安全降变原理及C-S-R事故致因新模型

为发展安全科学原理和给事故防控与调查提供新的方法,根据变化对系统安全的影响机制,开展安全降变原理及事故致因新模型研究。首先,提出安全降变原理并解析其内涵及研究意义。其次,基于安全降变原理,给出不同层级安全系统变化的分类实例,并对作业场所事故及其致因重新定义和分类。再次,构建基于安全降变原理的C-S-R事故致因新模型。最后,基于事故案例分析,验证所提出的C-S-R事故致因新模型与安全降变原理的有效性。结果表明,各级安全系统中自发或是受联动的变化超出系统的变化承受水平时,将导致事故的发生。经事故案例分析验证可知,安全降变原理及C-S-R事故致因新模型具有充分的实用性。     

2016—2020年全国化工和危险化学品事故分析研究*

为分析“十三五”期间（2016—2020年）我国化工和危险化学品事故发生情况，统计“十三五”期间化工和危险化学品事故数量及死亡人数，从发生月份、发生区域、行业分布等方面分析事故特征，从事故类别、事故环节、关键作业等方面分析事故原因，总结2011—2020年我国化工和危险化学品事故发展趋势，按照全国4大经济区域研究2013—2020年事故特征。结果表明:“十三五”期间我国化工和危险化学品事故数量呈下降趋势，死亡人数出现波动，总体形势较为平稳。2011—2020年化工和危险化学品事故风险向中西部转移趋势明显，东北、西部地区事故死亡率普遍高于东部地区。研究结果可为相关行业从业者及监管部门提供决策参考。     

Pyrolysis and catalytic pyrolysis as a recycling method of waste CDs originating from polycarbonate and HIPS

Pyrolysis appears to be a promising recycling process since it could convert the disposed polymers to hydrocarbon based fuels or various useful chemicals. In the current study, two model polymers found in WEEEs, namely polycarbonate (PC) and high impact polystyrene (HIPS) and their counterparts found in waste commercial Compact Discs (CDs) were pyrolysed in a bench scale reactor. Both, thermal pyrolysis and pyrolysis in the presence of two catalytic materials (basic MgO and acidic ZSM-5 zeolite) was performed for all four types of polymers. Results have shown significant recovery of the monomers and valuable chemicals (phenols in the case of PC and aromatic hydrocarbons in the case of HIPS), while catalysts seem to decrease the selectivity towards the monomers and enhance the selectivity towards other desirable compounds.     

超高强度钻杆低温断裂性能及裂纹扩展特征研究

超高强度钻杆在冬季低温环境下容易发生脆性断裂事故,为了从断裂力学角度揭示其冷脆现象的本质,采用ZBC2302-D型示波冲击试验机,获得了不同温度下超高强度钢在冲击断裂过程中的力-位移曲线,并对比分析了冲击功、起裂功和裂纹扩展功之间的变化关系。采用国家标准GB 4161—2007中的计算公式,计算了冲击试样的裂纹扩展量Δa和阻抗应力强度因子K_R;同时,引入K_R阻力曲线,得到超高强度钻杆在不同温度下的剩余强度图。结果表明,当冲击试样开始出现裂纹时,随温度降低,钻杆的初始起裂应力有所增加,出现硬化现象。当钻杆出现一定长度的裂纹时,随温度降低,阻抗应力强度因子越来越小,而且降低速度越来越快,剩余强度也表现出相同的变化趋势。随温度降低,材料抵抗裂纹扩展的能力逐渐下降,表明钻杆在低温下更容易断裂。     

