Comparative study on performances of a heat-pipe PV/T system and a heat-pipe solar water heating system

The heat-pipe solar water heating (HP-SWH) system and the heat-pipe photovoltaic/thermal (HP-PV/T) system are two practical solar systems, both of which use heat pipes to transfer heat. By selecting appropriate working fluid of the heat-pipes, these systems can be used in the cold region without being frozen. However, performances of these two solar systems are different because the HP-PV/T system can simultaneously provide electricity and heat, whereas the HP-SWH system provides heat only. In order to understand these two systems, this work presents a mathematical model for each system to study their one-day and annual performances. One-day simulation results showed that the HP-SWH system obtained more thermal energy and total energy than the HP-PV/T system while the HP-PV/T system achieved higher exergy efficiency than the HP-SWH system. Annual simulation results indicated that the HP-SWH system can heat the water to the available temperature (45°C) solely by solar energy for more than 121 days per year in typical climate regions of China, Hong Kong, Lhasa, and Beijing, while the HP-PV/T system can only work for not more than 102 days. The HP-PV/T system, however, can provide an additional electricity output of 73.019 kWh/m², 129.472 kWh/m², and 90.309 kWh/m² per unit collector area in the three regions, respectively.     

A real-time simulating non-isothermal mathematical model for the passive feed direct methanol fuel cell

In order to understand the complex transport phenomena in a passive direct methanol fuel cell (DMFC), a theoretical model is essential. The analytical model provides a computationally efficient framework with a clear physical meaning. For this, a non-isothermal, analytical model for the passive DMFC has been developed in this study. The model considers the coupled heat and mass transport along with electrochemical reactions. The model is successfully validated with the experimental data. The model accurately describes the various species transport phenomena including methanol crossover and water crossover, heat transport phenomena, and efficiencies related to the passive DMFC. It suggests that the maximum real efficiency can be achieved by running the cell at low methanol feed concentration and moderate current density. The model also accurately predicts the effect of various operating and geometrical parameters on the cell performance such as methanol feed concentration, surrounding temperature, and polymer electrolyte membrane thickness. The model predictions are in accordance with the findings of the other researchers. The model is rapidly implementable and can be used in real-time simulation and control of the passive DMFC. This comprehensive model can be used for diagnostic purpose as well.     

The determination and matching analysis of pinch point temperature difference in evaporator and condenser of organic rankine cycle for mixed working fluid

Exergo-economic analysis of the pinch point temperature difference (PPTD) in both evaporator and condenser of sub-critical organic Rankine cycle system (ORCs) are performed based on the first and second laws of thermodynamics. Taking mixture R13I1/R601a as a working fluid and the annual total cost per net output power Z as exergo-economic performance evaluation criterion, the effects of PPTD in evaporator ΔT_e, and the PPTD ratio of condenser to evaporator y, on the exergo-economic performance of ORCs are analyzed. Moreover, how some other parameters influence the optimal PPTD in evaporator ΔT_e,opt and the optimal PPTD ratio of condenser to evaporator y_opt are also discussed. It has been found that the exergo-economic performance of ORCs is remarkably influenced by ΔT_e and y, and there exists ΔT_e,opt and y_opt. In addition, ΔT_e,opt and y_opt are affected by heat transfer coefficient ratio of condenser to evaporator ß, the temperature of working fluid at dew point in condenser T_1a, and composition of R13I1/R601a: larger ß and T_1a lead to lower ΔT_e,opt and y_opt; by contraries, larger mass fraction of R13I1 makes ΔT_e,opt and y_opt increase, and y_opt increases linearly. The effects of the temperature of working fluid at bubble point in evaporator T_3a, mass flow rate of exhaust flue gas m_g, and inlet temperature of exhaust flue gas T_gi on ΔT_e,opt and y_opt are very slight. For comparison, three additional working fluids, namely R601a, R245fa, and 0.32R245fa/0.68R601a, are also taken into account.     

Experimental investigation of a 250-kW turbine organic Rankine cycle system for low-grade waste heat recovery

An organic Rankine cycle (ORC) is generally used for converting low-grade heat into electricity. In this study, an extensive literature survey was conducted to identify current research gaps on experimental ORC systems. Specifically, there is limited experimental data and limited details on thermal and expander efficiencies of ORC systems. In order to address these gaps, the objective of this study included developing a turbine ORC with a power output exceeding 50 kW and thermal efficiency exceeding 8% for a heat source temperature < 120°C. The experimental results indicated that the system achieved a net power output of 242.5 kW and a thermal efficiency of 8.3% (the highest value for a turbine ORC system for the heat source temperature below 120°C). Thus, the study addressed the gaps identified in the research area of ORCs.     

