Economic and environmental value stream map (E2VSM) simulation for multi-product manufacturing systems

Value stream mapping (VSM) is a well-accepted tool within lean manufacturing concept which is often used for analysing and designing the flow of materials and information required to manufacture a product. However, the analysis is static and single product oriented, which fails to cope with either the variation of production plan or a multi-product environment. In addition, the environmental impact of a manufacturing system is highly associated with the dynamic consumption of energy and resources. Despite the recent integration of VSM with simulation or environmental studies (in the domain of energy efficiency), still neglected is the dynamic assessment of all the resources involved in a multi-product production environment. This paper presents a methodology for modelling multi-product manufacturing systems with dynamic material, energy and information flows with the aim to generate economic and environmental value stream maps (E²VSM). The proposed methodology is validated with an industrial case.     

On causes of gigantism in herbaceous plants

Landscape-geochemical features providing for manifestation of gigantism in herbaceous plants have been revealed in natural habitats in the south of Sakhalin and Kunashir islands. Tall herb assemblages have proved to be associated with geochemical landscapes characterized by reducing (gley or hydrogen sulfide) conditions and increased contents of petroleum hydrocarbons and some trace elements (total and movable forms). A hypothesis is put forward that gigantism in herbaceous plants is manifested in zones of active faults, which serve as a kind of conduits supplying endogenous heat, matter, and water to the root systems.     

Influence of temporally variable groundwater flow conditions on point measurements and contaminant mass flux estimations

Monitoring of contaminant concentrations, e.g., for the estimation of mass discharge or contaminant degradation rates, often is based on point measurements at observation wells. In addition to the problem, that point measurements may not be spatially representative, a further complication may arise due to the temporal dynamics of groundwater flow, which may cause a concentration measurement to be not temporally representative. This paper presents results from a numerical modeling study focusing on temporal variations of the groundwater flow direction. “Measurements” are obtained from point information representing observation wells installed along control planes using different well frequencies and configurations. Results of the scenario simulations show that temporally variable flow conditions can lead to significant temporal fluctuations of the concentration and thus are a substantial source of uncertainty for point measurements. Temporal variation of point concentration measurements may be as high as the average concentration determined, especially near the plume fringe, even when assuming a homogeneous distribution of the hydraulic conductivity. If a heterogeneous hydraulic conductivity field is present, the concentration variability due to a fluctuating groundwater flow direction varies significantly within the control plane and between the different realizations. Determination of contaminant mass fluxes is also influenced by the temporal variability of the concentration measurement, especially for large spacings of the observation wells. Passive dosimeter sampling is found to be appropriate for evaluating the stationarity of contaminant plumes as well as for estimating average concentrations over time when the plume has fully developed. Representative sampling has to be performed over several periods of groundwater flow fluctuation. For the determination of mass fluxes at heterogeneous sites, however, local fluxes, which may vary considerably along a control plane, have to be accounted for. Here, dosimeter sampling in combination with time integrated local water flux measurements can improve mass flux estimates under dynamic flow conditions.     

基于超临界水氧化过程的能源环境系统设计

阐述了超临界水氧化过程的工艺路线,介绍了超临界水氧化过程的特点,提出了基于超临界水氧化过程的能源环境系统,设计了几种热量与能量回收系统程的耦合工艺,为提高超临界水氧化过程的经济性奠定了基础。     

循环流化床锅炉掺烧高炉煤气的应用

介绍了高炉煤气的主要燃烧特性,分析了高炉煤气在循环流化床锅炉中掺烧时对炉膛换热、过热蒸汽温度、锅炉负荷、热效率、分离装置以及环境的影响,并提出了消除不良影响的相应措施。     