三种强度准则的盐穴应力弹塑性解及参数敏感性分析

为了更安全地建造地下盐穴储气库，采用Hoek-Brown(H-B)，Mohr-Coulomb(M-C)及Drucker-Prager(D-P)3种强度准则，推导了在内压作用下盐穴的塑性区应力解及塑性半径，讨论了各准则对塑性区半径的影响规律及各准则参数的估计方法。分别运用单因素分析法及多因素分析法，分析了塑性半径对H-B准则参数的敏感性。研究结果表明:同等条件下，H-B准则受岩性、造腔等因素影响时，微小内压的波动使得塑性半径的变化更剧烈，岩体质量较差时更显著。盐穴塑性应力与M-C，D-P相比偏小，更接近实际工程状况。围岩塑性半径受H-B准则参数影响程度的大小依次为:GSI，mi，σci，D。各参数的互相关性对结果影响不大。其中，H-B准则参数GSI，mi，σci的增大会使塑性半径减小，参数D的增大使得塑性区半径增大。研究成果可为合理选择盐穴储库硐室的力学模型及优化参数提供参考价值。     

The potential of vehicle and road infrastructure interventions in fatal bicyclist accidents on Swedish roads—What can in-depth studies tell us?

Abstract

Objective: The objective of this article is to describe the characteristics of fatal crashes with bicyclists on Swedish roads in rural and urban areas and to investigate the potential of bicycle helmets and different vehicle and road infrastructure interventions to prevent them. The study has a comprehensive approach to provide road authorities and vehicle manufacturers with recommendations for future priorities.

Methods: The Swedish Transport Administration’s (STA) in-depth database of fatal crashes was used for case-by-case analysis of fatal cycling accidents (2006–2016) on rural (n?=?82) and urban (n?=?102) roads. The database consists of information from the police, medical journals, autopsy reports, accident analyses performed by STA, and witness statements. The potential of helmet use and various vehicle and road infrastructure safety interventions was determined retrospectively for each case by analyzing the chain of events leading to the fatality. The potential of vehicle safety countermeasures was analyzed based on prognoses on their implementation rates in the Swedish vehicle fleet.

Results: The most common accident scenario on rural roads was that the bicyclist was struck while cycling along the side of the road. On urban roads, the majority of accidents occurred in intersections. Most accidents involved a passenger car, but heavy trucks were also common, especially in urban areas. Most accidents occurred in daylight conditions (73%). Almost half (46%) of nonhelmeted bicyclists would have survived with a helmet. It was assessed that nearly 60% of the fatal accidents could be addressed by advanced vehicle safety technologies, especially autonomous emergency braking with the ability to detect bicyclists. With regard to interventions in the road infrastructure, separated paths for bicyclists and bicycle crossings with speed calming measures were found to have the greatest safety potential. Results indicated that 91% of fatally injured bicyclists could potentially be saved with known techniques. However, it will take a long time for such technologies to be widespread.

Conclusions: The majority of fatally injured bicyclists studied could potentially be saved with known techniques. A speedy implementation of important vehicle safety systems is recommended. A fast introduction of effective interventions in the road infrastructure is also necessary, preferably with a plan for prioritization.     

The city as a refuge for insect pollinators

Research on urban insect pollinators is changing views on the biological value and ecological importance of cities. The abundance and diversity of native bee species in urban landscapes that are absent in nearby rural lands evidence the biological value and ecological importance of cities and have implications for biodiversity conservation. Lagging behind this revised image of the city are urban conservation programs that historically have invested in education and outreach rather than programs designed to achieve high‐priority species conservation results. We synthesized research on urban bee species diversity and abundance to determine how urban conservation could be repositioned to better align with new views on the ecological importance of urban landscapes. Due to insect pollinators’ relatively small functional requirements—habitat range, life cycle, and nesting behavior—relative to larger mammals, we argue that pollinators put high‐priority and high‐impact urban conservation within reach. In a rapidly urbanizing world, transforming how environmental managers view the city can improve citizen engagement and contribute to the development of more sustainable urbanization.     

