环保型塑料产业进展

本文在持续跟踪环保型塑料产业动态的基础上,从原料开发、产品设计、废弃物回收利用等方面,综述了生物基和石油基环保型塑料产业的最新进展,旨在为塑料研发人员和相关产业工作者开拓思路。指出:环保型塑料是未来塑料产业发展的重要方向,非环保型塑料的市场份额将逐步被环保型塑料占据,最后稳定在较低的水平上。     

Permeability of Medical Gloves to Mono- and Dimethacrylate Monomers in Dental Restorative Materials

Dental personnel manually handle methacrylate-based restorative materials, which can cause skin irritation and allergies. The protection given by different types of medical gloves is not well known. Breakthrough time (BTT, min) was used as a measure of protection according to a European standard, using 2 test mixtures consisting of respectively 3 and 5 monomers. Fourteen gloves representing natural rubber latex, synthetic rubber, and synthetic polymeric material were tested. The BTT ranged from some minutes to more than 2 hrs for the 4 monomers with a molecular mass less than 300. The longest protection was recorded for Nitra Touch (nitrile rubber), Tactylon (synthetic rubber), and Metin (PVC).     

Hot Steam Transfer Through Heat Protective Clothing Layers

The aim of this study was to analyse the transfer of steam through different types of textile layers as a function of sample parameters such as thickness and permeability. In order to simulate the human body, a cylinder releasing defined amounts of moisture was also used. The influence of sweating on heat and mass transfer was assessed.

The results show that in general impermeable materials offer better protection against hot steam than semi-permeable ones. The transfer of steam depended on the water vapour permeability of the samples, but also on their thermal insulation and their thickness. Increasing the thickness of the samples with a spacer gave a larger increase in protection with the impermeable samples compared to semi-permeable materials. Measurements with pre-wetted samples showed a reduction in steam protection in any case. On the other hand, the measurements with a sweating cylinder showed a beneficial effect of sweating.     

Performance of Firefighters’ Protective Clothing After Heat Exposure

Heat and mechanical protection properties of 6 fabric combinations commonly used in firefighters’ protective clothing were assessed before and after different heat treatment. It was shown that after heat exposure, the values obtained were generally lower than in the original state. The mechanical properties of the materials were more affected by heat than by heat protective properties. In 2 cases, degradation started before a visible change in the material could be observed, which might be potentially dangerous for the end user who will not realize the alteration of the material.     

Handheld-Assisted Field Data Collection for Occupational Risk Assessment

A computerized handheld procedure is presented in this paper. It is intended as a database complementary tool, to enhance prospective risk analysis in the field of occupational health. The Pendragon forms software (version 3.2) has been used to implement acquisition procedures on Personal Digital Assistants (PDAs) and to transfer data to a computer in an MS-Access format. The data acquisition strategy proposed relies on the risk assessment method practiced at the Institute of Occupational Health Sciences (IST). It involves the use of a systematic hazard list and semi-quantitative risk assessment scales. A set of 7 modular forms has been developed to cover the basic need of field audits. Despite the minor drawbacks observed, the results obtained so far show that handhelds are adequate to support field risk assessment and follow-up activities. Further improvements must still be made in order to increase the tool effectiveness and field adequacy.     

Investigation of Blended Fibre Filtering Materials

Five variants of mixtures of different synthetic fibres at different area ratios were manufactured into needled nonwovens intended to be used as a filtering material for respiratory protection. Two variants were produced according to an earlier patent, and the contents of the other three was completely new. Samples of the nonwovens were tested for sodium chloride particles penetration and for breathing resistance. The results showed that one variant of a nonwoven, designated PP/PPFM, had very valuable filtering properties and that those properties were stable in time.     

Working Life Across Cultures: “Work Life 2000: Quality in Work” and Occupational Health Education in Developing Countries

The article reflects on the changing world of work, and the challenges presented to both occupational health and occupational health education. We draw on the 63 preparatory workshops and the international conference in the “Work Life 2000: Quality in Work” program, an initiative of the Swedish Presidency of the European Union. The International Commission on Occupational Health is introduced, with particular concentration on a current practical project initiated by the Department of Health in South Africa, intended to lead to a set of projects, networking for occupational health education in developing countries. The practical initiatives cast light on a new set of issues that arise when occupational health and safety crosses cultural barriers, and previously separate comparative cases are linked.     

Occupational Health and Social Resources

There is a relationship between the changes in work-related diseases and the following factors: the transformation of the organization of work, organizational development, as well as human and social changes in the work environment. These factors also influence the maintenance of industrial health and safety standards at work. Safety technology will continue to be important, but will be reduced in significance compared to the so-called soft factors, that is, all dimensions and parameters affecting people’s health and social environment at the work place.

It seems that in the future the relationship between the social resource development and work protection will become more relevant. Social resource development influences the quality of work performance and motivation, the quality of work and work protection, the likelihood of accidents and breakdowns, and the level of self-control and capacity of change.

The consequences of work protection research will be discussed in this article with a focus on the contribution of social sciences.     

Effect of Sweating on Insulation of Footwear

The study aimed to find out the influence of sweating on footwear insulation with a thermal foot model. Simultaneously, the influence of applied weight (35 kg), sock, and steel toe cap were studied. Water to 3 sweat glands was supplied with a pump at the rate of 10 g/hr in total. Four models of boots with steel toe caps were tested. The same models were manufactured also without steel toe. Sweating reduced footwear insulation 19–25% (30–37% in toes). During static conditions, only a minimal amount of sweat evaporated from boots. Weight affected sole insulation: Reduction depended on compressibility of sole material. The influence of steel toe varied with insulation. The method of thermal foot model appears to be a practical tool for footwear evaluation.     

医疗保健行业中的纳米材料：职业风险和预防

欧洲职业健康安全署近期发布电子纪要,解释了保健行业工作者在他们工作场所的日常活动中如何与纳米材料发生可能的接触,并提供了预防潜在接触可以采取的措施。这些措施包括国家层面的法律监管、消除与替代、工程控制、管理措施以及个体防护装备（PPE）。作者特编译此文,为国内相关领域提供参考。