Effects of of V,Cr single and combined stress on the growth and physiological characteristics of wheat seedling

采用水培法研究了V（Ⅴ）、Cr（Ⅵ）单一及复合胁迫对小麦幼苗生长和生理特性的影响.结果表明,无论单一或复合胁迫,随着V、Cr浓度的增加,小麦幼苗鲜重、株高、叶绿素含量均呈先上升后下降的趋势.当V≤5 mg.L-1、Cr≤10 mg.L-1,小麦的鲜重、株高、叶绿素含量均高于对照,当V〉5 mg.L-1、Cr〉10 mg.L-1,则分别比对照降低0.2%—46.8%、0.8%—40.7%和2.5%—76.9%.丙二醛含量随着V、Cr胁迫浓度的增加而增大,与对照相比,含量增加了7.5%—251.6%.在V、Cr单一胁迫下,随着金属浓度增加细胞膜透性增大,比对照增加17.8%—59.8%,根系活力则下降8.1%—53.0%;复合胁迫时细胞膜透性先下降后上升,但始终高于对照,比对照增加了0.6%—126.2%;根系活力呈先升高后下降的趋势,降低6.1%—97.3%.研究表明在低浓度范围,复合胁迫在一定程度上可以缓解单一金属对小麦的毒害,对小麦幼苗生长具有拮抗作用;在高浓度范围两种金属复合胁迫对小麦幼苗的损伤和毒害作用比单一金属伤害更为严重,表现为协同作用.单一胁迫中Cr对小麦幼苗的毒性比V大.     

软、硬煤层残余瓦斯含量区域效果检验临界值研究

针对软、硬煤层瓦斯含量区域突出危险性效检指标临界值存在较大差异这一工程实际。建立软、硬煤样相关参数关系模型,对基于残余瓦斯含量的区域防突措施效果检验指标临界值进行研究。结果表明:同一煤质软煤和硬煤瓦斯吸附量差别不大,但随着煤的变质程度降低,软、硬煤瓦斯吸附量差值先减小后增大。对存在软、硬分层的煤层,建议采用0.74MPa时软、硬煤瓦斯含量测值的小值（取整）作为煤层残余瓦斯量指标的临界值。此研究因地制宜地确定符合矿井实际的突出预测指标临界值和区域措施效果检验指标临界值,对降低防突成本具有重要意义。     

Biosorption potential of Cr(VI) by Kocuria sp. ASB107, a radio-resistant bacterium isolated from Ramsar,Iran

Heavy metal pollution in soil and wastewater is a worldwide environmental issue in which microorganisms play a significant role for its removal. In the present study, biosorption of Cr(VI) by the live and dead cells of Kocuria sp. ASB107, a radio-resistant bacterium, was investigated. The effect of contact time, solution pH, initial hexavalent chromium concentration and adsorbent dose on biosorption efficiency was studied. Also, live cells were further immobilised on various matrices by different techniques and then were examined for tolerance to chromium biosorption. Experimental results indicated that the removal efficiency of chromium increased with decrease in pH, initial Cr(VI) concentration, and also increase in adsorbent dose and the contact time. The maximum removal efficiency of live and dead cells at acidic pH of 4–4.5, contact time of 24 hours, adsorbent dose 1.6?g/100?mL and initial chromium concentration 25?mg/L were 82.4% and 69.2%, respectively. The adsorption data was described well by Langmuir isotherm model. Among all immobilisation techniques tested, cross-linking showed the highest biosorption of Cr(VI). Results indicated that live cells of Kocuria sp. ASB107 were better than dead ones.     

2种原煤样渗透性对比试验研究

为了研究构造煤原煤样与硬煤原煤样渗透率变化规律的异同,用三轴渗流装置对2种原煤样进行了瓦斯渗透性试验。在改变单一因素条件下,分别研究围压和瓦斯压力对2种煤样渗透性的影响,同时研究轴压加载及卸载过程中2种原煤样的渗透率变化规律。结果表明;瓦斯压力恒定时,2种煤样的渗透率都随围压的增大而减小;围压恒定时,瓦斯压力在0.2~0.6 MPa范围内,2种煤样的渗透率都随瓦斯压力增大而减小;瓦斯压力及围压同时保持恒定时,2种煤样的渗透率都随轴压增大不断减小,2种煤样在卸载阶段渗透率均不断增大,但均没有恢复到加载前的渗透率,构造煤煤样渗透率恢复率比硬煤小,说明构造煤加载过程中发生塑性破坏比例大于硬煤。     

固体废物六价铬分析样品碱消解快速前处理方法

提出一种固体废物六价铬分析样品快速前处理方法,其消解条件、样品分析与现行国家标准方法相同,不同的是,样品消解后,用离心方法替代过滤方法,能实现样品的快速、准确分析。     

Biosorption of Cr(III) from aqueous solution by freeze-dried activated sludge: Equilibrium,kinetic and thermodynamic studies