Parks versus PES: Evaluating direct and incentive-based land conservation in Mexico

Protected areas (PAs) and payments for ecosystem services (PES) are the top two mechanisms available for countries to achieve international REDD agreements, yet there are few empirical comparisons of their effects. We estimate the impacts of PAs and PES on forest conservation, poverty reduction, and population change at the locality level in Mexico in the 2000s. Both policies conserved forest, generating an approximately 20–25% reduction in expected forest cover loss. PES created statistically significant but small poverty alleviation while PAs had overall neutral impacts on livelihoods. Estimates by individual policy type for the same level of deforestation risk indicate that biosphere reserves and PES balanced conservation and livelihood goals better than strict protected areas or mixed-use areas. This suggests that both direct and incentive-based instruments can be effective, and that policies combining sustainable financing, flexible zoning, and recognition of local economic goals are more likely to achieve conservation without harming livelihoods.     

Population viability and harvest sustainability for Madagascar lemurs

Subsistence hunting presents a conservation challenge by which biodiversity preservation must be balanced with safeguarding of human livelihoods. Globally, subsistence hunting threatens primate populations, including Madagascar's endemic lemurs. We used population viability analysis to assess the sustainability of lemur hunting in Makira Natural Park, Madagascar. We identified trends in seasonal hunting of 11 Makira lemur species from household interview data, estimated local lemur densities in populations adjacent to focal villages via transect surveys, and quantified extinction vulnerability for these populations based on species-specific demographic parameters and empirically derived hunting rates. We compared stage-based Lefkovitch with periodic Leslie matrices to evaluate the impact of regional dispersal on persistence trajectories and explored the consequences of perturbations to the timing of peak hunting relative to the lemur birth pulse, under assumptions of density-dependent reproductive compensation. Lemur hunting peaked during the fruit-abundant wet season (March–June). Estimated local lemur densities were roughly inverse to body size across our study area. Life-history modeling indicated that hunting most severely threatened the species with the largest bodies (i.e., Hapalemur occidentalis, Avahi laniger, Daubentonia madagascariensis, and Indri indi), characterized by late-age reproductive onsets and long interbirth intervals. In model simulations, lemur dispersal within a regional metapopulation buffered extinction threats when a majority of local sites supported growth rates above the replacement level but drove regional extirpations when most local sites were overharvested. Hunt simulations were most detrimental when timed to overlap lemur births (a reality for D. madagascariensis and I. indri). In sum, Makira lemurs were overharvested. Regional extirpations, which may contribute to broad-scale extinctions, will be likely if current hunting rates persist. Cessation of anthropogenic lemur harvest is a conservation priority, and development programs are needed to help communities switch from wildlife consumption to domestic protein alternatives.     

Determination of 27 pharmaceuticals and personal care products (PPCPs) in water: The benefit of isotope dilution

• Isotope dilution method was developed for the determination of 27 PPCPs in water. • The established method was successfully applied to different types of water samples. • The correction effect of corresponding 27 ILSs over 70 d was investigated. • Benefit of isotopic dilution method was illustrated for three examples. Pharmaceuticals and personal care products (PPCPs) are a unique group of emerging and non-persistent contaminants. In this study, 27 PPCPs in various water samples were extracted by solid phase extraction (SPE), and determined by isotope dilution method using liquid chromatography coupled to tandem triple quadruple mass spectrometer (LC-MS/MS). A total of 27 isotopically labeled standards (ILSs) were applied to correct the concentration of PPCPs in spiked ultrapure water, drinking water, river, effluent and influent sewage. The corrected recoveries were 73%–122% with the relative standard deviation (RSD)<16%, except for acetaminophen. The matrix effect for all kinds of water samples was<22% and the method quantitation limits (MQLs) were 0.45–8.6 ng/L. The developed method was successfully applied on environmental water samples. The SPE extracts of spiked ultrapure water, drinking water, river and wastewater effluent were stored for 70 days, and the ILSs-corrected recoveries of 27 PPCPs were obtained to evaluate the correction ability of ILSs in the presence of variety interferences. The recoveries of 27 PPCPs over 70 days were within the scope of 72%–140% with the recovery variation<37% in all cases. The isotope dilution method seems to be of benefit when the extract has to be stored for long time before the instrument analysis.