城镇化与工业化对能源强度影响的实证研究——基于截面相关和异质性回归系数的非平衡面板数据模型

城镇化、工业化对中国能源强度的影响如何?如何在快速推进城镇化、工业化进程的同时确保节能减排目标的实现?论文以能源强度指标代替传统的能源消费指标来反映能源综合利用效率,并应用考虑截面相关性和异质性回归系数的非平衡面板数据模型,使用共同相关效应组均值(CCEMG)估计方法对中国1978-2014年城镇化、工业化与能源强度之间的关系进行分析。研究结果表明:人均实际GDP增长1%,能源强度将会降低0.412%,工业化水平增长1%,能源强度将会上升0.630%,而由于生产消费等经济活动的增加、高度集中化以及规模经济的综合作用,使得城镇化对能源强度的影响并不确定。联系研究结论,本文提出政策建议:我国应加快产业结构升级,转变经济增长方式;构建绿色制造体系,推进"五化"协同发展;推进绿色、循环、低碳发展的新型城镇化建设,提高城镇化质量,提升我国整体的能源效率,确保节能减排目标的实现,推动经济全面、协调、可持续发展。     

近52年来洞庭湖流域气象干旱的时空分布特征

基于洞庭湖流域84个气象站点1962~2013年的逐日气象资料,利用综合干旱指数(CI)对洞庭湖流域气象干旱的时间和空间特征进行分析。结果表明:在过去52 a,区域性干旱强度较强的时段以夏季、秋季、夏秋和秋冬时节为主;区域干旱强度在春季、夏季、夏秋、冬季呈上升趋势;秋冬时节和年干旱强度变化不明显;春夏时节、夏秋时节、秋冬时节和冬春时节的平均干旱强度比春、夏、秋、冬单个季节的平均干旱强度大。小波分析表明,区域干旱强度的周期以10a为主周期,5 a和22 a为次周期。近52 a来,历年干旱站次比主要集中于10%~30%之间,多表现为区域性干旱,以夏季和秋季的干旱范围较大;干旱频率高发时期主要为夏季、夏秋时节和秋季。干旱频率高发地主要以流域的南部山地和北部的洞庭湖平原为主,西北部的山地发生干旱相对较少,衡邵盆地随季节变化干旱频率易发生高低值转换。     

长江中游城市群空间联系研究

基于城市流强度模型和城市间相互作用模型,以长江中游城市群27个地级市为研究对象,分析了城市群内的城市辐射能力及其内在的经济联系。结果表明:(1)长江中游城市群整体集聚和辐射能力较弱,区域内中低级城市流强度的城市占多数;(2)城市群内第二、三产业辐射能力存在较大差异,第二产业呈现出较强的辐射能力,而第三产业辐射能力较弱,并且其空间分布相对较为分散;(3)区域中心城市的核心带动作用总体较弱,辐射范围和辐射强度都有待加强;(4)长江中游城市群内城市间空间联系不够紧密,且联系程度空间差异较大。省际城市之间联系贫乏,城市间尚未形成联系紧密的辐射网络。     

近60a长三角地区极端高温事件变化特征及其对城市化的响应

基于长三角地区1951~2014年56个国家级气象站点逐日气温记录资料,通过计算极端高温事件相关指标(极端最高温TXx,极端最低温TNn,高温日数Htd和低温日数Ltd),利用GIS空间分析技术和Mann-Kendall时间趋势分析方法分析了长三角地区近60 a极端高温事件的空间分异特征和时间变化趋势,并探讨了城市化发展对区域极端高温事件时空变异的影响。结果表明:(1)长三角地区极端高温事件指标均表现为一定的上升趋势,极端低温指标(TNn和Ltd)线性变化趋势比极端高温指标(TXx和Htd)更为显著,变化趋势最显著的地区集中在经济和城市化水平较高的城市及周边地区(如上海、杭州等)。(2)极端高温指标(TXx和Htd)多年平均总体表现为南高北低,西高东低的趋势,而极端低温指标中TNn多年平均为由中部向南北两侧降低,Ltd多年平均呈现自中部向南北南侧增多的趋势。(3)从1990~2000到2000~2010年,城市化对极端高温事件的影响增强,快速城市化对北部城市极端高温事件的影响高于南部城市。     

光照条件对跑道池光生物反应器内蛋白核小球藻生长特性的影响

本文采用多孔曝气管的曝气方式,以蠕动泵为藻液循环的动力,研究了气体流量、光照强度、光照周期等因素对跑道池光生物反应器内蛋白核小球藻生长与代谢特性的影响,并利用傅里叶红外光谱半定量法对不同光照条件下藻细胞内蛋白质、油脂以及多糖含量变化进行了分析。研究结果表明,适当的气体流量、光照强度和光照周期有利于跑道池内蛋白核小球藻细胞的生长和代谢。在本实验条件下,在最佳气体流量2 000 m L/min条件下,光照强度为3 500μW/cm2,光照周期为16∶8时最有利于蛋白核小球藻的生长;光照强度为2 000μW/cm2和光照周期为16∶8的条件均有利于藻细胞内油脂的积累。     

密相塔半干法烟气脱硫塔内加湿降温及其对脱硫效率的影响

为了实现密相塔半干法脱硫工艺的精确加湿进一步提高系统脱硫效率,利用推导出的传热传质计算方法,得到烟气温度降低和加水量的关系.结合3组密相塔半干法工程实际数据,发现理论计算值和实测值误差区间仅为2.9％ ～5.4％.通过选取河北某钢厂210 m2烧结烟气密相塔半干法脱硫项目实际在线检测数据,发现循环脱硫灰含湿量为3％的系统脱硫效率整体高于含湿量为5％和4％的样品,最大值达93.56％.通过粒度分析、扫描电镜、X射线衍射及差热-热重对2种不同含湿量的循环脱硫灰进行表征,结果表明,含湿量为3％的循环脱硫灰较含湿量为5％的样品粒径小、比表面积大,无团聚现象,物相分析还证实相对于含湿量为5％样品,其Ca(OH)2和结晶水含量少,几乎都是CaSO4和CaS03干态物质,因此脱硫反应进行彻底,脱硫效率较高.