Batch biosorption experiments were conducted to remove Cr(III) from aqueous solutions using activated sludge from a sewage treatment plant. An investigation was conducted on the effects of the initial pH, contact time, temperature, and initial Cr(III) concentration in the biosorption process. The results revealed that the activated sludge exhibited the highest Cr(III) uptake capacity (120 mg·g⁻¹) at 45°C, initial pH of 4, and initial Cr(III) concentration of 100 mg·L⁻¹. The biosorption results obtained at various temperatures showed that the biosorption pattern accurately followed the Langmuir model. The calculated thermodynamic parameters, ΔG^o (−0.8– −4.58 kJ·mol⁻¹), ΔH^o (15.6–44.4 kJ·mol⁻¹), and ΔS^o (0.06–0.15 kJ·mol⁻¹·K⁻¹) clearly indicated that the biosorption process was feasible, spontaneous, endothermic, and physical. The pseudo first-order and second-order kinetic models were adopted to describe the experimental data, which revealed that the Cr(III) biosorption process conformed to the second-order rate expression and the biosorption rate constants decreased with increasing Cr(III) concentration. The analysis of the values of biosorption activation energy (E_a = −7 kJ·mol⁻¹) and the intra-particle diffusion model demonstrated that Cr(III) biosorption was film-diffusion-controlled.     

六价铬还原细菌Bacillus cereus S5.4还原机理及酶学性质研究

从宝钢电镀污泥中分离得到1株六价铬还原细菌Bacillus cereus S5.4,在液体LB培养基中培养72　h完全还原2　mmol/L Cr⁶⁺.测定该菌株六价铬还原后细胞内外六价铬和总铬浓度,检测细胞各组分六价铬还原能力,并结合扫描电镜分析六价铬还原前后细胞形态的变化.结果表明,细菌的细胞壁膜能阻止六价铬进入细胞,是六价铬发生还原的主要场所,其通透性的改变将影响六价铬还原酶的作用;该菌株六价铬还原酶为非分泌型,在细菌细胞内侧发生作用.测定六价铬还原酶活性和稳定性：其最适温度范围25～37℃,最适pH 7,Cu2＋有增强六价铬还原酶活性的作用;在37℃,该菌株六价铬还原酶K_m为125.61 μmol/L,V_max为7.68 nmol/(min·mg).     

腐殖酸吸附Cr(Ⅵ)的对比实验研究

研究了未处理的腐殖酸(HA)和不溶性腐殖酸(IHA)对Cr(Ⅵ)的吸附作用.进行了反应时间、pH值、IHA投加量、温度等对去除效率的影响研究,确定了两种吸附剂最佳反应条件,并通过对比实验,分析了两种吸附剂吸附Cr(Ⅵ)的特点.实验表明,HA达到最大吸附量时所需要的反应时间(180 min左右)远远高于IHiA的反应时间...     

化学还原法处理电镀含铬废水的工程应用

用亚硫酸氢钠作还原剂处理含铬电镀废水时,不调节废水pH值会出现暂时定性检测不含六价铬的假象,过一段时间废水中又会出现六价铬,导致排水不达标.针对这一现象进行实验和工程实践,结果表明,不调节pH值增加亚硫酸氢钠的投加量和不增加亚硫酸氢钠投加量而pH值调节到3～4都能使处理后水质稳定,达到排放标准(GB21900-2008...     

Al2O3/Ni-P-SiC复合涂层组织与性能的研究

目的 采用化学复合镀技术对微弧氧化进行封孔,进而得到抗烧蚀性能优良的Al2O3/Ni-P-SiC复合涂层。方法 通过采用扫描电镜(SEM)、光学金相显微镜(OM)、显微硬度仪(Microhardness Tester)、X射线衍射仪(XRD)、氧–乙炔烧蚀试验(Oxy-Acetylene Ablation Test)等方法,对复合涂层的表面形貌、截面形貌、厚度、显微硬度、物相和抗烧蚀性能等进行分析。结果 陶瓷层原始表面完全被化学镀层覆盖,所制得的复合涂层厚度均匀,化学镀层与陶瓷层紧密嵌合。镀液中的SiC浓度对镀覆的速度、镀层中SiC粒子的共沉积量有着较大的影响。当粒子质量浓度为16~20 g/L时,颗粒的共沉积量较大。化学复合镀60 min可以得到厚度20 μm左右的Ni-P-SiC镀层,SiC颗粒分布均匀。当镀液中SiC质量浓度为16 g/L时,镀层具有最高的硬度。对比未处理、仅微弧氧化和Al2O3/Ni-P-SiC复合涂层试样,Al2O3/Ni-P-SiC复合涂层试样具有最佳的抗烧蚀性能。结论 Al2O3/Ni-P-SiC复合涂层均匀、致密,具有良好的抗烧蚀。