2种原煤样渗透性对比试验研究

为了研究构造煤原煤样与硬煤原煤样渗透率变化规律的异同,用三轴渗流装置对2种原煤样进行了瓦斯渗透性试验。在改变单一因素条件下,分别研究围压和瓦斯压力对2种煤样渗透性的影响,同时研究轴压加载及卸载过程中2种原煤样的渗透率变化规律。结果表明;瓦斯压力恒定时,2种煤样的渗透率都随围压的增大而减小;围压恒定时,瓦斯压力在0.2~0.6 MPa范围内,2种煤样的渗透率都随瓦斯压力增大而减小;瓦斯压力及围压同时保持恒定时,2种煤样的渗透率都随轴压增大不断减小,2种煤样在卸载阶段渗透率均不断增大,但均没有恢复到加载前的渗透率,构造煤煤样渗透率恢复率比硬煤小,说明构造煤加载过程中发生塑性破坏比例大于硬煤。     

Biosorption of Cr(III) from aqueous solution by freeze-dried activated sludge: Equilibrium,kinetic and thermodynamic studies

Batch biosorption experiments were conducted to remove Cr(III) from aqueous solutions using activated sludge from a sewage treatment plant. An investigation was conducted on the effects of the initial pH, contact time, temperature, and initial Cr(III) concentration in the biosorption process. The results revealed that the activated sludge exhibited the highest Cr(III) uptake capacity (120 mg·g⁻¹) at 45°C, initial pH of 4, and initial Cr(III) concentration of 100 mg·L⁻¹. The biosorption results obtained at various temperatures showed that the biosorption pattern accurately followed the Langmuir model. The calculated thermodynamic parameters, ΔG^o (−0.8– −4.58 kJ·mol⁻¹), ΔH^o (15.6–44.4 kJ·mol⁻¹), and ΔS^o (0.06–0.15 kJ·mol⁻¹·K⁻¹) clearly indicated that the biosorption process was feasible, spontaneous, endothermic, and physical. The pseudo first-order and second-order kinetic models were adopted to describe the experimental data, which revealed that the Cr(III) biosorption process conformed to the second-order rate expression and the biosorption rate constants decreased with increasing Cr(III) concentration. The analysis of the values of biosorption activation energy (E_a = −7 kJ·mol⁻¹) and the intra-particle diffusion model demonstrated that Cr(III) biosorption was film-diffusion-controlled.     

吉林省主要覆膜作物地膜残留情况调查

通过文献调研、问卷调查和典型样点采集的方法对吉林省3种主要覆膜作物的地膜残留情况进行调查分析,结果表明：地膜残留量与覆膜年限、地膜回收方式以及种植作物种类密切相关。随覆膜时间的延长地膜残留量有增加的趋势。3种模式地膜残留量由高到低为：瓜菜模式〉玉米连作模式〉花生连作模式,连续覆膜10年,3种模式的地膜残留量分别为30、28.35 kg·hm^-2和15.9kg·hm^-2。以一级污染水平作为标准（75 kg·hm^-2）,覆膜量每年按75～150 kg·hm^-2、年残留率按1.2%～4.02%计,估算吉林省安全使用地膜的年限约为12～83年。     

铸造废砂／废地膜／粘附土三元复合体系的研究

通过X射线衍射分析、红外光谱分析、热分析、电镜及能谱分析、图像分析,可以判断废旧地膜上粘附土的主要矿物质是结晶二氧化硅（粉粒级石英）,它们与聚合物基废弃物复合材料中作为填料的铸造石英砂的性状类同。废旧地膜可以不经清洗,直接与铸造废砂制备复合材料,这可大大降低复合材料的加工成本。这种复合材料实际上是由基体PE、粘附土中大量的SiO2和铸造石英砂SiO2组成的三元复合体系。     

Effect of environmental parameters on the degradability of polymer films in laboratory-scale composting reactors

Previous research in our laboratory reported a convenient laboratory-scale composting test method to study the weight loss of polymer films in aerobic thermophilic (53°C) reactors maintained at a 60% moisture content. The laboratory-scale compost reactors contained the following synthetic compost mixture (percentage on dry-weight basis): tree leaves (45.0), shredded paper (16.5), food (6.7), meat (5.8), cow manure (17.5), sawdust (1.9), aluminum and steel shavings (2.4), glass beads (1.3), urea (1.9), and a compost seed (1.0) which is designated Mix-1 in this work. To simplify the laboratory-scale compost weight loss test method and better understand how compost mixture compositions and environmental parameters affect the rate of plastic degradation, a systematic variation of the synthetic mixture composition as well as the moisture content was carried out. Cellulose acetate (CA) with a degree of substitution (DS) value of 1.7 and cellophane films were chosen as test polymer substrates for this work. The extent of CA DS-1.7 and cellophane weight loss as a function of the exposure time remained unchanged when the metal and glass components of the mixture were excluded in Mix-2. Further study showed that large variations in the mixture composition such as the replacement of tree leaves, food, meat, and sawdust with steam-exploded wood and alfalfa (forming Mix-C) could be made with little or no change in the time dependence of CA DS-1.7 film weight loss. In contrast, substituting tree leaves, food, meat, cow manure, and sawdust with steam-exploded wood in combination with either Rabbit Choice (Mix-D) or starch and urea (Mix-E) resulted in a significant time increase (from 7 to 12 days) for the complete disappearance of CA DS-1.7 films. Interestingly, in this work no direct correlation was observed between the C/N ratio (which ranged from 13.9 to 61.4) and the CA DS-1.7 film weight loss. Decreasing moisture contents of the compost Mix-2 from 60 and 50 and 40% resulted in dramatic changes in polymer degradation such that CA DS-1.7 showed an increase in the time period for a complete disappearance of polymer films from 6 to 16 and 30 days, respectively.Guest Editor: Dr. Graham Swift, Rohm & Haas.Paper presented at the Bio/Environmentally Degradable Polymer Society—Second National Meeting, August 19–21, 1993, Chicago, Illinois.     