道路交叉口冲突仿真分析

针对基于事故的安全评价在数量、周期、均值、随机性等方面以及基于现场冲突观测识别在主观性、可靠性、成本、指标全面性等方面存在的问题,提出基于冲突仿真的交叉口安全预评价分析方法:研究利用安全间接分析(SSAM)模型分析冲突的基本原理和冲突时间(TTC)、遭遇时间(PET)等分析指标的计算方法;以及利用VISSIM仿真软件进行冲突仿真分析应注意的策略。以邢台市某道路交叉口安全改善方案为例,进行改善前后冲突仿真的比较分析。研究结果表明,改善后在通行效率显著提升的同时,交叉、追尾、车道变换冲突的数量均显著减少,TTC值有所增加,说明改善后安全程度有所提升。笔者提出的方法和案例应用为道路交叉口改善措施的安全预评价提供了一种分析途径和有益借鉴。     

A New Approach to Plant Diversity Assessment Combining HPLC Data, Simplex Mixture Design and Discriminant Analysis

The quantitative assessment of plant diversity and its monitoring with time represent a key environmental issue for management and conservation of natural resources. Assessment of plant diversity could be based on chemical analyses of secondary metabolites (e.g. flavonoids, terpenoids), because of the substantial quantitative and qualitative between-individual variability in such compounds. At a geographical scale, the plant populations become widely dispersed, and their monitoring from numerous routine individual analyses could become restricting. To overcome such constraint, this study develops a multivariate calibration model giving the relative frequency of a particular taxon from a simple high-performance liquid chromatography (HPLC) analysis of a plant mixture. The model was built from a complete set of mixtures combining different taxons, according to an experimental design (Scheffé’s matrix). For each mixture, a reference HPLC pattern was simulated by averaging the individual HPLC profiles of the constitutive taxons. The calibration models, based on Bayesian discriminant analysis (BDA), gave statistical relationships between the contributions of each taxon in mixtures and reference HPLC patterns of these mixtures. Finally, these models were validated on new mixtures by using outside plants. This new biodiversity survey approach is illustrated on four chemical taxons (four chemotypes) of Astragalus caprinus (Fabaceae). The more differentiated the taxon, the better predicted its contributions (in mixtures) were by BDA calibration model. This new approach could be very useful for a global routine survey of plant diversity.     

建筑物消防系统可靠性分析

为评估建筑物消防系统的可靠性,首先将系统分为探测报警系统和灭火系统等部分,再用事件树法分析事故发生时消防系统不同部分的反应情况.通过贝叶斯理论及历史统计数据得到系统失效率的不确定性概率分布,建立消防系统可靠性随时间变化的数学模型; 用蒙特卡罗方法模拟求得系统可靠性的时间函数并对模型的不确定性参数进行敏感性分析.该方法将统计数据与经验公式、理论方法相结合,并利用蒙特卡罗方法处理模型中的不确定性,不仅能够有效估计消防系统的可靠性,还可对其他类似系统的可靠性进行分析,并通过敏感性分析为进一步减少估计的不确定性提出合理建议.     

航班起飞过程的风险识别与控制

飞机起飞阶段是事故多发阶段,为了进行风险识别与控制,设计了定性判别方法和定量计算仿真算法,并以具体飞机坠毁事故为例分析了安全裕度.分别计算了飞机冲出跑道的速度、距离和逃生时间.中断起飞的速度与时间,是火灾发生后的判断关键,也构成了飞机起飞事故的裕度.结果表明,中断起飞的安全裕度比坠毁的大,且关于中断起飞的规定有矛盾之处;用于逃生的90 s规则高于中断起飞的决断速度的限制规定.该分析方法为处理危急时刻的两难决策问题提供了理论指导.     

出口角度对防烟空气幕防烟效果影响的数值模拟

利用火灾动力学模拟软件FDS,以四川消防研究所高层实验塔二层为原型,模拟在不同防烟空气幕出口角度情况下高层建筑前室烟气运动情况,获得在其他条件不变情况下,空气幕运行时的最佳出口角度。试验结果表明:空气幕角度为5°及20°时,模拟试验后期烟气基本突破了空气幕蔓延至前室内,而当出口角度为10°和15°时防烟效果较好,且15°时防烟效果优于10°,故推荐空气幕运行时的最佳出口角度为15°。