVI对废水中Hg2+的最佳去除条件:Hg2+的初始浓度为0.10 mg·L-1、pH为5、ZVI用量为0.050 g、温度为25℃,获得Hg2+的去除率为94.5%.ZVI对废水中Hg2+有一个快速的去除过程,可用准一级反应动力学方程描述,速率常数为0.010 min-1.ZVI去除废水中Hg2+的机制主要是氧化还原反应、铁氧化物和氢氧化物的吸附和共沉淀作用,ZVI表面钝化是降低Hg2+去除率的主要原因,其钝化成分主要是FeOOH和Fe2O3-Fe3O4.胡敏酸可与ZVI还原产生的Fe2+、Fe3+结合形成Fe-HA复合物,增加可溶性铁的比例,缓解ZVI的钝化,对细铁氧化物和铁氢氧化物胶体具有稳定作用,增强对废水中Hg2+的吸附作用.     

复合生物絮凝剂CBF-1的絮凝作用机理研究

采取PAC+絮凝剂的复配方式开展高岭土悬浊液烧杯实验,考察了复合生物絮凝剂CBF-1、CBF-1溶解物及微生物絮凝剂MBF8的絮凝特性,并借助iPDA仪分析和扫描电镜、光学显微镜观察等手段,比较分析了絮凝过程及絮体特性的差异.结果表明,各复配絮凝的浊度去除效果排序为CBF-1＞ CBF-1溶解物＞MBF8,CBF-1投加量1 mg·L-1时,浊度去除率可达到97.5％;絮体强度排序为CBF-1＞ CBF-1溶解物＞MBF8,絮体恢复因子排序为MBF8＞CBF-1溶解物＞CBF-1,絮体大小排序为CBF-1＞ CBF-1溶解物＞MBF8.单独投加PAC或投加PAC+MBF8的情况下,形成的絮体形态相对规整、密实;投加PAC+ CBF-1溶解物或投加PAC+ CBF-1形成的絮体则相对无序、疏松,CBF-1作用下絮体大、沉降快.CBF-1中高电荷MBF8组分及大分子羧甲基纤维素、羧甲基多聚糖等组分具有强的电荷中和与桥联协同增效作用;CBF-1还含有纤维素、木质素等大分子量且带多种官能团的不溶性组分,在桥联和吸附过程中也起着重要作用.     

链霉菌FX645对偶氮染料红AR30的降解机制研究

从印染厂污泥中筛选到1株对偶氮染料红30(AR30)具有较强脱色降解作用的菌株Streptomyces sp.FX645.通过降解产物的紫外-可见吸收光谱、LC-MS分析及各降解产物在发酵体系中浓度随时间变化的规律,探讨了菌株FX645对AR30的可能降解途径,首先在偶氮还原酶的作用下AR30发生偶氮键的裂解,生成4-硝基-2,6-二氯苯胺与2-[(4-胺苯基)-(2-氰乙基)-氨基]乙酸乙酯,然后分别发生硝基还原、氨基酰化、氰基水解作用,生成一系列的苯胺类化合物.     

含铬废水的处理技术及机理简述

介绍了废水中六价铬的来源及存在形态,以及处理含铬废水的物理、物化、化学及生物等各种工艺,并对各种工艺的机理和优缺点进行分析,展望含铬废水的治理前景。     

Removal of Cd2+ from water by Friedel’s salt (FS: 3CaO.Al2O3·CaCl2·10H2O): Sorption characteristics and mechanisms

The development of low-cost and efficient new mineral adsorbents has been a hot topic in recent years. In this study, Friedel’s salt (FS:3CaO·A12O3 ·CaCl2 ·10H2O), a hexagonal layered inorganic absorbent, was synthesized to remove Cd2+ from water. The adsorption process was simulated by Langmuir and Freundlich models. The adsorption mechanism was further analyzed with TEM, XRD, FT-IR analysis and monitoring of metal cations released and solution pH variation. The results indicated the adsorbent FS had an outstanding ability for Cd(Ⅱ) adsorption. The maximum adsorption capacity of the FS for Cd(Ⅱ) removal can reach up to 671.14 mg/g. The nearly equal numbers of Cd2+ adsorbed and Ca2+ released demonstrated that ion-exchange (both surface and inner) of the FS for Cd(Ⅱ) played an important role during the adsorption process. Furthermore, the surface of the FS after adsorption was microscopically disintegrated while the inner lamellar structure was almost unchanged. The behavior of Cd(Ⅱ) adsorption by FS was significantly affected by surface reactions. The mechanisms of Cd2+ adsorption by the FS mainly included surface complexation and surface precipitation. In the present study, the adsorption process was fitted better by the Langmuir isotherm model (R2 = 0.9999) than the Freundlich isotherm model (R2 = 0.8122). Finally, due to the high capacity for ion-exchange on the FS surface, FS is a promising layered inorganic adsorbent for the removal of Cd(Ⅱ) from water.     

Photocatalytic degradation of carbofuran in TiO2 aqueous solution：Kinetics using design of experiments and mechanism by HPLC/MS/MS

The photocatalytic degradation kinetics of carbofuran was optimized by central composite design based on response surface methodology for the first time. Three variables, TiO2 concentration, initial pH value and the concentration of carbofuran, were selected to determine the dependence of degradation efficiencies on independent variables. Response surface methodology modeling results indicated that the degradation efficiency of carbofuran was highly affected by the initial pH value and the concentration of carbofuran. Then nine degradation intermediates were detected by HPLC/MS/MS. The Frontier Electron Densities of carbofuran were calculated to predict the active sites on carbofuran attacked by hydroxyl radicals and photoholes. Point charges were used to elucidate the chemisorption pattern on TiO2 catalysts during the photocatalytic process. By combining the experimental results and calculation data, the photocatalytic degradation pathways of carbofuran were proposed, including the addition of hydroxyl radicals and the cleavage of the carbamate side chain.