Developing Canada's National Forest Carbon Monitoring, Accounting and Reporting System to Meet the Reporting Requirements of the Kyoto Protocol

The rate of carbon accumulation in the atmosphere can be reduced by decreasing emissions from the burning of fossil fuels and by increasing the net uptake (or reducing the net loss) of carbon in terrestrial (and aquatic) ecosystems. The Kyoto Protocol addresses both the release and uptake of carbon. Canada is developing a National Forest Carbon Monitoring, Accounting and Reporting System in support of its international obligations to report greenhouse gas sources and sinks. This system employs forest-inventory data, growth and yield information, and statistics on natural disturbances, management actions and land-use change to estimate forest carbon stocks, changes in carbon stocks, and emissions of non-CO₂ greenhouse gases. A key component of the system is the Carbon Budget Model of the Canadian Forest Sector (CBM-CFS). The model is undergoing extensive revisions to enable analyses at four spatial scales (national, provincial, forest management unit and stand) and in annual time steps. The model and the supporting databases can be used to assess carbon-stock changes between 1990 and the present, and to predict future carbon-stock changes based on scenarios of future disturbance rates and management actions.     

Carbon Dioxide Balance of Wood Substitution: Comparing Concrete- and Wood-Framed Buildings

In this study a method is suggested to compare the net carbon dioxide (CO₂) emission from the construction of concrete- and wood-framed buildings. The method is then applied to two buildings in Sweden and Finland constructed with wood frames, compared with functionally equivalent buildings constructed with concrete frames. Carbon accounting includes: emissions due to fossil fuel use in the production of building materials; the replacement of fossil fuels by biomass residues from logging, wood processing, construction and demolition; carbon stock changes in forests and buildings; and cement process reactions. The results show that wood-framed construction requires less energy, and emits less CO₂ to the atmosphere, than concrete-framed construction. The lifecycle emission difference between the wood- and concrete-framed buildings ranges from 30 to 130 kg C per m² of floor area. Hence, a net reduction of CO₂ emission can be obtained by increasing the proportion of wood-based building materials, relative to concrete materials. The benefits would be greatest if the biomass residues resulting from the production of the wood building materials were fully used in energy supply systems. The carbon mitigation efficiency, expressed in terms of biomass used per unit of reduced carbon emission, is considerably better if the wood is used to replace concrete building material than if the wood is used directly as biofuel.     

课堂教学案例开发的思考和实践

本文通过对教学案例涵义及类型进行分析,提出教学案例开发思路与方法,说明案例开发在培养人才中的作用和意义。     

模拟消落带水华暴发行为的数值沙堆模型

以长江最大支流汉江近年来水华污染的现场资料为例,通过氮磷浓度、水温、流速和光照等实测数据构建了消落带开放水域环境体系的数值沙堆模型,描述了藻类生长及水华暴发的动力学机制;利用数值沙堆系统崩塌行为反映出的频率-尺度幂律关系作为判断消落带水域是否暴发水华以及规模大小的依据,采用有限尺度标度分析从不同侧面验证了水华暴发系统的自组织临界性,并揭示出各种拟合参数与水华暴发规模之间的定量关系.研究表明,沙堆模型如果存在良好的幂律关系,相应的消落带水域将暴发水华,且幂律指数越大,水华污染程度越严重.     

城市污泥好氧堆肥过程中能量平衡的理论分析

从热力学角度研究城市污泥的好氧堆肥过程,根据热力学第一定律,建立了好氧堆肥过程中的能量平衡关系,并给出了平衡关系中各参数的计算方法。     

浅析生态系统平衡及其意义

文章简要论述了生态系统的组成、影响生态系统平衡的自然因素和人为因素.生态系统平衡与失衡在自然环境中作用及其意义.生态系统是由各类生物共同组成的生物群落(bioflora)或生物系统(living things'system)与环境系统构成的具有一定结构和功能的一个不断更新和变化的开放系统.但是,生态系统这种维护自身相对平衡的能力是有条件、有一定限度的,或者说,对平衡的干扰不能超过系统本身的遭受极限,否则就会使破坏后的生态系统难于恢复到原来的平衡状态.     

城市生活垃圾场处理技术模糊综合评价

通过对一个待建的城市生活垃圾场处理技术的综合分析，建立一个相对完整的指标体系，然后用模糊数学的方法，对指标体系进行量化、归一化，得到一个通用的评价模型，并运用此模型对该垃圾的垃圾处理方式进行评价，最后提出卫生填埋是当前较为合理的处理方式。     

洪水入海对养殖环境影响的数值分析

基于三维流体动力学和热力学原始方程 ,采用σ坐标变换技术 ,建立了三维斜压场数值模型。模型采用ADI格式求解连续方程和动量方程 ,采用FS法和TVD格式求解各标量方程 ,从而使模型的精度提高到二阶 ,并且节省运算时间。利用建立的三维斜压场数值模型 ,对鸭绿江洪水期形成的低盐水体的分布进行了数值模拟 ,进而分析了鸭绿江洪水入海对黄海北部海域的海水养殖业的可能影响。鸭绿江特大泄洪形成的超低盐混浊水体入侵 ,是筏养扇贝致死的主要原因。及时预报大洪水影响下的低盐水体分布 ,可有效地防止洪水污损灾害。     

基于人工神经网络的行业无害化生产能力评价模型研究

利用BP前向人工神经网络方法 ,建立了一种全新的基于人工神经网络的行业无害化生产能力评价模型 ,该模型采用动量梯度下降反向传播和学习速率自适应调整相结合的训练学习算法。最后 ,以造纸及纸制品业为例 ,对中国各省市造纸行业的无害化生产能力进行评价 ;并进一步分析中国各省造纸行业无害化生产能力的时空分布规律 ,为我国行业规划、布局决策提供科学依据。     

铜川新区建设生态城市发展模式研究

以可持续发展为指导思想，结合生态城市的内涵，提出城乡一体化和生态生产的城市发展思路，建立了土地容量与人口适宜容量数学模型。根据铜川新区具有的自然优势，从自然—社会—经济复合生态角度，针对铜川新区的土地容量与人口适宜容量，探讨了将铜川新区建设成为一个环境优美、人口适宜的生态城市的发展模式。