载体好氧预挂膜处理对厌氧生物颗粒性能的影响

研究了生物膜载体经好氧预挂膜处理对厌氧附着膜膨胀床(AAFEB)反应器中生物颗粒性能的影响.载体经10 d好氧预挂膜处理后,形成了7～8 μm厚的生物膜,在起动运行过程中,处理反应器中载体的挂膜进程比对照要快.在整个运试期间,处理反应器中的生物膜厚度和污泥浓度值均高于对照.前者厌氧生物颗粒致密、结实,生物膜结构良好,滞留于反应器中的性能较佳,比后者较不宜随水流失.处理反应器厌氧生物颗粒的一些性能指标值,如最大比产酸活性、最大比产甲烷活性、脱氢酶活性、辅酶F₄₂₀含量等均高于对照.另外,厌氧生物颗粒内微生物相也有明显的差异.      

渗水地膜与旱地农业

经过对地膜物料结构的深入研究，提出了单向渗水原理，设计并发明了渗水地膜。渗水地膜具有保温、调温、渗水、保水、微通气等多种功能，可使半干旱地区发生频率为７０％左右、年累计量为１００～１５０ｍｍ的小雨量资源得到开发利用。旱地试验表明：渗水地膜覆盖的粮食作物比常规地膜覆盖的增产１５７％～３８３％，比无覆盖的增产１倍以上。     

黄土高原半干旱区覆膜玉米土壤温度的变异特征

黄土高原半干旱丘陵山区受特殊的地理、地形以及水文气象条件的影响,造成农业生产播种难、出苗率低等问题,严重制约着农业的发展,但通过覆膜坐水技术能够起到抗旱保墒、提高地温、改善土壤肥效等作用。以哲单7号玉米ZeamaysL为供试品种,在设置对比试验小区（覆膜与不覆膜）的基础上,通过分析覆膜玉米土壤温度变异特征,描述了覆膜后增温、提墒、增产的过程,研究结果表明：覆膜处理与不覆膜处理相比,增温最明显的时期出现在出苗到拔节阶段,且10cm．和20cm处的温差表现为最大,可增温2．5℃左右,而后期增温减慢,播种后覆膜增温为玉米发芽生长提供了良好的生长环境,大大提高了出苗率,为作物节水增产提供了必要条件。     

CS/PEG/PFT膜制备及对含铜废水的处理

实验将溶胶凝胶法和高分子辅助倒相法结合,制备出一种新型的壳聚糖/聚乙二醇/亚铁氰化钾钛(CS/PEG/PFT)复合膜,通过FT-IR和SEM对膜进行表征后,将其用于模拟铜废水的吸附和脱附实验,并探究出膜吸附的最佳工艺条件为:pH 5.50、实验温度55℃、实验时间2 h,该条件下,膜对铜离子最大吸附量为9.85 mg/g,去除率达到95%以上。CS/PEG/PFT膜的除铜过程符合Langmuir等温吸附方程(y=0.0597x+0.0168),线性相关度达到0.9917。     

Effect of fatty acids and oils on photodegradation of azadirachtin‐A

Abstract

Azadirachtin‐A on exposure to UV‐light (254 nm) as a thin film on glass surface gave a isomerised (Z)‐2‐ methylbut‐2‐enoate product. Half‐life of azadirachtin‐A as thin film under UV light was found to be 48 min. Azadirachtin ‐A was irradiated along with saturated and unsaturated fatty acids, and fatty oils under ultra‐violet light as thin film. Saturated fatty acid increased the rate of photodegradation of azadirachtin‐A, whereas unsaturated fatty acids such as oleic, linoleic and elaidic acid reduced the rate of degradation. Castor, linseed and olive oil accelerated the rate of degradation, whereas neem oil showed no or little change in the rate of degradation of azadirachtin‐A. None of these fatty acids and fatty oils were effective in controlling the rate of degradation of azadirachtin‐A under UV‐light as thin film.