哈尔滨市蔬菜生产基地土壤重金属污染状况评价

根据对哈尔滨市所辖8区蔬菜生产基地土壤环境的调查和监测,利用土壤综合污染指数进行评价,哈尔滨市蔬菜生产基地土壤质量状况。     

南海重点海洋倾倒区表层沉积物富集特征及其潜在生态风险评价

根据2005南海三个重点海洋倾倒区,即九澳岛重点海洋倾倒区、黄茅岛重点海洋倾倒区、汕头重点海洋倾倒区的监测,分析其表层沉积物重金属的监测资料,采用富集系数法和Hakanson潜在生态危害系数法对其富集度和潜在生态危害程度进行了分析和评价.结果表明:在三个倾倒区表层沉积物所监测的重金属中,Cu和Pb元素的富集度相对最高,Hg和Cd元素的富集度较低,从空间上看,潜在生态危害系数评价结果显示,南海三个重点海洋倾倒区表层沉积物中的重金属对海洋生态系统的潜在生态危害非常轻微,均属于轻微潜在生态危害范畴,其中轻微潜在生态危害程度相对较重的是Cd和Hg元素,Cu和Pb元素的轻微生态危害程度较轻.     

基于B/S+C/S的矿山安全标准化管理信息系统研究

首先介绍了安全标准化实施的关键步骤、技术特点及其在矿山的应用,通过现场调研、安全培训,危害辨识与风险评价、文件汇编等环节在山西某矿山建立了安全标准化管理信息系统,在此基础上开发了与之相配套的、基于B/S和C/S混合模式的、在局域网上运行的应用软件--矿山安全标准化管理信息系统.系统由统一信息发布平台、即时报警系统、安全记录管理系统、统计分析系统等14个子系统组成.系统的应用提升了矿山安全生产整体水平,实现了矿山安全标准化和信息化.     

辽河稠油热采现场硫化氢的防范与治理建议

硫化氢是一种剧毒和较强腐蚀性的气体,近年来在辽河油田一些地区相继出现,特别是稠油热采区块出现了较高浓度的硫化氢。硫化氢的存在已经威胁到油田的安全生产,并成为油气勘探开发过程中必须解决的问题。本文对辽河油气稠油热现场硫化氢的预防与治理提出了一些建议。     

太湖表层沉积物重金属污染评价与来源分析

对太湖湖区表层沉积物中11种重金属的总量进行调查分析,借助地累积指数法和潜在生态风险指数法分析了重金属的污染程度和生态风险,并利用主成分分析-绝对主成分分数-多元线性回归受体模型对重金属来源进行解析.结果显示太湖沉积物中Cd、Sb含量平均值分别为江苏省土壤背景值的4.29倍和3.18倍,地累积指数表明Cd和Sb为偏中度...     

长江口潮滩沉积物中活性重金属的空间分异及控制机制

利用盐酸羟氨-25%醋酸溶液,提取了长江口潮滩沉积物中活性重金属含量。研究发现,长江口潮滩沉积物中活性重金属占总量的百分含量依次为Cu 26%,Pb 36%,Fe 7%,Mn 49%,Zn 32%,Cr 14%和Al 16%,沉积物基本未受到Cr污染,其余重金属污染程度处于中等偏下水平。除Zn、Cr外,其余活性重金属在夏季沉积物中的含量明显低于春季,其主要原因是夏季风暴潮将大量细颗粒泥沙及其富集的重金属带离潮滩进入了河口水体中。受点源污染排放及沉积物粒度影响,活性重金属在长江口南岸的浒浦、顾路和浦东机场出现峰值含量,且高潮滩含量明显高于中、低潮滩。在垂向上,重金属一般在沉积物表层或亚表层形成富集。在口门附近的滨岸潮滩沉积物中,Cu、Pb的空间分异主要受早期成岩作用的控制,在污染较为严重、水动力作用相对较弱的潮滩沉积物中,Cu、Pb的空间分异主要受沉积物中有机质含量变化的控制.     

