Determination of toxic elements in waters and sediments from River Subin in the Ashanti Region of Ghana

Waters and sediments of Subin River, which flows through the industrial and commercial areas of Kumasi in the Ashanti region of Ghana, were geochemically investigated to ascertain heavy metal pollution levels due to anthropogenic activities. The study shows preoccupying pollution levels that constitute a threat to public and ecological systems. The waters of Subin River are neutral to slightly basic, inferred from pH values of 6.89–7.65). Electric conductivity (EC) of the waters ranges from 822 to 1,821 μs/cm and the range of total dissolved solids (TDS) is from 409 to 913 mg/l. Toxic elements contents of sediments and waters from 10 sites along the river were analysed by instrumental neutron activation analysis (INAA), and Al, As, Cd, Cr, Cu and Zn were determined. The concentrations of Al, As, Cd, Cr, Cu and Zn in the waters range between 4.02–15.18, 0.007–0.16, 0.002–0.05, 0.001–0.019, 1.32–7.04 and 4.28–10.2 mg/l, respectively. The contamination factors (CF) computed for the elements indicate that with the exception of sampling site S10, the sediments are polluted with Cd. Chromium contamination in the sediments is observed at S6 and S7, where the CF values were 1.39 and 1.52, respectively. The pollution load indices (PLI) were low (<1) and ranged from 0.14 to 0.75, suggesting that the overall sediment column of the river is not polluted.     

Step-up multiple regression model to compute Chlorophyll a in the coastal waters off Cochin, southwest coast of India

The interaction effects of abiotic processes in the production of phytoplankton in a coastal marine region off Cochin are evaluated using multiple regression models. The study shows that chlorophyll production is not limited by nutrients, but their physiological regulations (responses to nutrients, pH, temperature and salinity) are mainly responsible for the increased biological production. The model explaining 77% of variability for chlorophyll a production is indicative of preconditioning of the coastal waters. The phytoplankton production is found to be sensitive to the environment, which varies seasonally. Further, the study suggests that supply of organic matter and grazing of zooplankton (not included) would improve the model efficiency. Despite this, the good agreement in the computed and measured chlorophyll a values shows that step-up multiple regression model is a useful tool to understand the influence of environmental variables on the production of phytoplankton in these coastal waters.     

利用空气自动监测车仪器对空气自动监测站仪器进行质量保证及质量控制的可行性分析

通过对辖区内空气自动监测车仪器与4家公司空气自动监测站仪器的比对分析,得出了空气自动监测车仪器与空气自动监测站仪器的PM10、SO2、NO2相对误差分别为:-32.8%、4.4%、-8.7%,仪器之间显现出良好的线性关系,从比对结果来看,利用空气自动监测车对空气自动监测站进行质量保证和质量控制是可行的.     

A New Approach to Plant Diversity Assessment Combining HPLC Data, Simplex Mixture Design and Discriminant Analysis

The quantitative assessment of plant diversity and its monitoring with time represent a key environmental issue for management and conservation of natural resources. Assessment of plant diversity could be based on chemical analyses of secondary metabolites (e.g. flavonoids, terpenoids), because of the substantial quantitative and qualitative between-individual variability in such compounds. At a geographical scale, the plant populations become widely dispersed, and their monitoring from numerous routine individual analyses could become restricting. To overcome such constraint, this study develops a multivariate calibration model giving the relative frequency of a particular taxon from a simple high-performance liquid chromatography (HPLC) analysis of a plant mixture. The model was built from a complete set of mixtures combining different taxons, according to an experimental design (Scheffé’s matrix). For each mixture, a reference HPLC pattern was simulated by averaging the individual HPLC profiles of the constitutive taxons. The calibration models, based on Bayesian discriminant analysis (BDA), gave statistical relationships between the contributions of each taxon in mixtures and reference HPLC patterns of these mixtures. Finally, these models were validated on new mixtures by using outside plants. This new biodiversity survey approach is illustrated on four chemical taxons (four chemotypes) of Astragalus caprinus (Fabaceae). The more differentiated the taxon, the better predicted its contributions (in mixtures) were by BDA calibration model. This new approach could be very useful for a global routine survey of plant diversity.     

