联合执法机制在区域环境利益平衡中的应用

在追求环境效应与经济发展获得＂双赢＂的今天,跨行政区域联合执法已经成为平衡区域环境利益、妥善解决区域间环境纠纷,进而促进环境与经济协调发展的重要手段。本文提出了包括组建联合执法小组、主持联合执法会议、建立信息共享平台和实现联合监测的联合执法机制,并概括地阐述了确立长效性执法主体、先期处理制度、联合执法活动、活动监督、异议处理和惩罚制度的具体执行程序。试图利用联合执法的机制来解决区域间环境利益失衡的难题,以期为决策者提供相应的理论支持或政策参考。     

江西省陆地生态系统氮平衡的时空分布规律研究

利用系统物质平衡模型,对1995-2005年江西省陆地生态系统的N收支平衡进行了核算,并分析了不同来源N收支量的时间序列特征以及N盈余强度的空间分布特征,探讨了自然灾害和政策实施对N平衡的影响.结果表明:江西省陆地生态系统的N输入量变化范围是(155.5-184.2)×107kg·a-1,平均值为168.5 ×107 ...     

Minimizing leakage from a smelter off-gas system by enhanced control

The off-gas handling system is a vital component of a smelter and it is essential that it operates in accordance with environmental regulations. A key feature of the off-gas management system is maintaining a slightly negative system pressure to prevent gas leakage, such as SO₂, out into the work and external environments. To enhance sustainable development, there is also growing interest in capturing and reusing the significant amount of heat and CO₂ contained within off-gas. The potential incorporation of heat and CO₂ recovery systems places importance on enhancing control to minimize the risk of both gas leakage and disturbance of the smelting process. With these requirements in mind, an easily implementable feedforward control enhancement to existing control schemes is proposed to help provide improved performance.     

Environmental and economic assessment of a greenhouse waste heat exchange

As the economic costs of energy and the negative externalities associated with the combustion of fossil fuels threaten the economic viability of greenhouses in northern climates there is a renewed interest in the use of waste heat. This paper presents a technical and economic methodology to determine the viability of establishing waste heat greenhouses using the waste heat from industrial processes in northern climates. A case study is presented of an exchange between a tomato greenhouse and a flat glass manufacturing plant, which found the waste heat system is significantly more economic to operate than a purely natural gas system.     

我国当前城乡建设用地置换的实践探索及问题剖析

当前我国城乡建设用地利用存在着城市建设用地指标紧缺、农村建设用地低效利用和城乡建设用地"双增"大量侵占耕地等问题。城乡建设用地增减挂钩政策推动下的城乡建设用地置换有望成为破解该问题的综合途径。2004年开始,伴随相关政策陆续出台,城乡建设用地置换实践在多个省市试点推进,其中江苏省万顷良田建设工程、天津市宅基地换房、山东省农村社区化、重庆市地票交易市场的实践较为典型。基于上述典型案例和系统要素分析,总结了实践的问题、根源与演进,认为目前系统中的要素与相应的操作环节中存在问题隐患且部分问题表现突出;实践中主要以涉及"非自愿"置换、补偿与保障不足、生产生活方式改变等的农民利益受损问题较为突出;问题的根源集中在三个方面,即国家层面的约束性的法律、法规、政策尚不健全,地方政府操作不合理和缺乏科学研究支撑。今后的实践中,应该建立统一的城乡土地市场并逐步完善政府主导下的城乡土地市场运行机制,建立科学合理的征地补偿机制,深入开展相关科学研究,遵循集约型用地增长模式,同小城镇建设紧密结合,注重保护村落景观风貌。     

硫酸系统水平衡分析计算和生产实践

在硫酸系统中,通过水平衡分析计算烟气带入净化工序的SO2体积分数和含水量,确定净化工序的能力,控制干燥塔进口烟气温度,使干吸工序生产出合格产品;通过计算,烟气带入净化工序的水量小于产品带出的水量,制酸净化污水经过污水处理工序处理后返回到净化工序重复使用,实现净化污水零排放,消除对环境的污染.     

动力与热力抬升对烟气抬升高度的影响分析

通过模式选择和计算,得出烟气抬升高度的增加与动能和热能的关系,表明当烟囱出口处风速分别为3 m/s、2 m/s和1 m/s时欲增加同样大小的烟气抬升高度,需要的动能比热能要高,结论认为烟气的热力提升比动力提升的贡献大。     

Nitrogen mass balance in a constructed wetland treating piggery wastewater effluent

The nitrogen changes and the nitrogen mass balance in a free water surface flow constructed wetland （CW） using the four-year monitoring data from 2008 to 2012 were estimated. The CW was composed of six cells in series that include the first settling basin （Cell 1）, aeration pond （Cell 2）, deep marsh （Cell 3）, shallow marsh （Cell 4）, deep marsh （Cell 5） and final settling basin （Cell 6）. Analysis revealed that the NH4＋-N concentration decreased because of ammonification which was then followed by nitrification. The NO4＋-N and NO4＋-N were also further reduced by means of microbial activities and plant uptake during photosynthesis. The average nitrogen concentration at the influent was 37,819 kg/year and approximately 45% of that amount exited the CW in the effluent. The denitrification amounted to 34% of the net nitrogen input, whereas the accretion of sediment was only 7%. The biomass uptake of plants was able to retain only 1% of total nitrogen load. In order to improve the nutrient removal by plant uptake, plant coverage in four cells （i.e., Cells 1, 3, 4 and 5） could be increased.     

Microstructure of 2205 duplex stainless steel joint in submerged arc welding by post weld heat treatment

The 2205 duplex stainless steel (DSS) is of both good properties austenitic steel and ferritic steel, which applies to the shipbuilding industry usually. In this paper, the OM, XRD and microhardness test methods are used to analyze the variation of submerged arc welded (SAW) joints with and without post weld heat treatment (PWHT). The research results show that the σ phase disappear in the fusion edge zone near heat affect zone (HAZ) and an increase in the welded center zone during the follow-up PWHT, while the amount of γ phase is decreased in the welded center zone with PWHT. A segregation distribution of some second phases is also found in the welded center zone after PWHT. There have two pick values of microhardness arise in the fusion edge zone and the welded center zone separately without PWHT. However, a maximum value of microhardness at the fusion edge zone near HAZ is disappeared and the other is still held at the welded center zone during PWHT. It can be attributed to the changes of second phases, element diffusions and particle segregation during PWHT. A developing mechanism is issued to demonstrate the second phases transferring of the 2205 DSS SAW joints by PWHT.     

Improvement of welding heat source models for TIG-MIG hybrid welding process

Tungsten inert gas-metal inert gas (TIG-MIG) hybrid welding process is an effective way to improve welding productivity and quality due to advantages of the two processes. Mathematical analysis is crucial to fundamentally understand this synergetic welding process. In this study, based on experimental visualization of arc behaviors, some assumptions are proposed to deduce adaptive plane and volumetric heat source models separately for each involved welding method first. The influence of torch angles on distribution of temperature and geometry of weld bead are calculated and compared with experimental results. It shows that this developed algorithm of heat source can be employed to accurately predict welding process whether the electrode gun is slanted backward or forward to the direction of welding. Then TIG-MIG hybrid welding process is simulated and analyzed without considering the attractive or repulsive force of two arcs. The characteristic of TIG-MIG welding process is discussed compared to single MIG. It lays the foundation for the further research on the interaction of the two arcs during TIG-MIG hybrid welding.