The Response of Hydrophytes to Environmental Pollution with Heavy Metals

The effects of Cu²⁺, Cd²⁺, and Ni²⁺ at low and high concentrations (0.025 and 0.25 mg/ml) on the accumulation capacity, the state of the pigment complex, and photosynthesis rate have been studied in model experiments with three floating hydrophytes (Hydrocharis morsus-ranae L., Lemna gibba L., and Potamogeton natans L.) and four submerged hydrophytes (Elodea canadensis Michx., Lemna trisulka L., Ceratophyllum demersum L., and Potamogeton lucens L.). Copper and cadmium are especially toxic at the concentrations studied. The effect of Cu²⁺ was the strongest in hydatophytes, and the effect of Cd²⁺, in pleustophytes. It is hypothesized that the differences between hydrophytes with respect to accumulation of metals and decrease in photosynthesis rate may cause predominant elimination of submerged species. Therefore, changes in the species structure of hydrophyte communities may be expected in waters polluted with metals.     

经济发达县域耕地土壤重金属污染评价及其影响因素分析——以江苏省昆山市为例

通过对昆山市14个区镇91个土壤样品中As、Cd、Cr、Cu、Pb、Ni、Hg、Zn 8种重金属测定分析,对该市耕地土壤重金属污染进行评价并进行重金属污染的影响因素分析.结果表明,昆山市耕地土壤存在不同程度的轻微污染,重金属Cd、Cr、Cu、Pb、Hg、Zn均超过国家土壤背景值,旱地、水田中均以Hg污染范围较广、变异系数较大.综合污染指数表现为水田(1.15)＞旱地(1.00).区镇耕地重金属污染评价表明千灯、陆扬、石浦、锦溪、石牌处于警戒值之内,蓬朗、周庄、张浦、正仪、周市、巴城、淀山湖、花桥、陆家轻度污染;昆山市耕地土壤中重金属元素均未超过土壤环境基本容量,能够保证作物品质和农业持续发展.同时,研究表明区域重金属轻微污染具有复合污染的特性,Cd、Pb相关性最高(P=0.621 0), Pb与Hg、Cu、Zn、Cu与Cr也有相关性(0.438 7、0.426 0、0.350 9、0.394 0),区域重金属的轻微污染受人为因素影响显著,研究指出应加强对区域优先控制污染物Hg、次优先控制污染物Pb、Cd、Zn、Cu、Cr的控制与治理.     

金属材料海水腐蚀试验方法的编制及标准解读

为了使相关人员更好地理解标准,更好地完成试验,回顾了我国金属材料海水腐蚀试验方法和标准的编制历程,对金属材料海水腐蚀试验的两个现行国家标准进行了解读和比较。     

Comparative evaluation of sizing of metal hydride (MH) hydrogen storage tank filled with different alloys

This study presents a comparative analysis of sizing of metal hydride tank filled with different alloys. Alloys include solid solutions and intermetallic compounds of the generic families AB₅, AB₂, AB, A₂B. The effects of the different alloys on the sizing of metal hydride hydrogen storage tanks are complicated and depend on many factors. In this paper, a thermoeconomic optimization analysis with a simple algebraic formula was presented for the estimation of optimum metal hydride tank surface area for heat transfer enhancement. The optimum area of the metal hydride tank filled with commercially available different alloys (LaN₅, Ti_0,98Zr_0,02V_0,43Fe_0,09Cr_0,05Mn_1,5, TiFe, Mg₂NiH₄) was evaluated and compared by the developed method. The optimum net savings and the value of payback were determined for four alloys. It is found that mathematical model can be employed for the determination of optimum metal hydride tank design and increasing net savings according to alloy types. The optimum areas of the tanks filled with four alloys (LaN₅, Ti_0,98Zr_0,02V_0,43Fe_0,09Cr_0,05Mn_1,5, TiFe, Mg₂NiH₄) were calculated as 0.136, 0.130, 0.133, and 0.173 m², respectively. The optimum net savings for tanks filled with four alloys (LaN₅, Ti_0,98Zr_0,02V_0,43Fe_0,09Cr_0,05Mn_1,5, TiFe, Mg₂NiH₄) are about 461.0, 409.3, 419.6, and 979.6 $ and the values of payback are about 1.98, 2.1, 2.17, and 1.37 years, respectively. Excessive area of the metal hydride tank would not be as economical as the optimum tank area. Thermal management of metal hydride tank must be designed for optimum points calculated at which maximum savings occur.