大气压光电离技术及其在环境污染物分析中的应用

介绍了液相色谱-质谱联用(LC-MS)技术中新型软电离技术大气压光电离法(APPI)的基本原理、鼻子源结构以及电离的影响因素,综述了LC-APPI-MS在环境污染物定性定量分析中的应用.     

环境气体标准样品量值的计算及不确定度分析

依据《气体分析校准气体混合物的制备重量法》（1SO6142—2001）和《气体分析气体标准样品组成的测定和校验比较法》（ISO6143—2001）,阐述了环境气体标准样品不同定值方法的量值计算及不确定度来源,并比较了同一气体标准样品采用不同定值方法得到的不同量值结果及不确定度：     

1976-2005年唐山地区降水变化规律及干旱预测

利用唐山市1976-2005年各县年降水序列,分析了该市降水的空间分布规律和时间变化特点。采用灰色系统的灾变预测方法,对各县分别建立了GM（1,1）模型,进行未来25年唐山市各站的干旱年预测。利用残差检验、后验差检验和关联度检验对各模型分别进行了精度检验。结果表明,预测模型精度较高,可以对唐山市各县未来的干旱年进行预测,从而为科学决策提供依据。     

IFTCIP: An Integrated Optimization Model for Environmental Management under Uncertainty

In this study, an interval-fuzzy two-stage chance-constrained integer programming (IFTCIP) method is developed for supporting environmental management under uncertainty. The IFTCIP improves upon the existing interval, fuzzy, and two-stage programming approaches by allowing uncertainties expressed as probability distributions, fuzzy sets, and discrete intervals to be directly incorporated within a general mixed integer linear programming framework. It has advantages in uncertainty reflection, policy investigation, risk assessment, and capacity-expansion analysis in comparison to the other optimization methods. Moreover, it can help examine the risk of violating system constraints and the associated consequences. The developed method is applied to the planning for facility expansion and waste-flow allocation within a municipal solid waste management system. Violations of capacity constraints are allowed under a range of significance levels, which reflects tradeoffs between the system cost and the constraint-violation risk. The results indicate that reasonable solutions for both binary and continuous variables have been generated under different risk levels. They are useful for generating desired decision alternatives with minimized system cost and constraint-violation risk under various environmental, economic, and system-reliability conditions. Generally, willingness to take a higher risk of constraint violation will guarantee a lower system cost; a strong desire to acquire a lower risk will run into a higher system cost.     

Principal component analysis for soil contamination with organochlorine compounds

In order to investigate the distribution pattern of individual organochlorine compounds in soil samples collected from the sites (Canary Island – Spain, China, Germany, India, Romania, Russia, Serbia, Swiss, UK) affected by industrial activities to the more remote areas, principal component analysis was performed on the data taken from literature. Loading plots pointed out the strong correlation among the variables. Score plots revealed similar PCB- and OCP-soil patterns for majority of the investigated sites. Nevertheless, the temporal differences of PCB-soil loads have been identified: the late 1990s and early 2000s concentrations are similar to those of the early 1940s, and they are below the levels existed in 1980. The most pronounced PCB concentrations characterized the soil from 1966. For OCPs the influence of sites location on the detected concentration has been revealed: China and India were characterized by comparably higher loads of DDX (DDT and its metabolites) and of HCH-isomers, respectively.     

Effects of sewage sludge blending on the coal combustion: a thermogravimetric assessment

Combustion of urban sewage sludge together with coal in existing infrastructures may be a sustainable management option energetically interesting for these materials, usually considered wastes. Thermogravimetric analysis was used to study the combustion of a semianthracite coal and the modifications undergone when adding a small percentage (2%, 5%, 10%) of sewage sludge. Both Differential Scanning Calorimetric analysis and Differential Thermogravimetry burning profiles showed differences between coal and sewage sludge combustion. However, the effects of adding a percentage of sewage sludge equal or smaller than 10% was hardly noticeable in terms of heat release and weight loss during the coal combustion. This was further proved by non-isothermal kinetic analysis, which was used to evaluate the Arrhenius activation energy corresponding to the co-combustion of the blends. This work shows that thermogravimetric analysis may be used as an easy rapid tool to asses the co-combustion of sewage sludge together with coal.