用AutoCAD软件对弯管芯棒进行快速图解设计

介绍了利用AutoCAD软件对管材弯曲工艺中弯管芯棒进行快速图解设计的方法。利用该法可对不同弯曲半径、弯曲角度、壁厚的管材的弯管芯棒进行快速优化设计。利用Auto CAD进行图解法设计的弯管芯棒尺寸准确 ,结构合理 ,加工工艺性好 ,使用寿命长     

浙江安吉地区地质灾害及其防治对策

本文介绍了安吉地区地质灾害的调查概况，对其成因类型，时空分布，与地质环境的关系和防治对策作了探讨，这圣方政府编制地质灾害防治规划具参考意义。     

太湖梅梁湾水体中可见光的衰减、吸收及散射

对太湖梅梁湾沿岸带和敞水区的水体进行了光学特性研究。结果发现，沿岸带的水下光辐射衰减系数(Kd)值较敞水区小；400nm与500nm向上辐照度比值(Eu440／Eu550),沿岸带在1m左右最小,敞水区在0．5m左右最小;沿岸带的水面下向上辐照度与向下辐照度的比值(R)低于敞水区：440、550、670nm的后向散射与吸收的比值(b／a),在沿岸带的1m处最大,敞水区在0．5m处最大。这些结果说明,相对于敞水区而言,沿岸带的光衰减较弱,无机悬浮颗粒的含量较少,最大叶绿素a分布较深。     

The influence of sewage sludge properties on sludge-borne metal availability

With the advent of more stringent controls on wastewater treatment, sewage sludge production in Europe and many parts of the world is increasing. With this increase comes the problem of sludge disposal, and recycling to land arguably offers an economically and environmentally sustainable option. However, a major limitation of sewage sludge reuse is the potential release of heavy metals from the sludge and heavy metal accumulation to toxic levels in topsoils. The properties of the sludge play a crucial role in determining the initial release and subsequent availability of heavy metals in amended soils. Bioavailable forms of heavy metals in recently amended soils are most likely to be those that are bioavailable in the sewage sludge. In this paper, published research on the importance of sewage sludge characteristics on metal release and bioavailability will be reviewed and contrasted with original research. A selection of sludges from around Australia has been collected for this purpose. Through the use of incubation studies, isotope dilution techniques, ion-selective electrode measurements and ¹³C-NMR spectroscopy, the importance of a range of sludge properties on heavy metal behaviour in sludges and sludge-amended soils is addressed.     

Trace element speciation in selected smelter-contaminated soils in Anaconda and Deer Lodge Valley, Montana, USA

Long-term copper smelting in the Anaconda and Deer Lodge Valley area of Montana has resulted in an extensive area of trace element contamination. Aerial extent of contamination is generally established, but total analysis of soils does not correlate to relative degree of impact on vegetation growth. Three pedons (Beaverell, Cetrack and Judco) were analyzed by routine soil characterization methods, aqua regia microwave digestion, sequential chemical extraction, and X-ray diffraction analysis with the objective of providing a better understanding of chemical forms and potential reactivity of selected trace elements (Cd, Co, Cr, Cu, Hg, Mn, Ni, P, Pb). Surface horizons of soils are more acidic than subsoils, with pH for all horizons ranging from 4.0 to 8.7. Beaverell is the most contaminated in the upper 20 cm with the sum of total extractable (SUM_TE) trace elements by microwave digestion ranging from 1836 to 3605 mg kg⁻¹, largest H₂O-soluble (WS) and exchangeable (EX) fractions (e.g. 1.6 and 9.3%, respectively), and smallest residual (RES) fraction (e.g. 14.3%). Cetrack has greater SUM_TE elements than Judco, though a lower WS+EX fraction due to the effects of alkaline pH, carbonates and high P. Oxide (OX), organic matter/sulfide (OM/S), and RES fractions predominate over WS, EX, and specially-sorbed/carbonate-bound fractions (SS/CAR) for all horizons. Copper, Zn, Pb and Cd are elevated in surface over subsurface horizons in these latter fractions, indicating these elements were anthropogenic additions. X-ray data indicate that Pb, Cu, Cr and Cd partially exists as both OX and sulfide mineral forms.     

利用EXCEL求算水中非离子氨

Excel是办公自动化中非常重要的一款软件，它的数据处理功能在现有的文字处理软件中可以说是独占螯头，通过简单的学习，结合国家标准给出的换算公式，利用EXCEL编制程序，方便快捷地计算水中非离子氨浓度，计算结果表明，当实际测得水温和pH与表中数据吻合时三种计算方法结果无明显差异，当实际测得的水温和pH与表中不对应时，查表法存在明显偏差，而使用EXCEL运算就能与笔算结果一致，准确可靠。     

某电镀厂附近农田土壤中的重金属形态研究

通过连续提取法对电镀废水污染区和对照区农田土壤中的重金属元素Cu、Cr、Ni、Pb和Mn形态进行了研究.结果显示,污染区土壤中多种形态的Cu、Cr和Ni含量都显著高于对照区,尤其以它们的有机结合态差异最为显著.污染区较对照区土壤中Mn的总量虽无显著差异,但可交换态Mn的含量显著增加(分别为98.68mg/kg和40.75mg/kg).污染区与对照区土壤中的Pb的交换态、碳酸盐结合态、Fe-Mn氧化物结合态、有机结合态和残留态均无显著差异.电镀废水的污染使得农田土壤中Cu、Cr和Ni含量和生物有效性显著升高,Mn的化学形态改变,移动性和生物有效性增加.     

处理重金属废水技术的研究进展

如何消除工业废水中重金属对环境和人类健康的危害,并且能够有效地回收废水中的贵重金属离子是环境保护工作者需解决的热点问题之一.详细地介绍了近十几年来国内外,处理重金属废水的技术方法,包括传统方法中的化学沉淀法、电化学法、吸附法和膜分离法,新出现的技术方法如分子印迹法和光催化法,并对以上各种技术方法的机理、研究进展、优点和所面临的主要问题进行了综合评述,同时阐述了处理重金属废水的技术和方法的发展趋势和应用前景.     

重金属在牡蛎(Crassostrea virginica)中的生物积累及其影响因素的研究

牡蛎软体，贝壳和沉积物中Ｃｄ、Ｃｒ、Ｃｕ、Ｆｅ、Ｍｎ、Ｐｂ和Ｚｎ等重金属元素被同步分析研究，研究结果表明，重金属在牡蛎中的生物积累是牡自身的新陈代谢、重金属元素的地球化学性质和环境诸因素综合影响的结果，其中牡蛎斩生理作用对重金属在软体中的积累产生的影响尤为重要，而贝壳中重金属的积累对来自环境的影响更为敏感。     

Removal of heavy metals (Cr6+,Ni2+)from polluted water using decaying leaves of plane (Plantanus orientalis)

plane decaying leaves have been found capable of removing chromium and nickel ions from aqueous solutions. The removal efficiency depends upon the pH conditions, ions components and concentrations, and concentrations of leaves in media. The maximum removal for unique Cr⁶⁺ is about 7.5-8.0g/kg leaves at pH 4. 0, for unique Ni²⁺ about 2. 6g/kg at the region of PH5. 0-5.5. Under the described conditions nickel increases chromium uptake by plane decaying leaves from solution.